OD153JE Equivalent & Substitute Parts

Part Overview

The OD153JE is a 15 kOhms ±5% 0.25W axial through-hole resistor manufactured by Ohmite as part of the Little Demon® OD series. This carbon composition resistor features pulse withstanding capability and is designed for applications requiring reliable performance in through-hole PCB assemblies. The part is currently obsolete, making equivalent and substitute parts necessary for ongoing maintenance, repair, and legacy system support.

Substiute Parts

OD153JE

OhmiteIn Stock: 967OD153JE Datasheet

Current PartRFQ

OD153KE

OhmiteIn Stock: 3415OD153KE Datasheet

MFR RecommendedRFQ

RC07GF153J

OhmiteIn Stock: 1943RC07GF153J Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the OD153JE is determined by the following critical parameters:

• Resistance Value: Must be 15 kOhms
• Power Rating: Must be 0.25W (1/4W)
• Package Type: Must be Axial
• Physical Dimensions: Must match 0.098" Dia x 0.276" L (2.50mm x 7.00mm)
• Composition: Carbon Composition
• Terminations: 2-terminal configuration

Tolerance variation (±5% vs ±10%) is permitted based on circuit design requirements. All substitute parts maintain identical electrical and mechanical specifications except where tolerance is explicitly relaxed.

Parameter Comparison

Engineering Selection Recommendations

OD153KE is the manufacturer-recommended substitute. It maintains ROHS3 compliance and identical physical and electrical specifications to the OD153JE, with the exception of tolerance relaxation from ±5% to ±10%. This tolerance difference is acceptable in applications where circuit design permits wider resistance variation. Higher inventory availability (3310 units) supports production requirements.

RC07GF153J is a parametric equivalent offering identical tolerance (±5%) and electrical performance to the OD153JE. However, this part is RoHS non-compliant, making it unsuitable for applications requiring RoHS3 compliance. The part is currently active in production, ensuring long-term availability. Selection of this part requires verification that RoHS non-compliance is acceptable for the target application.

For new designs and applications requiring RoHS3 compliance, RC07GF153J should not be selected. For legacy system repairs where RoHS compliance is not mandated, RC07GF153J provides an active-status alternative with superior tolerance matching.

Frequently Asked Questions (FAQ)

Q: Can OD153KE be used as a direct replacement for OD153JE?

A: Yes. OD153KE is the manufacturer-recommended substitute. Both parts share identical resistance, power rating, package type, and physical dimensions. The tolerance specification differs (±10% vs ±5%), which is acceptable provided circuit design tolerates the wider resistance range.

Q: What is the difference between OD153KE and RC07GF153J?

A: Both are 15 kOhms ±5% 0.25W axial resistors with identical physical dimensions. The primary differences are: OD153KE has ±10% tolerance and ROHS3 compliance; RC07GF153J has ±5% tolerance but is RoHS non-compliant. OD153KE is obsolete; RC07GF153J is active production.

Q: Is RC07GF153J suitable for RoHS-compliant applications?

A: No. RC07GF153J is RoHS non-compliant and cannot be used in applications requiring RoHS3 certification or compliance verification.

Q: Are all three parts physically interchangeable?

A: Yes. All three parts share identical axial package configuration and physical dimensions (0.098" Dia x 0.276" L). They are mechanically interchangeable in through-hole PCB assemblies.

Q: Which substitute should be selected for new production?

A: OD153KE is recommended for new production due to ROHS3 compliance and manufacturer recommendation status. RC07GF153J should only be selected if RoHS non-compliance is acceptable and ±5% tolerance is required.

Q: What is the impact of tolerance difference between OD153JE and OD153KE?

A: OD153JE specifies ±5% tolerance (14.25 kOhms to 15.75 kOhms), while OD153KE specifies ±10% tolerance (14.6 kOhms to 16.5 kOhms). The wider tolerance of OD153KE may affect circuit performance in applications with tight resistance requirements. Circuit analysis is required to determine acceptability.