OPA4141AIDR Equivalent & Substitute Parts

Part Overview

The OPA4141AIDR is a J-FET input operational amplifier manufactured by Texas Instruments, configured as a 4-circuit rail-to-rail amplifier in a 14-SOIC surface mount package. This device is classified as Active product status and is ROHS3 compliant. The OPA4141AIDR is utilized in applications requiring low input bias current, high input impedance, and wide supply voltage operation. Substitute parts are identified when inventory constraints, lead time requirements, or specific application parameters necessitate alternative component selection within compatible electrical and mechanical specifications.

Key Parameters

Parameter	OPA4141AIDR
Manufacturer	Texas Instruments
Amplifier Type	J-FET
Number of Circuits	4
Output Type	Rail-to-Rail
Package / Case	14-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Voltage - Supply Span (Min)	4.5 V
Voltage - Supply Span (Max)	36 V
Operating Temperature	-40°C ~ 125°C
Current - Input Bias	2 pA
Slew Rate	20 V/µs
Gain Bandwidth Product	10 MHz
Product Status	Active
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the OPA4141AIDR are identified based on the following critical parameters that determine functional compatibility:

Mechanical Compatibility: All substitute parts maintain the 14-SOIC (0.154", 3.90mm Width) surface mount package, ensuring direct pin-compatible replacement without PCB redesign.

Electrical Compatibility: Substitute parts are grouped by the following allowable parameter ranges:

Number of Circuits: 4 (quad configuration maintained)
Output Type: Rail-to-Rail (output swing capability)
Voltage - Supply Span: Minimum 2.7 V to Maximum 36 V (encompasses OPA4141AIDR supply range of 4.5 V to 36 V)
Mounting Type: Surface Mount

Regulatory Compliance: All substitute parts maintain ROHS3 compliance and REACH Unaffected status, consistent with the main part.

Performance Considerations: Substitute parts may differ in amplifier type (General Purpose vs. J-FET), slew rate, gain bandwidth product, input bias current, and operating temperature range. These differences establish performance boundaries for application-specific selection.

Parameter Comparison

Parameter	OPA4141AIDR	LT1882CS#PBF	LT1885IS#PBF
Manufacturer	Texas Instruments	Analog Devices Inc.	Analog Devices Inc.
Number of Circuits	4	4	4
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Package / Case	14-SOIC (0.154", 3.90mm Width)	14-SOIC (0.154", 3.90mm Width)	14-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Voltage - Supply Span (Min)	4.5 V	2.7 V	2.7 V
Voltage - Supply Span (Max)	36 V	36 V	36 V
Operating Temperature	-40°C ~ 125°C	0°C ~ 70°C	-40°C ~ 85°C
Current - Input Bias	2 pA	150 pA	150 pA
Slew Rate	20 V/µs	0.35 V/µs	1 V/µs
Gain Bandwidth Product	10 MHz	1 MHz	2.2 MHz
Current - Output / Channel	36 mA	40 mA	50 mA
Product Status	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

OPA4141AIDR Primary Selection: The OPA4141AIDR is the primary component for applications requiring J-FET input characteristics with ultra-low input bias current (2 pA), extended operating temperature range (-40°C to 125°C), and high slew rate performance (20 V/µs). This device is Active status with full ROHS3 compliance and is suitable for precision instrumentation and high-impedance signal conditioning applications.

LT1882CS#PBF Substitution: The LT1882CS#PBF is a General Purpose amplifier substitute with compatible 14-SOIC packaging and rail-to-rail output. This part operates within the OPA4141AIDR supply voltage range (2.7 V to 36 V) and maintains ROHS3 compliance. The LT1882CS#PBF is suitable for applications where lower slew rate (0.35 V/µs) and reduced gain bandwidth product (1 MHz) are acceptable. Operating temperature range is limited to 0°C to 70°C. This substitute is appropriate for commercial-grade applications with relaxed temperature requirements.

LT1885IS#PBF Substitution: The LT1885IS#PBF is a General Purpose amplifier substitute with compatible 14-SOIC packaging and rail-to-rail output. This part operates within the OPA4141AIDR supply voltage range (2.7 V to 36 V) and maintains ROHS3 compliance. The LT1885IS#PBF provides intermediate performance with slew rate of 1 V/µs and gain bandwidth product of 2.2 MHz. Operating temperature range extends to -40°C to 85°C, providing broader temperature coverage than the LT1882CS#PBF while remaining below the OPA4141AIDR specification. This substitute is appropriate for industrial-grade applications requiring extended temperature operation.

All substitute parts are Active status products with REACH Unaffected designation, consistent with regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can the LT1882CS#PBF or LT1885IS#PBF be used as direct pin-for-pin replacements for the OPA4141AIDR?

A: Yes. All three parts share the 14-SOIC (0.154", 3.90mm Width) surface mount package with identical pinout configuration. Direct PCB substitution is mechanically and electrically feasible without layout modification.

Q: What are the primary electrical differences between the OPA4141AIDR and the substitute parts?

A: The OPA4141AIDR is a J-FET input amplifier with 2 pA input bias current, 20 V/µs slew rate, and 10 MHz gain bandwidth product. The LT1882CS#PBF and LT1885IS#PBF are General Purpose amplifiers with 150 pA input bias current, lower slew rates (0.35 V/µs and 1 V/µs respectively), and reduced gain bandwidth products (1 MHz and 2.2 MHz respectively). These differences affect performance in high-impedance and high-frequency applications.

Q: Are there operating temperature limitations when substituting the OPA4141AIDR?

A: Yes. The OPA4141AIDR operates from -40°C to 125°C. The LT1882CS#PBF is limited to 0°C to 70°C, and the LT1885IS#PBF operates from -40°C to 85°C. Applications requiring the full -40°C to 125°C range cannot use the LT1882CS#PBF. The LT1885IS#PBF is suitable for applications requiring operation below 0°C but not exceeding 85°C.

Q: Do all parts meet the same regulatory compliance standards?

A: Yes. The OPA4141AIDR, LT1882CS#PBF, and LT1885IS#PBF are all ROHS3 compliant and REACH Unaffected. All parts are classified as Active product status.

Q: What supply voltage range is compatible with all three parts?

A: The OPA4141AIDR requires 4.5 V to 36 V supply. The LT1882CS#PBF and LT1885IS#PBF operate from 2.7 V to 36 V. Applications using supply voltages between 2.7 V and 4.5 V can only use the LT1882CS#PBF or LT1885IS#PBF. Applications requiring 4.5 V minimum supply can use any of the three parts.

Q: How do the output current capabilities compare?

A: The OPA4141AIDR provides 36 mA per channel output current. The LT1882CS#PBF provides 40 mA per channel, and the LT1885IS#PBF provides 50 mA per channel. All three parts exceed 36 mA output capability, making them suitable for applications requiring this performance level.

Q: Which substitute part is recommended for high-frequency applications?

A: The OPA4141AIDR with 10 MHz gain bandwidth product is optimized for higher frequency operation. Between the substitutes, the LT1885IS#PBF with 2.2 MHz gain bandwidth product provides better high-frequency performance than the LT1882CS#PBF with 1 MHz. However, both substitutes have significantly reduced bandwidth compared to the primary part.

Q: What is the input bias current difference, and does it matter?

A: The OPA4141AIDR has 2 pA input bias current, while both substitutes have 150 pA. This 75-fold difference is significant in high-impedance applications (above 1 MΩ) where input bias current can introduce measurement error. Applications with lower source impedances are less sensitive to this parameter difference.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message