Equivalent & Substitute Parts for OP-07DP (Texas Instruments) – Linear Amplifiers

Part Overview

The Texas Instruments OP-07DP is a general purpose linear amplifier IC featuring a single operational amplifier circuit in an 8-DIP (0.300", 7.62mm) through-hole package. Typical applications require strict control of electrical parameters such as slew rate, input bias current, and gain bandwidth. Given its product status as "Last Time Buy," engineers must identify alternative models to ensure uninterrupted sourcing and lifecycle support, using only qualified equivalents within defined specifications.

Substiute Parts

OP-07DP

Texas InstrumentsIn Stock: 2480OP-07DP Datasheet

Current PartRFQ

OP07CDR

Texas InstrumentsIn Stock: 220166OP07CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are strictly grouped according to the following matching parameters: amplifier type (general purpose), number of circuits (1), slew rate (0.3V/µs), gain bandwidth product (600 kHz), voltage supply span (6 V to 36 V), and operating temperature range (0°C ~ 70°C). Package type and mounting method must also be considered for compatibility. Only the listed electrical and mechanical parameters are used to determine substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

OP-07DP is designated as "Last Time Buy" while OP07CDR maintains "Active" status. Both parts are ROHS3 compliant and unaffected by REACH, supporting standardized global procurement. OP07CDR is packaged in a surface mount format (8-SOIC), representing a valid substitute only where the mounting and case style meet application requirements established for the OP-07DP. Engineering selection should reference compliance, inventory availability, and certifications as provided.

Frequently Asked Questions (FAQ)

Q: What criteria are used to determine if OP07CDR is a substitute for OP-07DP?
A: The substitute is selected based strictly on matching amplifier type, number of circuits, slew rate, gain bandwidth product, voltage supply requirements, operating temperature, and environmental compliance.

Q: Are there differences in packaging or mounting between OP-07DP and OP07CDR?
A: Yes. OP-07DP uses an 8-DIP through-hole package, while OP07CDR is supplied in an 8-SOIC surface mount package. The mechanical mounting method must match system design requirements.

Q: Is the electrical performance equivalent between the OP-07DP and OP07CDR?
A: Key parameters such as amplifier type, number of circuits, slew rate, gain bandwidth, and voltage supply span are equivalent. Input bias current and offset voltage values differ as provided.

Q: What compliance standards do both OP-07DP and OP07CDR meet?
A: Both parts are ROHS3 compliant and unaffected by REACH, with ECCN classification EAR99 and HTSUS code 8542.33.0001.

Q: Can OP07CDR be used in all OP-07DP applications?
A: Substitution is valid where surface mount packaging (8-SOIC) and related mechanical constraints are acceptable for the system design. All electrical substitution parameters align as listed.