OPV222 Equivalent & Substitute Parts

Part Overview

The OPV222 is a laser diode operating at 850nm wavelength with 4.5mW output power and 30mA current rating in a pill package configuration. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system support and new design implementations. The OPV222 represents a higher-power variant within the 850nm laser diode family, and substitute selection must account for the significant difference in power output specifications.

Substiute Parts

OPV222

TT Electronics/Optek TechnologyIn Stock: 906OPV222 Datasheet

Current PartRFQ

OPV322

TT Electronics/Optek TechnologyIn Stock: 1375OPV322 Datasheet

MFR RecommendedRFQ

OPV322

TT Electronics/Optek TechnologyIn Stock: 1375OPV322 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification for the OPV222 is based on the following critical parameters:

• Wavelength Match: 850nm operation is maintained across all substitute candidates
• Package Compatibility: Pill package configuration is preserved
• Manufacturer Continuity: TT Electronics/Optek Technology remains the source manufacturer
• Regulatory Compliance: REACH and ECCN classifications remain consistent

The OPV322 is identified as the manufacturer-recommended substitute. This substitution involves a reduction in power output from 4.5mW to 1.5mW and a corresponding decrease in current rating from 30mA to 7mA. The OPV322 operates at 2.2V input voltage and maintains the same 850nm wavelength and pill package format. This substitute is classified as active product status with ROHS3 compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The OPV322 is the manufacturer-recommended substitute for the obsolete OPV222. Selection of this substitute is appropriate for applications where the reduced power output of 1.5mW is compatible with system requirements. The OPV322 maintains active product status, ensuring ongoing availability and supply chain continuity. The component carries ROHS3 compliance certification, meeting current environmental and regulatory standards. Both components share identical wavelength specifications, package configuration, and regulatory classifications, supporting direct substitution within compatible power budget constraints.

Frequently Asked Questions (FAQ)

Q: Can the OPV322 be used as a direct replacement for the OPV222?

A: The OPV322 is the manufacturer-recommended substitute. Both components operate at 850nm wavelength in pill package configuration. However, the OPV322 delivers 1.5mW output power compared to the OPV222's 4.5mW. Substitution is valid only when system design accommodates the lower power output specification.

Q: What is the primary difference between the OPV222 and OPV322?

A: The primary difference is power output. The OPV222 operates at 4.5mW with 30mA current rating, while the OPV322 operates at 1.5mW with 7mA current rating. Both maintain 850nm wavelength operation and pill package format.

Q: Are there compliance differences between these components?

A: Both components share identical REACH and ECCN classifications. The OPV322 carries ROHS3 compliance certification, while the OPV222 status is not specified. Both maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the input voltage requirement for the OPV322?

A: The OPV322 operates at 2.2V input voltage. The OPV222 input voltage specification is not provided in the component documentation.

Q: Is the pill package identical between both components?

A: Both the OPV222 and OPV322 use pill package configuration, supporting mechanical compatibility in standard mounting applications.