Request Quote
(Ships tomorrow)
OPA377AIDBVR Equivalent & Substitute Parts
Part Overview
The OPA377AIDBVR is a general-purpose operational amplifier manufactured by Texas Instruments, housed in a SOT-23-5 surface mount package. This rail-to-rail output amplifier operates across a 2.2 V to 5.5 V supply range and is designed for low-power applications requiring single-circuit amplification. The device is Active status and RoHS3 compliant, making it suitable for modern electronic designs. Substitute parts are identified when equivalent functional performance can be achieved within the specified electrical and mechanical parameters while maintaining package compatibility and compliance standards.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | General Purpose | |
| Number of Circuits | 1 | |
| Output Type | Rail-to-Rail | |
| Package / Case | SC-74A, SOT-753 | |
| Supplier Device Package | SOT-23-5 | |
| Mounting Type | Surface Mount | |
| Voltage - Supply Span (Min) | 2.2 | V |
| Voltage - Supply Span (Max) | 5.5 | V |
| Operating Temperature | -40°C ~ 125°C | |
| Current - Output / Channel | 50 | mA |
| RoHS Status | ROHS3 Compliant |
Substitute Part Grouping Explanation
Substitute parts for the OPA377AIDBVR are qualified based on the following criteria:
Primary Compatibility Parameters:
- Package type: SOT-23-5 (SC-74A, SOT-753)
- Mounting type: Surface Mount
- Amplifier type: General Purpose
- Number of circuits: 1
- Output type: Rail-to-Rail
- Operating temperature range: -40°C ~ 125°C minimum
- Supply voltage span: Minimum 2.2 V to maximum 5.5 V (or compatible range)
Electrical Performance Parameters:
- Slew Rate: 2 V/µs or greater
- Gain Bandwidth Product: 5 MHz or greater
- Current - Input Bias: 0.2 pA or lower (lower is preferred)
- Voltage - Input Offset: 250 µV or lower (lower is preferred)
- Current - Supply: 760 µA or lower (lower is preferred)
- Current - Output / Channel: 50 mA or greater
Compliance Requirements:
- RoHS3 Compliant
- Active product status
- REACH Unaffected
- ECCN: EAR99
Substitutes are grouped by manufacturer and performance tier. Parts meeting all primary compatibility parameters and electrical performance thresholds are considered direct substitutes.
Parameter Comparison
| Part Number | Manufacturer | Slew Rate (V/µs) | GBW (MHz) | Input Bias (pA) | Input Offset (µV) | Supply Current (µA) | Output Current (mA) | Supply Min (V) | Supply Max (V) | Temp Range (°C) | Packaging |
|---|---|---|---|---|---|---|---|---|---|---|---|
| OPA377AIDBVR | Texas Instruments | 2 | 5.5 | 0.2 | 250 | 760 | 50 | 2.2 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| AD8601ARTZ-R2 | Analog Devices Inc. | 6 | 8.4 | 0.2 | 80 | 750 | 50 | 2.7 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| AD8601ARTZ-REEL | Analog Devices Inc. | 6 | 8.4 | 0.2 | 80 | 750 | 50 | 2.7 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| AD8601ARTZ-REEL7 | Analog Devices Inc. | 6 | 8.4 | 0.2 | 80 | 750 | 50 | 2.7 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| AD8601WARTZ-R7 | Analog Devices Inc. | 6 | 8.4 | 200 | 1300 | 750 | 50 | 2.7 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| AD8601WDRTZ-REEL7 | Analog Devices Inc. | 6 | 8.4 | 0.2 | 1300 | 750 | 50 | 2.7 | 5.5 | -40 ~ 125 | CT & Digi-Reel® |
| MAX4321EUK+T | Analog Devices Inc./Maxim Integrated | 2 | 5 | 50 | 1200 | 725 | N/A | 2.4 | 6.5 | -40 ~ 85 | Tape & Reel (TR) |
| MAX4322EUK+T | Analog Devices Inc./Maxim Integrated | 2 | 5 | 50 | 1200 | 725 | N/A | 2.4 | 6.5 | -40 ~ 85 | Tape & Reel (TR) |
| MCP6281RT-E/OT | Microchip Technology | 2.5 | 5 | 1 | 3000 | 450 | 25 | 2.2 | 6 | -40 ~ 125 | Tape & Reel (TR) |
| MCP6281T-E/OT | Microchip Technology | 2.5 | 5 | 1 | 3000 | 450 | 25 | 2.2 | 6 | -40 ~ 125 | CT & Digi-Reel® |
| MCP6481T-E/OT | Microchip Technology | 2.7 | 4 | 1 | 1500 | 240 | 12 | 2.2 | 5.5 | -40 ~ 125 | Tape & Reel (TR) |
Engineering Selection Recommendations
Tier 1 - Direct Substitutes (Preferred):
The AD8601 series (AD8601ARTZ-R2, AD8601ARTZ-REEL, AD8601ARTZ-REEL7) from Analog Devices Inc. are the primary substitutes for OPA377AIDBVR. These parts maintain identical package specifications (SOT-23-5), operating temperature range (-40°C ~ 125°C), output current capability (50 mA), and RoHS3 compliance. The AD8601 variants demonstrate superior electrical performance with higher slew rate (6 V/µs vs. 2 V/µs), increased gain bandwidth product (8.4 MHz vs. 5.5 MHz), and lower input offset voltage (80 µV vs. 250 µV). Supply voltage minimum is 2.7 V, which is compatible with the OPA377AIDBVR's 2.2 V minimum in most applications. All three variants are Active status with unlimited moisture sensitivity rating (MSL 1).
Tier 2 - Compatible Substitutes (Application-Dependent):
The MCP6281T-E/OT and MCP6281RT-E/OT from Microchip Technology are compatible substitutes when lower supply current consumption is prioritized (450 µA vs. 760 µA). These parts maintain the full -40°C ~ 125°C operating range and 2.2 V minimum supply voltage. However, output current per channel is reduced to 25 mA, and input offset voltage is higher at 3 mV. These parts are suitable for power-constrained applications where the reduced output current does not limit circuit functionality.
The MCP6481T-E/OT offers the lowest supply current (240 µA) among substitutes but has reduced output current capability (12 mA) and lower gain bandwidth product (4 MHz). This part is suitable only for applications with minimal output current requirements.
Tier 3 - Limited Compatibility:
The MAX4321EUK+T and MAX4322EUK+T from Maxim Integrated have identical slew rate and gain bandwidth product to the OPA377AIDBVR but operate only to 85°C maximum temperature, limiting use in extended temperature applications. These parts are suitable for commercial temperature range designs only.
The AD8601WARTZ-R7 and AD8601WDRTZ-REEL7 are automotive-grade variants with higher input bias current (200 nA) and input offset voltage (1.3 mV), making them suitable for automotive applications but not ideal for precision analog circuits.
Compliance Verification:
All substitute parts listed are RoHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. All maintain Active product status.
Frequently Asked Questions (FAQ)
Q: Can AD8601ARTZ-R2 replace OPA377AIDBVR in all applications?
A: The AD8601ARTZ-R2 is electrically compatible and maintains package compatibility. However, the minimum supply voltage is 2.7 V versus 2.2 V for the OPA377AIDBVR. Applications requiring operation below 2.7 V must use the original part or verify that the higher minimum voltage does not affect circuit functionality.
Q: What is the difference between AD8601ARTZ-REEL and AD8601ARTZ-REEL7?
A: Both parts are electrically identical. The difference is in packaging format: REEL indicates standard reel packaging, while REEL7 indicates a specific reel configuration. Selection depends on manufacturing equipment compatibility and procurement requirements.
Q: Why does MCP6481T-E/OT have lower output current than OPA377AIDBVR?
A: The MCP6481T-E/OT is optimized for ultra-low power consumption (240 µA supply current) at the expense of output current capability (12 mA vs. 50 mA). This part is suitable only for applications where output current requirements do not exceed 12 mA per channel.
Q: Are MAX4321EUK+T and MAX4322EUK+T interchangeable?
A: Both parts have identical electrical specifications and package format. The difference is in internal circuit configuration. Consult the respective datasheets to confirm functional equivalence for the specific application.
Q: Can automotive-grade AD8601WARTZ-R7 be used in commercial applications?
A: Automotive-grade parts exceed commercial specifications and can be used in commercial applications. However, the higher input bias current (200 nA) and input offset voltage (1.3 mV) may affect precision analog circuit performance compared to the standard AD8601ARTZ variants.
Q: What is the impact of different packaging formats (CT & Digi-Reel® vs. Tape & Reel)?
A: Packaging format affects manufacturing compatibility and handling. CT & Digi-Reel® and Tape & Reel are both standard surface mount formats. Selection depends on manufacturing equipment specifications and procurement logistics. Electrical performance is identical.
Q: Is the OPA377AIDBVR still in production?
A: Yes, the OPA377AIDBVR is Active status with 26,100 pieces in stock. Substitute parts are identified for design flexibility, supply chain redundancy, and performance optimization rather than end-of-life replacement.
Q: What is the minimum supply voltage for reliable operation of AD8601 substitutes?
A: The AD8601 series specifies a minimum supply voltage of 2.7 V. The OPA377AIDBVR operates to 2.2 V. Applications requiring operation between 2.2 V and 2.7 V must use the original OPA377AIDBVR or verify that the higher minimum voltage is acceptable for the circuit design.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts