OP07CS8#TRPBF Equivalent & Substitute Parts

Part Overview

The OP07CS8#TRPBF is a general-purpose operational amplifier manufactured by Analog Devices Inc., housed in an 8-SOIC surface mount package. This linear amplifier integrated circuit is designed for applications requiring low input offset voltage and low input bias current characteristics. The part is currently in active production status with 1020 units available in new original inventory. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required, or when alternative packaging formats better suit manufacturing or procurement requirements.

Substiute Parts

OP07CS8#TRPBF

Analog Devices Inc.In Stock: 1116OP07CS8#TRPBF Datasheet

Current PartRFQ

OP07DRZ

Analog Devices Inc.In Stock: 19988OP07DRZ Datasheet

SimilarRFQ

OP07DRZ-REEL

Analog Devices Inc.In Stock: 17470OP07DRZ-REEL Datasheet

SimilarRFQ

OP07DRZ-REEL7

Analog Devices Inc.In Stock: 35148OP07DRZ-REEL7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the OP07CS8#TRPBF are identified based on the following criteria:

Electrical Compatibility: All substitute parts share the same base product number (OP07), identical gain bandwidth product (600 kHz), and equivalent 8-SOIC package footprint. The substitute parts maintain the same physical mounting interface and pin configuration.

Packaging Format Variations: The substitute parts differ primarily in packaging delivery format (Tube, Tape & Reel, or Cut Tape & Digi-Reel) rather than electrical performance. These variations accommodate different manufacturing assembly processes and procurement workflows.

Key Parameters for Substitution:

• Base Product Number: OP07
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Gain Bandwidth Product: 600 kHz
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed (OP07DRZ, OP07DRZ-REEL, OP07DRZ-REEL7) are manufactured by Analog Devices Inc. and maintain active production status. Each part is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Selection Basis:

The OP07CS8#TRPBF and its substitutes are electrically equivalent within the 8-SOIC package form factor. Selection between these parts is determined by packaging delivery requirements:

• OP07CS8#TRPBF (Tape & Reel): Suitable for high-volume automated assembly processes requiring continuous reel feeding.
• OP07DRZ (Tube): Appropriate for lower-volume applications or manual assembly workflows.
• OP07DRZ-REEL (Tape & Reel): Functionally identical to OP07CS8#TRPBF with alternative supplier device package designation.
• OP07DRZ-REEL7 (Cut Tape & Digi-Reel): Provides flexibility for mixed-volume production or component kit assembly.

All parts share identical mechanical compatibility with 8-SOIC surface mount assembly equipment and PCB footprints. The operating temperature range differs between the main part (0 to 70°C) and substitute parts (-40 to 125°C), with substitutes offering extended temperature capability. The minimum supply voltage specification differs (6 V for OP07CS8#TRPBF versus 8 V for substitutes).

Frequently Asked Questions (FAQ)

Q: Can OP07DRZ be used as a direct replacement for OP07CS8#TRPBF in PCB assembly?

A: Yes. Both parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pin configuration and footprint. The primary difference is packaging format (Tube versus Tape & Reel). Assembly equipment compatibility depends on the specific manufacturing process; tube packaging requires different handling than reel-fed components.

Q: What is the difference between OP07DRZ-REEL and OP07DRZ-REEL7?

A: Both parts are electrically identical and use the same 8-SOIC package. The difference lies in packaging delivery format: OP07DRZ-REEL uses standard Tape & Reel format, while OP07DRZ-REEL7 uses Cut Tape & Digi-Reel format. Selection depends on assembly line requirements and component handling preferences.

Q: Are there electrical performance differences between OP07CS8#TRPBF and OP07DRZ?

A: The parts share identical gain bandwidth product (600 kHz) and equivalent general-purpose amplifier characteristics. Minor differences exist in specified slew rate (0.25 V/µs versus 0.2 V/µs), input bias current (1.8 nA versus 200 pA), and input offset voltage (60 µV versus 45 µV). The operating temperature range differs (0 to 70°C versus -40 to 125°C), and minimum supply voltage specification differs (6 V versus 8 V).

Q: Which substitute part should be selected for extended temperature operation?

A: All substitute parts (OP07DRZ, OP07DRZ-REEL, OP07DRZ-REEL7) support the extended operating temperature range of -40 to 125°C, compared to the OP07CS8#TRPBF range of 0 to 70°C. Selection among substitutes is based on packaging format requirements rather than temperature capability.

Q: Is the OP07CS8#TRPBF compatible with the same PCB footprint as substitute parts?

A: Yes. All parts use the 8-SOIC (0.154", 3.90mm Width) package with identical pin spacing and mechanical dimensions. PCB footprints and assembly processes are directly compatible across all listed parts.

Q: What compliance certifications apply to all substitute parts?

A: All parts are ROHS3 compliant, REACH unaffected, and carry MSL rating of 1 (Unlimited). These certifications are consistent across OP07CS8#TRPBF and all substitute parts.