Request Quote
(Ships tomorrow)
OPA695IDBVR Equivalent & Substitute Parts
Part Overview
The OPA695IDBVR is a Current Feedback Amplifier manufactured by Texas Instruments, housed in a SOT-23-6 surface mount package. This single-circuit operational amplifier is designed for high-speed signal processing applications requiring wide bandwidth and fast slew rate performance. The device is Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance parameters and compatible packaging options are required for design flexibility, supply chain alternatives, or specific application constraints.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | Current Feedback | — |
| Number of Circuits | 1 | — |
| Slew Rate | 4300 | V/µs |
| -3dB Bandwidth | 1.7 | GHz |
| Current - Input Bias | 20 | µA |
| Voltage - Input Offset | 300 | µV |
| Current - Supply | 12.9 | mA |
| Current - Output / Channel | 120 | mA |
| Voltage - Supply Span (Min) | 5 | V |
| Voltage - Supply Span (Max) | 12 | V |
| Operating Temperature | -40 to 85 | °C |
| Mounting Type | Surface Mount | — |
| Package / Case | SOT-23-6 | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitution of the OPA695IDBVR is determined by strict alignment of the following electrical and mechanical parameters:
Primary Substitution Criteria:
- Amplifier Type: Current Feedback (mandatory match)
- Number of Circuits: 1 (mandatory match)
- Slew Rate: ≥4100 V/µs (high-speed performance tier)
- -3dB Bandwidth: ≥1.35 GHz (wide bandwidth requirement)
- Current - Input Bias: ≤20 µA (input characteristics)
- Voltage - Supply Span: Overlapping range with 5V minimum and 12V maximum
- Operating Temperature: Compatible range (-40°C minimum, 85°C or higher maximum)
- Mounting Type: Surface Mount (package form factor)
- RoHS3 Compliance: Required
- Moisture Sensitivity Level: MSL 1 or MSL 3 acceptable
Substitute Parts Identified:
Group 1: High-Performance Surface Mount (Bandwidth ≥1.35 GHz)
- AD8000YCPZ-REEL7 (8-LFCSP, 1.35 GHz)
- AD8000YRDZ (8-SOIC-EP, 1.58 GHz)
- AD8000YRDZ-REEL7 (8-SOIC-EP, 1.58 GHz)
Group 2: Through-Hole Alternatives (Bandwidth 380-880 MHz)
- 5962-9459301MPA (8-CERDIP, 380 MHz)
- AD8001ANZ (8-PDIP, 880 MHz)
- AD8001AQ (8-CERDIP, 880 MHz)
Group 3: Compact Surface Mount (Bandwidth 715-795 MHz)
- AD8001ARTZ-REEL7 (SOT-23-5, 795 MHz)
- AD8001ARZ (8-SOIC, 715 MHz)
- AD8001ARZ-REEL7 (8-SOIC, 715 MHz)
Group 4: Low-Power Alternative (Bandwidth 270 MHz)
- AD8005ARTZ-REEL7 (SOT-23-5, 270 MHz)
Parameter Comparison
| Part Number | Manufacturer | Amplifier Type | Slew Rate (V/µs) | -3dB Bandwidth (GHz) | Input Bias (µA) | Input Offset (mV) | Supply Current (mA) | Output Current (mA) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Package | Mount Type | MSL |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OPA695IDBVR | Texas Instruments | Current Feedback | 4300 | 1.7 | 20 | 0.3 | 12.9 | 120 | 5 | 12 | -40 to 85 | SOT-23-6 | Surface Mount | 1 |
| AD8000YCPZ-REEL7 | Analog Devices Inc. | Current Feedback | 4100 | 1.35 | 5 | 1 | 13.5 | 100 | 4.5 | 12 | -40 to 125 | 8-LFCSP (3x3) | Surface Mount | 3 |
| AD8000YRDZ | Analog Devices Inc. | Current Feedback | 4100 | 1.58 | 5 | 1 | 13.5 | 100 | 4.5 | 12 | -40 to 125 | 8-SOIC-EP | Surface Mount | 3 |
| AD8000YRDZ-REEL7 | Analog Devices Inc. | Current Feedback | 4100 | 1.58 | 5 | 1 | 13.5 | 100 | 4.5 | 12 | -40 to 125 | 8-SOIC-EP | Surface Mount | 3 |
| 5962-9459301MPA | Analog Devices Inc. | Current Feedback | 1200 | 0.38 | 5 | 2 | 5 | 70 | 6 | 12 | -55 to 125 | 8-CERDIP | Through Hole | 1 |
| AD8001ANZ | Analog Devices Inc. | Current Feedback | 1200 | 0.88 | 5 | 2 | 5 | 70 | 6 | 12 | -40 to 85 | 8-PDIP | Through Hole | 1 |
| AD8001AQ | Analog Devices Inc. | Current Feedback | 1200 | 0.88 | 5 | 2 | 5 | 70 | 6 | 12 | -40 to 85 | 8-CERDIP | Through Hole | 1 |
| AD8001ARTZ-REEL7 | Analog Devices Inc. | Current Feedback | 1200 | 0.795 | 5 | 2 | 5 | 70 | 6 | 12 | -40 to 85 | SOT-23-5 | Surface Mount | 1 |
| AD8001ARZ | Analog Devices Inc. | Current Feedback | 1200 | 0.715 | 5 | 2 | 5 | 70 | 6 | 12 | -40 to 85 | 8-SOIC | Surface Mount | 1 |
| AD8001ARZ-REEL7 | Analog Devices Inc. | Current Feedback | 1200 | 0.715 | 5 | 2 | 5 | 70 | 6 | 12 | -40 to 85 | 8-SOIC | Surface Mount | 1 |
| AD8005ARTZ-REEL7 | Analog Devices Inc. | Current Feedback | 280 | 0.27 | 5 | 5 | 0.4 | 10 | 4 | 12 | -40 to 85 | SOT-23-5 | Surface Mount | 1 |
Engineering Selection Recommendations
For Direct High-Performance Replacement (Bandwidth ≥1.35 GHz):
The AD8000YRDZ and AD8000YRDZ-REEL7 provide the closest electrical performance match to the OPA695IDBVR. Both devices maintain slew rate performance at 4100 V/µs with bandwidth of 1.58 GHz, exceeding the original specification. These parts are Active status, RoHS3 compliant, and available in 8-SOIC-EP surface mount packages. Extended operating temperature range (-40°C to 125°C) provides additional margin. MSL 3 rating requires controlled storage conditions (168 hours at 60% RH, 30°C).
The AD8000YCPZ-REEL7 offers comparable performance in a compact 8-LFCSP (3x3) package with 1.35 GHz bandwidth and 4100 V/µs slew rate. This option is suitable for space-constrained applications while maintaining high-speed performance specifications.
For Compact Surface Mount Alternatives (Bandwidth 715-795 MHz):
The AD8001ARTZ-REEL7 and AD8001ARZ-REEL7 provide reduced bandwidth (795 MHz and 715 MHz respectively) in compact SOT-23-5 and 8-SOIC packages. These parts are suitable for applications where the full 1.7 GHz bandwidth of the OPA695IDBVR is not required. Supply current is significantly reduced (5 mA vs. 12.9 mA), offering power efficiency benefits. MSL 1 rating eliminates moisture sensitivity constraints.
For Through-Hole Applications:
The AD8001ANZ and AD8001AQ provide through-hole mounting options (8-PDIP and 8-CERDIP respectively) with 880 MHz bandwidth and 1200 V/µs slew rate. These are suitable for legacy board designs or applications requiring through-hole component compatibility. Operating temperature range matches the original part (-40°C to 85°C).
For Low-Power Applications:
The AD8005ARTZ-REEL7 is selected only when bandwidth requirements are reduced to 270 MHz or lower and power consumption is critical (400 µA supply current). This part is not recommended as a general substitute due to significantly reduced performance specifications.
Compliance Verification:
All substitute parts maintain RoHS3 compliance and EAR99 export classification matching the original OPA695IDBVR. REACH status is unaffected for all identified substitutes. Moisture sensitivity levels vary; MSL 1 parts require no special handling, while MSL 3 parts require controlled storage and assembly conditions per IPC-A-610 standards.
Frequently Asked Questions (FAQ)
Q: Can AD8000YRDZ directly replace OPA695IDBVR in existing PCB layouts?
A: No. The OPA695IDBVR uses SOT-23-6 packaging while AD8000YRDZ uses 8-SOIC-EP packaging. Physical footprints are incompatible. PCB redesign is required. However, electrical performance is compatible for high-speed applications.
Q: What is the key difference between AD8001ARZ and AD8001ARTZ-REEL7?
A: Both parts are electrically identical (1200 V/µs slew rate, 715-795 MHz bandwidth). AD8001ARZ is supplied in Tube packaging, while AD8001ARTZ-REEL7 is supplied in Cut Tape & Digi-Reel format. Selection depends on assembly process requirements and quantity needs.
Q: Is the OPA695IDBVR bandwidth of 1.7 GHz critical for my application?
A: This depends on your signal processing requirements. If your application requires bandwidth above 880 MHz, select AD8000YRDZ or AD8000YCPZ-REEL7. If bandwidth below 880 MHz is acceptable, AD8001 series parts offer lower power consumption and cost benefits.
Q: What does MSL 3 (168 Hours) mean for AD8000YRDZ?
A: MSL 3 indicates the component can absorb moisture for up to 168 hours at 60% relative humidity and 30°C before assembly. After this period, the part must be baked at 125°C for 24 hours before reflow soldering. MSL 1 parts (AD8001 series) have unlimited shelf life without moisture concerns.
Q: Can I use 5962-9459301MPA as a substitute for OPA695IDBVR?
A: Not recommended for high-bandwidth applications. The 5962-9459301MPA provides only 380 MHz bandwidth versus 1.7 GHz for the OPA695IDBVR. It is suitable only for lower-frequency signal processing. Additionally, it requires through-hole mounting, incompatible with surface mount PCB designs.
Q: What is the supply voltage compatibility range for substitutes?
A: The OPA695IDBVR operates from 5V to 12V. AD8000 series parts operate from 4.5V to 12V (wider minimum range). AD8001 and 5962-9459301MPA require 6V minimum. Verify your power supply design meets the minimum voltage requirement of the selected substitute.
Q: Are all substitute parts in Active product status?
A: Yes. All identified substitute parts maintain Active product status with full manufacturer support and availability. No obsolete or end-of-life components are included in this substitution list.
Q: Which substitute offers the best thermal performance?
A: AD8000YRDZ and AD8000YRDZ-REEL7 support extended operating temperature range (-40°C to 125°C) compared to OPA695IDBVR (-40°C to 85°C). This provides additional thermal margin for high-temperature applications. All other substitutes match or fall within the original temperature range.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts