ODJMDLLTNF-200.000000 Equivalent & Substitute Parts

Part Overview

The ODJMDLLTNF-200.000000 is a 200 MHz XO (Standard) LVPECL Oscillator manufactured by Taitien, designed for applications requiring precision frequency generation at 2.5V supply voltage with Enable/Disable functionality. This component is currently Active in product status with 931 units in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and package requirements for direct circuit board replacement.

Substiute Parts

ODJMDLLTNF-200.000000

TaitienIn Stock: 945ODJMDLLTNF-200.000000 Datasheet

Current PartRFQ

AX7PBF1-200.0000C

Abracon LLCIn Stock: 1132AX7PBF1-200.0000C Datasheet

DirectRFQ

AX7PBF3-200.0000C

Abracon LLCIn Stock: 739AX7PBF3-200.0000C Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ODJMDLLTNF-200.000000 are qualified based on the following critical parameters:

• Frequency: 200 MHz (exact match required)
• Output Standard: LVPECL (exact match required)
• Supply Voltage: 2.5V (exact match required)
• Package: 8-SMD, No Lead (exact match required)
• Physical Dimensions: 7.00mm x 5.00mm (exact match required)
• Operating Temperature: -40°C ~ 85°C (exact match required)
• Frequency Stability: ±25ppm (exact match required)
• Function: Enable/Disable (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

The identified substitute parts from Abracon LLC meet all critical electrical and mechanical parameters, ensuring functional and physical compatibility for direct replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

The ODJMDLLTNF-200.000000 (Taitien) is the primary component with Active product status and current availability of 931 units in stock. Both Abracon LLC substitute parts (AX7PBF1-200.0000C and AX7PBF3-200.0000C) are functionally equivalent and meet all critical electrical and mechanical specifications for direct replacement.

The Abracon substitutes are marked as Discontinued at DiGi Electronics, indicating limited future availability through standard distribution channels. Both substitute parts maintain ROHS3 compliance and identical moisture sensitivity ratings. The maximum seated height of substitute parts (1.90mm) is marginally higher than the primary part (1.85mm), remaining within typical PCB assembly tolerances for 8-SMD packages.

Current consumption characteristics show minor variations: the primary part draws 95mA maximum supply current, while substitutes draw 94mA. In disable mode, substitutes consume 86mA compared to the primary part's 95mA specification.

Frequently Asked Questions (FAQ)

Q: Can AX7PBF1-200.0000C and AX7PBF3-200.0000C be used interchangeably with ODJMDLLTNF-200.000000?

A: Yes. Both Abracon parts meet all critical electrical parameters (frequency, output type, supply voltage, stability, temperature range, and function) and share identical package specifications (8-SMD, No Lead, 7.00mm x 5.00mm). The 0.05mm height difference (1.90mm vs 1.85mm) is within standard PCB assembly tolerances.

Q: What are the key differences between the substitute parts?

A: AX7PBF1-200.0000C and AX7PBF3-200.0000C are both from Abracon's ClearClock™ AX7 series and share identical electrical and mechanical specifications. Both are discontinued at DiGi Electronics.

Q: Are there any compliance or certification differences?

A: All three parts (primary and substitutes) are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Both Abracon parts carry REACH Unaffected status. ECCN and HTSUS classifications are identical across all parts.

Q: What should be considered regarding product availability?

A: The primary ODJMDLLTNF-200.000000 is Active with 931 units in stock. The Abracon substitutes are discontinued at DiGi Electronics, with 1080 and 701 units respectively available through current inventory channels. For long-term supply chain planning, the primary part is the recommended selection.

Q: Are there any power consumption considerations for substitution?

A: The primary part specifies 95mA maximum supply current in both normal and disable modes. Abracon substitutes specify 94mA in normal mode and 86mA in disable mode. These variations are within typical design margins for LVPECL oscillator applications.