ODEMDLVTNF-125.000000 Equivalent & Substitute Parts

Part Overview

The ODEMDLVTNF-125.000000 is a 125 MHz XO (Standard) LVDS Oscillator manufactured by Taitien, designed for applications requiring low-voltage differential signaling output at 3.3V supply voltage with enable/disable functionality. This surface-mount oscillator is packaged in an 8-SMD, No Lead configuration with a compact footprint of 7.00mm x 5.00mm. The part is currently Active in product status with 970 pieces available in new original inventory. Substitute parts are necessary when primary inventory is unavailable, when discontinued alternatives require functional equivalents, or when design flexibility permits selection from qualified alternatives meeting identical electrical and mechanical specifications.

Substiute Parts

ODEMDLVTNF-125.000000

TaitienIn Stock: 990ODEMDLVTNF-125.000000 Datasheet

Current PartRFQ

AX7DAF1-125.0000C

Abracon LLCIn Stock: 662AX7DAF1-125.0000C Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The AX7DAF1-125.0000C by Abracon LLC qualifies as a direct substitute for the ODEMDLVTNF-125.000000 based on the following critical parameters:

• Frequency Match: Both parts operate at 125 MHz
• Output Configuration: Both provide LVDS output
• Supply Voltage: Both require 3.3V supply
• Functional Capability: Both include enable/disable functionality
• Frequency Stability: Both maintain ±25ppm stability
• Operating Temperature: Both operate across -40°C ~ 85°C
• Package Compatibility: Both use 8-SMD, No Lead packaging
• Footprint Alignment: Both share identical 7.00mm x 5.00mm dimensions
• Compliance: Both are ROHS3 compliant with MSL 1 rating

Substitution is valid when these parameters are required by the application design. No additional electrical or mechanical parameters beyond those listed determine substitutability for this oscillator category.

Parameter Comparison

Engineering Selection Recommendations

ODEMDLVTNF-125.000000 (Taitien) is the primary selection when active inventory and continuous product support are required. This part maintains Active product status with 970 pieces in new original stock, ensuring supply chain reliability and manufacturer support continuity.

AX7DAF1-125.0000C (Abracon LLC) serves as a functional equivalent when the primary part is unavailable. This substitute is electrically and mechanically compatible across all critical parameters. However, this part is listed as Discontinued at DiGi Electronics, which may impact long-term availability. The AX7DAF1-125.0000C demonstrates lower maximum supply current (70mA versus 90mA) and lower disable-mode current (65mA versus 110mA), which may provide power efficiency benefits in applications where these specifications are not limiting factors.

Both parts carry ROHS3 compliance and identical ECCN/HTSUS classifications, supporting equivalent regulatory and export compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the AX7DAF1-125.0000C replace the ODEMDLVTNF-125.000000 in existing designs?

A: Yes. Both parts share identical frequency, output type (LVDS), supply voltage (3.3V), enable/disable functionality, frequency stability (±25ppm), operating temperature range (-40°C ~ 85°C), and package configuration (8-SMD, No Lead with 7.00mm x 5.00mm footprint). Electrical and mechanical compatibility is confirmed across all specified parameters.

Q: Are there differences in current consumption between these parts?

A: Yes. The ODEMDLVTNF-125.000000 specifies maximum supply current of 90mA with 110mA in disable mode. The AX7DAF1-125.0000C specifies 70mA maximum supply current with 65mA in disable mode. Applications with strict power budgets should verify that the lower current specifications of the Abracon part are acceptable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and share identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Q: What is the physical height difference between these oscillators?

A: The ODEMDLVTNF-125.000000 has a maximum seated height of 1.85mm, while the AX7DAF1-125.0000C has a maximum seated height of 1.90mm. This 0.05mm difference is negligible for most PCB assembly applications and does not affect package compatibility.

Q: Why is the Abracon part listed as discontinued?

A: The AX7DAF1-125.0000C is discontinued at DiGi Electronics, indicating that this distributor no longer actively stocks or supports this part. However, the part may remain available through alternative distribution channels or direct manufacturer inventory. Verify current availability through your supply chain before committing to this substitute.