OPA607IDBVR Equivalent & Substitute Parts

Part Overview

The OPA607IDBVR is an active linear operational amplifier manufactured by Texas Instruments, classified as a CMOS amplifier with single-circuit push-pull output configuration. The device is housed in a SOT-23-5 surface mount package and operates across a supply voltage range of 2.2 V to 5.5 V with an operating temperature range of -40°C to 125°C. The OPA607IDBVR maintains Active product status and is currently available in high inventory volume. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate alternative sourcing requirements while maintaining electrical and mechanical compatibility.

Substiute Parts

OPA607IDBVR

Texas InstrumentsIn Stock: 17947OPA607IDBVR Datasheet

Current PartRFQ

OPA607IDBVT

Texas InstrumentsIn Stock: 504526OPA607IDBVT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the OPA607IDBVR are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are established through the following key parameters:

Electrical Equivalence Parameters:

• Amplifier Type: CMOS
• Number of Circuits: 1
• Output Type: Push-Pull
• Slew Rate: 24 V/µs
• Gain Bandwidth Product: 50 MHz
• -3dB Bandwidth: 9 MHz
• Current - Input Bias: 3 pA
• Voltage - Input Offset: 120 µV
• Current - Supply: 900 µA
• Current - Output / Channel: 60 mA
• Voltage - Supply Span: 2.2 V to 5.5 V
• Operating Temperature: -40°C to 125°C

Mechanical Equivalence Parameters:

• Mounting Type: Surface Mount
• Package / Case: SC-74A, SOT-753
• Supplier Device Package: SOT-23-5
• Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts must match all electrical specifications and mechanical packaging requirements to ensure direct functional and physical interchangeability without circuit redesign or board layout modification.

Parameter Comparison

Engineering Selection Recommendations

The OPA607IDBVT is a direct parametric equivalent to the OPA607IDBVR. Both devices are manufactured by Texas Instruments and maintain identical electrical specifications across all measured parameters, including slew rate, gain bandwidth product, input bias current, and supply voltage range. Both parts are classified as Active products and carry identical regulatory compliance designations (REACH Unaffected, EAR99 classification).

The primary distinction between the two parts is the RoHS compliance status: the OPA607IDBVR is listed as Not Applicable for RoHS, while the OPA607IDBVT is ROHS3 Compliant. For applications requiring RoHS3 compliance, the OPA607IDBVT is the appropriate selection. For applications without RoHS compliance requirements, either part is suitable based on electrical and mechanical equivalence.

Both parts are available in identical packaging (SOT-23-5) and mounting configuration (Surface Mount), ensuring direct interchangeability at the board level without layout modification or design revision.

Frequently Asked Questions (FAQ)

Q: Can the OPA607IDBVT be used as a direct replacement for the OPA607IDBVR in existing designs?

A: Yes. The OPA607IDBVT is electrically and mechanically equivalent to the OPA607IDBVR. All electrical parameters, including slew rate, bandwidth, input bias current, and supply voltage specifications, are identical. Both devices use the same SOT-23-5 package and surface mount configuration, enabling direct substitution without circuit redesign or board layout modification.

Q: What is the difference between the OPA607IDBVR and OPA607IDBVT?

A: The devices are identical in electrical performance and mechanical packaging. The OPA607IDBVT carries ROHS3 Compliance certification, while the OPA607IDBVR is listed as Not Applicable for RoHS status. Selection between the two parts depends on whether RoHS3 compliance is required for the application.

Q: Are both parts available in the same packaging format?

A: Yes. Both the OPA607IDBVR and OPA607IDBVT are supplied in SOT-23-5 packaging with SC-74A and SOT-753 case designations. The physical dimensions and pin configurations are identical, ensuring compatibility with existing PCB footprints and assembly processes.

Q: What are the key electrical parameters that define substitution eligibility for this operational amplifier?

A: Substitution eligibility is determined by matching the following parameters: amplifier type (CMOS), number of circuits (1), output type (push-pull), slew rate (24 V/µs), gain bandwidth product (50 MHz), -3dB bandwidth (9 MHz), input bias current (3 pA), input offset voltage (120 µV), supply current (900 µA), output current per channel (60 mA), and supply voltage range (2.2 V to 5.5 V). Operating temperature range (-40°C to 125°C) and moisture sensitivity level (MSL 1) must also match.

Q: Can these parts be used in applications requiring RoHS compliance?

A: The OPA607IDBVT is ROHS3 Compliant and is suitable for applications with RoHS compliance requirements. The OPA607IDBVR is listed as Not Applicable for RoHS status and should not be used in applications requiring RoHS certification.

Q: What is the moisture sensitivity level for both parts?

A: Both the OPA607IDBVR and OPA607IDBVT carry a Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for storage, handling, or assembly processes.