Request Quote
(Ships tomorrow)
OPA2377AID Equivalent & Substitute Parts
Part Overview
The OPA2377AID is a CMOS dual-channel operational amplifier manufactured by Texas Instruments, housed in an 8-SOIC surface mount package. This device operates as a rail-to-rail output amplifier with low input bias current and is designed for general-purpose signal conditioning applications across industrial and consumer electronics. The part is currently in active production status with 1900 units in stock.
Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining the same package footprint and mounting technology. Alternative sources provide design flexibility, supply chain redundancy, and cost optimization opportunities.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Amplifier Type | CMOS | — |
| Number of Circuits | 2 | — |
| Output Type | Rail-to-Rail | — |
| Slew Rate | 2 | V/µs |
| Gain Bandwidth Product | 5.5 | MHz |
| Current - Input Bias | 0.2 | pA |
| Voltage - Input Offset | 250 | µV |
| Current - Supply (x2 Channels) | 760 | µA |
| Current - Output / Channel | 50 | mA |
| Voltage - Supply Span (Min) | 2.2 | V |
| Voltage - Supply Span (Max) | 5.5 | V |
| Operating Temperature | -40 to 125 | °C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level | 2 (1 Year) | — |
Substitute Part Grouping Explanation
Substitution eligibility for the OPA2377AID is determined by the following critical parameters:
Primary Substitution Criteria:
- Amplifier Type: CMOS technology
- Number of Circuits: Dual-channel (2 circuits)
- Output Type: Rail-to-Rail capability
- Package: 8-SOIC surface mount form factor
- Operating Temperature Range: Minimum -40°C, maximum ≥125°C
- Supply Voltage Span: Minimum ≤2.2V, maximum ≥5.5V
Secondary Performance Parameters:
- Slew Rate: ≥2 V/µs (determines signal fidelity in dynamic applications)
- Gain Bandwidth Product: ≥5.5 MHz (determines frequency response capability)
- Input Bias Current: ≤0.2 pA (determines input impedance characteristics)
- Output Current per Channel: ≥50 mA (determines load driving capability)
Substitute parts are grouped into two categories based on their adherence to these criteria:
Category A - Direct Electrical Equivalents (Analog Devices AD8602 Series): Parts AD8602ARZ, AD8602ARZ-REEL, AD8602ARZ-REEL7, and AD8602WARZ-R7 meet or exceed all primary and secondary parameters. These devices feature improved slew rate (6 V/µs) and gain bandwidth product (8.4 MHz) compared to the OPA2377AID, with identical input bias current and output current specifications. Supply voltage span and operating temperature ranges are compatible. Packaging variants differ only in tape/reel configuration, not electrical performance.
Category B - Functional Alternatives (Rohm Semiconductor and STMicroelectronics): Parts BU7266F-E2, BU7266SF-E2, BU7486F-E2, LMR932F-GE2, and LMV822IDT provide dual-channel rail-to-rail amplification in 8-SOIC packages but exhibit trade-offs in specific performance parameters. These devices are suitable for applications where the OPA2377AID's performance envelope exceeds system requirements.
Parameter Comparison
| Parameter | OPA2377AID | AD8602ARZ | AD8602ARZ-REEL | AD8602ARZ-REEL7 | AD8602WARZ-R7 | LMV822IDT | MAX4326ESA+ |
|---|---|---|---|---|---|---|---|
| Manufacturer | Texas Instruments | Analog Devices | Analog Devices | Analog Devices | Analog Devices | STMicroelectronics | Analog Devices/Maxim |
| Amplifier Type | CMOS | CMOS | CMOS | CMOS | CMOS | General Purpose | General Purpose |
| Number of Circuits | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Output Type | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail | Rail-to-Rail |
| Slew Rate (V/µs) | 2 | 6 | 6 | 6 | 6 | 1.9 | 2 |
| Gain Bandwidth Product (MHz) | 5.5 | 8.4 | 8.4 | 8.4 | 8.4 | 5.5 | 5 |
| Current - Input Bias (pA) | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 60 | 50 |
| Voltage - Input Offset (µV) | 250 | 80 | 80 | 80 | 80 | 3500 | 700 |
| Current - Supply (µA, x2 Channels) | 760 | 750 | 750 | 750 | 750 | 300 | 725 |
| Current - Output / Channel (mA) | 50 | 50 | 50 | 50 | 50 | 70 | 50 |
| Voltage - Supply Span Min (V) | 2.2 | 2.7 | 2.7 | 2.7 | 2.7 | 2.5 | 2.4 |
| Voltage - Supply Span Max (V) | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 6.5 |
| Operating Temperature (°C) | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 125 | -40 to 85 |
| Package / Case | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) | 8-SOIC (0.154", 3.90mm) |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| MSL Rating | 2 (1 Year) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| Inventory (Pcs) | 1900 | 7400 | 8198 | 20100 | 2151 | 17900 | 12700 |
Engineering Selection Recommendations
Recommended Primary Substitutes (Category A - Analog Devices AD8602 Series):
The AD8602ARZ, AD8602ARZ-REEL, AD8602ARZ-REEL7, and AD8602WARZ-R7 are the preferred substitutes for the OPA2377AID. All four variants are manufactured by Analog Devices Inc., carry active product status, and are ROHS3 compliant. These devices provide superior electrical performance with slew rate of 6 V/µs (3× the OPA2377AID) and gain bandwidth product of 8.4 MHz (1.5× the OPA2377AID), while maintaining identical input bias current (0.2 pA) and output current per channel (50 mA).
The primary distinction among AD8602 variants is packaging configuration:
- AD8602ARZ: Tube packaging, 7400 units in stock
- AD8602ARZ-REEL: Tape & Reel format, 8198 units in stock
- AD8602ARZ-REEL7: Cut Tape & Digi-Reel® format, 20100 units in stock (highest availability)
- AD8602WARZ-R7: Cut Tape & Digi-Reel® format, 2151 units in stock
All AD8602 variants feature MSL rating of 1 (Unlimited), providing superior moisture protection compared to the OPA2377AID's MSL rating of 2 (1 Year). Supply voltage span compatibility is confirmed: AD8602 minimum of 2.7 V is within the OPA2377AID's 2.2 V minimum specification, and maximum of 5.5 V matches exactly. Operating temperature range of -40°C to 125°C is identical.
Secondary Substitutes (Category B - Alternative Manufacturers):
The LMV822IDT (STMicroelectronics) and MAX4326ESA+ (Analog Devices/Maxim Integrated) provide functional dual-channel rail-to-rail amplification in 8-SOIC packages with active product status and ROHS3 compliance. These devices are suitable for applications where the OPA2377AID's performance specifications exceed system requirements.
LMV822IDT features automotive-grade qualification (AEC-Q100) and carries the highest inventory availability at 17900 units. However, it exhibits lower slew rate (1.9 V/µs) and higher input bias current (60 nA) compared to the OPA2377AID.
MAX4326ESA+ maintains slew rate parity with the OPA2377AID (2 V/µs) but operates only to 85°C maximum temperature, limiting suitability for extended temperature range applications. It provides extended supply voltage span to 6.5 V maximum.
Compliance and Certification Status:
All recommended substitutes maintain ROHS3 compliance and REACH unaffected status, matching the OPA2377AID's regulatory posture. All parts carry EAR99 ECCN classification and identical HTSUS code (8542.33.0001).
Frequently Asked Questions (FAQ)
Q1: Can the AD8602ARZ series be used as a direct drop-in replacement for the OPA2377AID?
A: Yes, the AD8602ARZ, AD8602ARZ-REEL, AD8602ARZ-REEL7, and AD8602WARZ-R7 are direct electrical equivalents. All four variants share identical electrical specifications and the same 8-SOIC (0.154", 3.90mm Width) package footprint. The only differences are packaging format (tube, tape & reel, or cut tape) and inventory levels. No circuit modifications are required for substitution.
Q2: What is the difference between AD8602ARZ-REEL and AD8602ARZ-REEL7?
A: Both parts are electrically identical CMOS dual-channel rail-to-rail amplifiers with identical electrical performance. The difference is packaging format: AD8602ARZ-REEL uses standard Tape & Reel packaging, while AD8602ARZ-REEL7 uses Cut Tape & Digi-Reel® format. AD8602ARZ-REEL7 has significantly higher inventory availability (20100 units vs. 8198 units), making it the preferred choice for high-volume production.
Q3: Why does the LMV822IDT have lower input bias current (60 nA) than the OPA2377AID (0.2 pA)?
A: The LMV822IDT is classified as a General Purpose amplifier rather than a CMOS amplifier. This architectural difference results in higher input bias current. While this characteristic is acceptable for many applications, it may introduce additional input offset drift in precision signal conditioning circuits. The OPA2377AID's ultra-low input bias current (0.2 pA) is superior for high-impedance source applications.
Q4: Can the MAX4326ESA+ be used in applications requiring operation above 85°C?
A: No. The MAX4326ESA+ is specified for operation only to 85°C maximum temperature, while the OPA2377AID operates to 125°C. For applications requiring extended temperature operation, the AD8602 series or OPA2377AID must be used. The MAX4326ESA+ is suitable only for applications with maximum operating temperature of 85°C or below.
Q5: What is the significance of MSL rating differences between the OPA2377AID and AD8602 variants?
A: MSL (Moisture Sensitivity Level) rating indicates the device's susceptibility to moisture-induced damage during storage and handling. The OPA2377AID carries MSL 2 (1 Year), meaning it must be used within one year of the moisture barrier bag opening. The AD8602 series carries MSL 1 (Unlimited), indicating superior moisture protection with no time-based storage restrictions. For applications with extended component shelf life or storage in humid environments, the AD8602 series provides superior reliability.
Q6: Are all substitute parts ROHS3 compliant?
A: Yes. All recommended substitute parts (AD8602 series, LMV822IDT, and MAX4326ESA+) are ROHS3 compliant, matching the OPA2377AID's regulatory status. All parts are also REACH unaffected and carry EAR99 ECCN classification.
Q7: Which substitute offers the best performance improvement over the OPA2377AID?
A: The AD8602 series provides the most significant performance improvement with 3× higher slew rate (6 V/µs vs. 2 V/µs) and 1.5× higher gain bandwidth product (8.4 MHz vs. 5.5 MHz). These improvements enable faster signal settling and extended frequency response capability. Input bias current remains identical at 0.2 pA, and output current per channel remains at 50 mA.
Q8: What supply voltage range must be verified when substituting parts?
A: The OPA2377AID operates from 2.2 V to 5.5 V. The AD8602 series operates from 2.7 V to 5.5 V. If your circuit operates below 2.7 V, the AD8602 series cannot be used; the OPA2377AID must be retained. For circuits operating at 2.7 V or above, the AD8602 series is compatible. The MAX4326ESA+ extends the upper limit to 6.5 V, suitable for higher voltage applications.
Q9: Is the LMV822IDT suitable for automotive applications?
A: Yes. The LMV822IDT carries automotive-grade qualification (AEC-Q100) and is suitable for automotive applications. The OPA2377AID and AD8602 series do not carry automotive qualification. If automotive-grade certification is required, the LMV822IDT is the appropriate choice.
Q10: How do I select between different AD8602 packaging variants?
A: Selection depends on manufacturing process requirements: AD8602ARZ (tube packaging) is suitable for manual assembly or small-volume production; AD8602ARZ-REEL (tape & reel) is standard for automated pick-and-place assembly; AD8602ARZ-REEL7 (cut tape & Digi-Reel®) offers the same automated assembly compatibility with significantly higher inventory availability (20100 units). For production planning, AD8602ARZ-REEL7 is recommended due to superior availability and identical electrical performance.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts