OKX-T/10-W5P-C Equivalent & Substitute Parts Reference

Part Overview

The Murata Power Solutions OKX-T/10-W5P-C is a DC-DC converter non-isolated PoL (Point-of-Load) module specified for single output applications requiring a regulated voltage from 0.75V to 3.63V at up to 10A, and input voltage from 2.4V to 5.5V. It features remote on/off, over current protection (OCP), over temperature protection (OTP), short circuit protection (SCP), and under voltage lockout (UVLO). The device is through hole mount with an 11-SIP module package. The OKX-T/10-W5P-C is currently obsolete, necessitating strict identification of substitute models for ongoing designs and legacy maintenance.

Substiute Parts

OKX-T/10-W5P-C

Murata Power Solutions Inc.In Stock: 981OKX-T/10-W5P-C Datasheet

Current PartRFQ

YNV05T10-0G

Bel Power SolutionsIn Stock: 896YNV05T10-0G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for DC-DC converter modules in the non-isolated PoL category are identified based strictly on the following provided parameters: input voltage range, output voltage range, maximum output current, maximum output power, package type and mounting, application specification, operating temperature, features, efficiency, compliance (RoHS, REACH), and certifications. The substitute listed below meets the required parameters for functionality, electrical compatibility, mechanical fit, and certification.

Parameter Comparison

Engineering Selection Recommendations

OKX-T/10-W5P-C is obsolete. YNV05T10-0G from Bel Power Solutions is active, RoHS compliant (ROHS3), REACH unaffected, MSL 1 (Unlimited), and carries matching commercial and regulatory certifications. All substitute selection is strictly based on the product’s status and compliance documentation as provided.

Frequently Asked Questions (FAQ)

Q: What are the mandatory parameters to consider for substituting OKX-T/10-W5P-C?
A: Selection must match the following input parameters: type (non-isolated PoL module DC-DC converter), input voltage range, output voltage range, maximum output current, maximum power, mounting type and package, control features, operating temperature, efficiency, compliance (RoHS, REACH), and certifications.

Q: Is the mechanical package and mounting fully compatible?
A: The substitute YNV05T10-0G uses a 10-SIP module (2.00" L x 0.28" W x 0.54" H) compared to the original 11-SIP module (2.00" L x 0.37" W x 0.50" H). The dimensions and pin configuration must be reviewed for mechanical fit in the final application.

Q: What compliance certifications are relevant for substitute selection?
A: Substitute selection must strictly follow RoHS Status, Moisture Sensitivity Level (MSL), REACH Status, ECCN, and HTSUS as provided for regulatory alignment.

Q: Is output performance directly substitutable?
A: The substitute matches output voltage, current, and efficiency parameters according to provided specifications.

Q: Can features such as remote on/off and fault protections be matched?
A: The substitute YNV05T10-0G includes remote on/off, OCP, OTP, and UVLO features as specified. SCP feature presence should be confirmed if critical.

Q: Is the substitute active and in production?
A: The YNV05T10-0G substitute is listed as active.