OPV230 Equivalent & Substitute Parts

Part Overview

The OPV230 is a laser diode operating at 850nm wavelength with 4.5mW output power and 30mA current rating in a radial T-1 package (3mm diameter). This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing system support and new designs. The OPV230 maintains REACH compliance and operates under unlimited moisture sensitivity conditions (MSL 1).

Substiute Parts

OPV230

TT Electronics/Optek TechnologyIn Stock: 737OPV230 Datasheet

Current PartRFQ

OPV330

TT Electronics / Optek TechnologyIn Stock: 1437OPV330 Datasheet

MFR RecommendedRFQ

OPV330

TT Electronics / Optek TechnologyIn Stock: 1437OPV330 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the OPV230 is determined by the following critical parameters:

• Wavelength: 850nm (must match)
• Package configuration: Radial T-1 (3mm diameter) (must match)
• REACH and export compliance status (must maintain or improve)
• Moisture sensitivity classification (must be equivalent or better)

The OPV330 qualifies as a manufacturer-recommended substitute based on matching wavelength (850nm) and identical package geometry (Radial T-1, 3mm). Both components share the same REACH unaffected status and MSL 1 classification. The OPV330 is currently in active production status, addressing the obsolescence of the OPV230.

Parameter Comparison

Engineering Selection Recommendations

The OPV330 is the manufacturer-designated substitute for the obsolete OPV230. Both components share identical wavelength (850nm) and package configuration (Radial T-1, 3mm diameter), ensuring mechanical and optical compatibility.

The OPV330 operates at reduced power output (1.5mW versus 4.5mW) and lower current rating (20mA versus 30mA). Applications requiring the full 4.5mW output specification of the OPV230 cannot use the OPV330 as a direct functional replacement. However, for systems tolerant of lower optical power levels, the OPV330 provides an active, production-supported alternative with improved RoHS3 compliance status.

Both parts maintain identical REACH unaffected status and MSL 1 classification, ensuring equivalent environmental and regulatory compliance profiles.

Frequently Asked Questions (FAQ)

Q: Can the OPV330 directly replace the OPV230 in all applications?

A: The OPV330 matches the OPV230 in wavelength (850nm) and package geometry (Radial T-1, 3mm). However, the OPV330 delivers 1.5mW output compared to the OPV230's 4.5mW. Direct substitution is only suitable for applications where the lower power output is acceptable.

Q: Are there mechanical compatibility concerns between OPV230 and OPV330?

A: No. Both components use identical radial T-1 package configuration with 3mm diameter, ensuring mechanical interchangeability in circuit board layouts and mechanical assemblies.

Q: What is the compliance difference between these parts?

A: The OPV330 carries ROHS3 compliance certification, whereas the OPV230 does not specify RoHS status. Both maintain REACH unaffected status and identical MSL 1 classification. The OPV330 represents improved environmental compliance for new designs.

Q: Why is the OPV230 obsolete?

A: The OPV230 is classified as obsolete by the manufacturer. The OPV330 is the active production equivalent, ensuring long-term availability and supply chain continuity.

Q: Are there electrical parameter differences that affect circuit design?

A: Yes. The OPV330 operates at 20mA maximum current versus the OPV230's 30mA, and produces 1.5mW versus 4.5mW output power. Circuit designs must accommodate these reduced electrical and optical specifications.