OJE-SS-112DM,000 Equivalent & Substitute Parts

Part Overview

The OJE-SS-112DM,000 is a general purpose relay manufactured by TE Connectivity Potter & Brumfield Relays. This through-hole mounted device features a single pole single throw normally open (SPST-NO) contact configuration with a 12VDC coil and 5A contact rating. The relay is designed for general purpose switching applications requiring sealed, flux-protected construction.

This part is currently active in production with 859 pieces available in new original inventory. Substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part number becomes unavailable or when alternative sourcing is required.

Substiute Parts

OJE-SS-112DM,000

TE Connectivity Potter & Brumfield RelaysIn Stock: 874OJE-SS-112DM,000 Datasheet

Current PartRFQ

OJ-SS-112DM,000

TE Connectivity Potter & Brumfield RelaysIn Stock: 1482OJ-SS-112DM,000 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the OJE-SS-112DM,000 are identified based on electrical and mechanical parameter equivalence. The substitution logic is based on the following critical parameters that must remain identical:

Electrical Parameters:

• Coil voltage: 12VDC
• Contact form: SPST-NO (1 Form A)
• Contact rating: 5 A
• Switching voltage: 277VAC, 30VDC - Max
• Coil current: 37.5 mA
• Coil resistance: 320 Ohms
• Must operate voltage: 8.4 VDC
• Must release voltage: 0.6 VDC
• Operate time: 10 ms
• Release time: 4 ms

Mechanical Parameters:

• Mounting type: Through Hole
• Termination style: PC Pin
• Contact material: Silver (Ag)
• Seal rating: Sealed - Flux Protection

Environmental Parameters:

• Operating temperature range: -30°C ~ 85°C
• Coil type: Non Latching

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes for the OJE-SS-112DM,000.

Parameter Comparison

Engineering Selection Recommendations

Both the OJE-SS-112DM,000 and OJ-SS-112DM,000 are active production parts from TE Connectivity Potter & Brumfield Relays with identical electrical and mechanical specifications. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL Level 1 (unlimited moisture sensitivity rating).

The OJ-SS-112DM,000 is a direct parametric equivalent with all critical operating parameters matching the OJE-SS-112DM,000. Selection between these parts may be based on inventory availability, as the OJ-SS-112DM,000 currently has higher stock levels (1404 pieces versus 859 pieces).

Both parts are suitable for applications requiring general purpose switching with 12VDC coil excitation, 5A contact capacity, and sealed flux-protected construction across the -30°C to 85°C operating temperature range.

Frequently Asked Questions (FAQ)

Q: What makes OJ-SS-112DM,000 a suitable substitute for OJE-SS-112DM,000?

A: The OJ-SS-112DM,000 meets all electrical and mechanical parameter requirements of the OJE-SS-112DM,000. Both parts feature identical coil voltage (12VDC), contact form (SPST-NO), current rating (5A), coil resistance (320 Ohms), timing characteristics, and operating temperature range. Both are through-hole mounted with PC pin termination and sealed flux-protected construction.

Q: Are there any differences in compliance or certification between these parts?

A: No. Both the OJE-SS-112DM,000 and OJ-SS-112DM,000 carry identical compliance certifications: ROHS3 compliant, REACH unaffected, and MSL Level 1 (unlimited). Both are active production parts from the same manufacturer.

Q: Can these relays be used interchangeably in circuit designs?

A: Yes. The OJ-SS-112DM,000 is a direct parametric equivalent and can be used as a substitute in any application designed for the OJE-SS-112DM,000. All electrical characteristics, mechanical dimensions (through-hole mounting with PC pins), and environmental ratings are identical.

Q: What is the difference between the OJE and OJ series designations?

A: The OJE-SS-112DM,000 belongs to the OJE series, while the OJ-SS-112DM,000 belongs to the OJ series. Both are part of the same product family from TE Connectivity Potter & Brumfield Relays. The series designation reflects internal product line organization but does not affect electrical or mechanical compatibility for applications requiring the specified parameters.

Q: Should inventory levels influence the selection between these substitute parts?

A: Inventory availability may be a practical consideration for procurement. The OJ-SS-112DM,000 currently has 1404 pieces in stock compared to 859 pieces for the OJE-SS-112DM,000. However, both parts are active production items and suitable for long-term supply planning.

Q: Are there any thermal or environmental limitations when substituting these parts?

A: No. Both parts operate across the identical temperature range of -30°C to 85°C and carry the same sealed flux-protected seal rating. Environmental performance is equivalent between the two part numbers.