OP262GS-REEL7 Equivalent & Substitute Parts

Part Overview

The OP262GS-REEL7 is a general-purpose operational amplifier featuring dual circuits in a rail-to-rail output configuration, manufactured by Analog Devices Inc. in an 8-SOIC surface mount package. This component is classified as obsolete, necessitating identification of equivalent alternatives for ongoing design requirements and production continuity. The part delivers 13V/µs slew rate and 15 MHz gain bandwidth product across a 2.7V to 12V supply range, suitable for general-purpose amplification applications requiring low input offset voltage and moderate current consumption.

Substiute Parts

OP262GS-REEL7

Analog Devices Inc.In Stock: 760OP262GS-REEL7 Datasheet

Current PartRFQ

OP262GSZ-REEL7

Analog Devices Inc.In Stock: 2135OP262GSZ-REEL7 Datasheet

DirectRFQ

ALD2732ASAL

Advanced Linear Devices Inc.In Stock: 811ALD2732ASAL Datasheet

SimilarRFQ

ALD2732SAL

Advanced Linear Devices Inc.In Stock: 691ALD2732SAL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the OP262GS-REEL7 is determined by electrical and mechanical compatibility across the following critical parameters: dual-circuit configuration, rail-to-rail output capability, 8-SOIC surface mount package, and operating temperature range. The substitute parts identified fall into two categories based on parameter alignment:

Direct Equivalent (Identical Electrical Performance): OP262GSZ-REEL7 maintains all electrical specifications of the main part, including 13V/µs slew rate, 15 MHz gain bandwidth product, 260 nA input bias current, and 25 µV input offset voltage. This part differs only in product status (active versus obsolete) and packaging format (Cut Tape & Digi-Reel versus reel configuration).

Functional Alternatives (Reduced Performance Specifications): ALD2732SAL and ALD2732ASAL are dual-circuit, rail-to-rail operational amplifiers in 8-SOIC packages. These parts exhibit lower slew rate (1.9V/µs versus 13V/µs), reduced gain bandwidth product (1.5 MHz versus 15 MHz), and narrower supply voltage range (4V to 10V versus 2.7V to 12V). Input bias current is significantly lower (10 pA versus 260 nA), but input offset voltage is higher (600 µV to 2 mV versus 25 µV). Operating temperature range is restricted to 0°C to 70°C.

Parameter Comparison

Engineering Selection Recommendations

OP262GSZ-REEL7 is the primary substitute for OP262GS-REEL7. This part is manufactured by Analog Devices Inc. and maintains identical electrical specifications across all measured parameters. The part is currently in active production status, ensuring long-term availability and supply chain continuity. OP262GSZ-REEL7 carries ROHS3 compliance and REACH unaffected status, meeting modern environmental and regulatory requirements. The only distinction is packaging format; OP262GSZ-REEL7 is supplied in Cut Tape and Digi-Reel format rather than standard reel configuration. This part is suitable for direct replacement in all applications where OP262GS-REEL7 was originally specified.

ALD2732SAL and ALD2732ASAL are functional alternatives manufactured by Advanced Linear Devices Inc. These parts are appropriate only for applications where reduced slew rate (1.9V/µs), lower gain bandwidth product (1.5 MHz), and higher input offset voltage are acceptable. The narrower supply voltage range (4V to 10V) and restricted operating temperature (0°C to 70°C) limit applicability to designs not requiring extended temperature operation or low-voltage supply capability. Both parts carry ROHS3 compliance and REACH unaffected status. ALD2732ASAL exhibits superior input offset voltage specification (600 µV) compared to ALD2732SAL (2 mV), making it preferable when offset voltage performance is a secondary consideration.

Frequently Asked Questions (FAQ)

Q: Can OP262GSZ-REEL7 be used as a direct replacement for OP262GS-REEL7?

A: Yes. OP262GSZ-REEL7 is electrically and mechanically identical to OP262GS-REEL7. All electrical parameters, including slew rate, gain bandwidth product, input bias current, input offset voltage, supply voltage range, and operating temperature, are equivalent. The parts differ only in packaging format and product status. OP262GSZ-REEL7 is in active production.

Q: What are the limitations of ALD2732SAL and ALD2732ASAL as substitutes?

A: ALD2732SAL and ALD2732ASAL exhibit significantly reduced performance in slew rate (1.9V/µs versus 13V/µs) and gain bandwidth product (1.5 MHz versus 15 MHz). Supply voltage range is narrower (4V to 10V versus 2.7V to 12V), and operating temperature is restricted to 0°C to 70°C. Input offset voltage is substantially higher (600 µV to 2 mV versus 25 µV). These parts are suitable only for applications where these reduced specifications are acceptable.

Q: Are all substitute parts available in the same 8-SOIC package?

A: Yes. OP262GS-REEL7, OP262GSZ-REEL7, ALD2732SAL, and ALD2732ASAL are all housed in 8-SOIC packages with identical physical dimensions (0.154" width, 3.90mm). All parts are surface mount components. Mechanical compatibility is confirmed across all substitute options.

Q: What is the difference between OP262GS-REEL7 and OP262GSZ-REEL7 packaging?

A: OP262GS-REEL7 is supplied on standard reel configuration. OP262GSZ-REEL7 is supplied in Cut Tape and Digi-Reel format. Both packaging formats contain identical components with identical electrical specifications. Selection between these formats depends on procurement and assembly process requirements.

Q: Do the substitute parts meet current environmental compliance standards?

A: OP262GSZ-REEL7, ALD2732SAL, and ALD2732ASAL all carry ROHS3 compliance and REACH unaffected status. These certifications confirm compliance with current environmental and regulatory requirements for electronic components. OP262GS-REEL7 compliance status is not specified in available documentation.

Q: Which substitute part should be selected for new designs?

A: OP262GSZ-REEL7 is the recommended selection for new designs requiring equivalent performance to OP262GS-REEL7. This part maintains all electrical specifications, is in active production status, and carries current environmental compliance certifications. ALD2732SAL and ALD2732ASAL are appropriate only when reduced performance specifications align with application requirements.