OP200EZ Equivalent & Substitute Parts

Part Overview

The OP200EZ is a general-purpose operational amplifier manufactured by Analog Devices Inc., configured as a dual-channel integrated circuit in an 8-CERDIP package. This device is classified as Active product status and is designed for linear amplification applications requiring low input offset voltage and low input bias current characteristics. The OP200EZ operates across a wide supply voltage range of 6V to 36V and maintains performance across the industrial temperature range of -40°C to 85°C. Substitute parts are identified when equivalent functional performance can be achieved within the specified electrical and mechanical parameters, accounting for differences in packaging, supply voltage ranges, and operating temperature specifications.

Substiute Parts

OP200EZ

Analog Devices Inc.In Stock: 2267OP200EZ Datasheet

Current PartRFQ

LT1013CP

Texas InstrumentsIn Stock: 5541LT1013CP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the OP200EZ with the LT1013CP is determined by functional equivalence within the dual-channel general-purpose operational amplifier category. Both devices share the following critical parameters that establish substitution eligibility:

• Amplifier Type: Both are general-purpose operational amplifiers
• Number of Circuits: Both contain 2 independent amplifier circuits
• Mounting Type: Both are through-hole mounted devices
• Package Footprint: Both utilize 8-pin DIP packages with 0.300" (7.62mm) spacing, ensuring mechanical compatibility on printed circuit boards
• Regulatory Compliance: Both are ROHS3 compliant and REACH unaffected
• Product Status: Both are active products with current manufacturing support

The LT1013CP operates within a narrower supply voltage range (5V to 30V) compared to the OP200EZ (6V to 36V) and has a restricted operating temperature range (0°C to 70°C versus -40°C to 85°C). These differences establish application-specific constraints for substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

The LT1013CP is a functional substitute for the OP200EZ in applications where the following conditions are satisfied:

1. Supply Voltage Compatibility: The application supply voltage must fall within the LT1013CP operating range of 5V to 30V. Applications requiring the extended upper supply voltage of the OP200EZ (up to 36V) cannot use the LT1013CP as a direct substitute.

2. Operating Temperature Range: The application must operate within the LT1013CP temperature range of 0°C to 70°C. Applications requiring the extended lower temperature operation of the OP200EZ (-40°C) cannot use the LT1013CP as a direct substitute.

3. Performance Characteristics: The LT1013CP exhibits superior performance in slew rate (0.4V/µs versus 0.15V/µs), gain bandwidth product (1MHz versus 500kHz), and input bias current (15pA versus 100pA). These characteristics make the LT1013CP suitable for applications where faster response and lower input current are beneficial.

4. Regulatory and Compliance Status: Both devices maintain ROHS3 compliance and REACH unaffected status, ensuring equivalent environmental and regulatory standing.

5. Package Compatibility: Both devices utilize through-hole 8-pin DIP packages with identical 0.300" (7.62mm) spacing, enabling direct mechanical substitution on existing printed circuit board layouts.

Frequently Asked Questions (FAQ)

Q: Can the LT1013CP replace the OP200EZ in all applications?

A: No. The LT1013CP operates within a narrower supply voltage range (5V to 30V) and restricted temperature range (0°C to 70°C). Substitution is valid only when the application operates within these constraints.

Q: What are the key electrical differences between these devices?

A: The LT1013CP provides higher slew rate (0.4V/µs versus 0.15V/µs), higher gain bandwidth product (1MHz versus 500kHz), lower input bias current (15pA versus 100pA), and lower supply current (350µA versus 570µA per dual channels). The OP200EZ provides lower input offset voltage (25µV versus 60µV).

Q: Are the packages mechanically compatible?

A: Yes. Both devices use 8-pin DIP packages with 0.300" (7.62mm) spacing. The OP200EZ uses 8-CERDIP packaging while the LT1013CP uses 8-PDIP packaging. Both are through-hole mounted and have identical pin spacing, enabling direct board-level substitution.

Q: What supply voltage range does each device support?

A: The OP200EZ supports 6V to 36V. The LT1013CP supports 5V to 30V. Applications requiring supply voltages above 30V or below 6V must use the OP200EZ.

Q: What are the operating temperature ranges?

A: The OP200EZ operates from -40°C to 85°C. The LT1013CP operates from 0°C to 70°C. Applications requiring operation below 0°C or above 70°C must use the OP200EZ.

Q: Are both devices RoHS compliant?

A: Yes. Both the OP200EZ and LT1013CP are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which device has lower power consumption?

A: The LT1013CP has lower supply current at 350µA (x2 channels) compared to the OP200EZ at 570µA (x2 channels), making it suitable for power-sensitive applications within its operating constraints.