OP196GSZ-REEL Equivalent & Substitute Parts

Part Overview

The OP196GSZ-REEL is a general-purpose operational amplifier manufactured by Analog Devices Inc., designed for rail-to-rail applications in 8-SOIC surface mount packaging. This single-circuit amplifier operates across a 3V to 12V supply range and maintains active product status with full RoHS3 compliance. Substitute parts are identified when equivalent functional performance is required within the same package footprint and electrical operating parameters, or when supply constraints necessitate alternative sourcing from qualified manufacturers.

Substiute Parts

OP196GSZ-REEL

Analog Devices Inc.In Stock: 2100OP196GSZ-REEL Datasheet

Current PartRFQ

LMP7707MA/NOPB

Texas InstrumentsIn Stock: 1681LMP7707MA/NOPB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the OP196GSZ-REEL is determined by the following criteria:

Package Compatibility: All substitute parts must use the 8-SOIC (0.154", 3.90mm Width) surface mount package to ensure direct PCB footprint compatibility without layout modifications.

Functional Classification: Substitute parts must be classified as general-purpose operational amplifiers with single-circuit configuration and rail-to-rail output capability.

Supply Voltage Range: Substitute parts must operate within or encompass the 3V to 12V supply span of the primary part. Parts with wider supply ranges are acceptable; parts with narrower ranges are not.

Operating Temperature Range: Substitute parts must support the -40°C to 125°C operating temperature range.

Regulatory Compliance: Substitute parts must maintain RoHS3 compliance and REACH unaffected status to satisfy procurement and environmental requirements.

The LMP7707MA/NOPB from Texas Instruments meets all substitution criteria and is listed as a qualified equivalent.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection: The OP196GSZ-REEL remains the preferred choice when supply availability is adequate and the specified electrical performance parameters are sufficient for the application. This part is active, fully compliant with RoHS3 and REACH requirements, and available in quantity.

Substitute Part Selection: The LMP7707MA/NOPB is a qualified substitute when OP196GSZ-REEL supply is constrained or when enhanced performance characteristics are beneficial to the application. Both parts share identical package geometry, mounting type, operating temperature range, and regulatory compliance status. The LMP7707MA/NOPB exhibits superior slew rate (5.9V/µs versus 0.3V/µs), higher gain bandwidth product (15MHz versus 450kHz), lower input bias current (0.2pA versus 10nA), and higher output current capability (86mA versus 4mA). The LMP7707MA/NOPB operates at a lower minimum supply voltage (2.7V versus 3V) and draws higher supply current (790µA versus 60µA).

Compliance Verification: Both parts maintain active product status and full compliance with RoHS3, REACH, and MSL requirements. No additional qualification is required from a regulatory standpoint.

Frequently Asked Questions (FAQ)

Q: Can the LMP7707MA/NOPB be used as a direct replacement for the OP196GSZ-REEL without PCB modifications?

A: Yes. Both parts use identical 8-SOIC (0.154", 3.90mm Width) surface mount packaging with the same pinout configuration. No PCB layout changes are required for mechanical or electrical connectivity.

Q: What are the primary performance differences between these two parts?

A: The LMP7707MA/NOPB provides significantly higher slew rate (5.9V/µs versus 0.3V/µs), higher gain bandwidth product (15MHz versus 450kHz), and greater output current capability (86mA versus 4mA). The OP196GSZ-REEL draws lower supply current (60µA versus 790µA). Input offset voltage specifications are comparable (35µV versus 37µV).

Q: Are there supply voltage compatibility concerns when substituting?

A: The LMP7707MA/NOPB operates at a lower minimum supply voltage (2.7V) compared to the OP196GSZ-REEL (3V minimum). Both parts support the 12V maximum supply voltage. Applications designed for the OP196GSZ-REEL within the 3V to 12V range are fully compatible with the LMP7707MA/NOPB.

Q: Do both parts meet the same environmental and regulatory standards?

A: Yes. Both the OP196GSZ-REEL and LMP7707MA/NOPB are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity ratings. Both support the -40°C to 125°C operating temperature range.

Q: Which part should be selected for low-power applications?

A: The OP196GSZ-REEL is the appropriate choice for power-constrained designs, as it draws 60µA supply current compared to 790µA for the LMP7707MA/NOPB.

Q: Which part should be selected for high-speed signal processing?

A: The LMP7707MA/NOPB is suitable for applications requiring higher slew rate and gain bandwidth product. The 15MHz gain bandwidth product and 5.9V/µs slew rate support faster signal conditioning compared to the OP196GSZ-REEL specifications.