NTP60N06 N-Channel 60V 60A MOSFET Equivalent & Substitute Parts

Part Overview

The NTP60N06 is an N-Channel MOSFET manufactured by onsemi, rated for 60V drain-to-source voltage and 60A continuous drain current in a Through Hole TO-220 package. This device is classified as Obsolete, making equivalent and substitute parts necessary for ongoing production and design requirements. The part operates across a temperature range of -55°C to 175°C and features a maximum on-resistance of 14mOhm at 30A and 10V gate-source voltage.

Key Parameters

Parameter	Value	Unit
Drain-to-Source Voltage (Vdss)	60	V
Continuous Drain Current (Id) @ 25°C	60	A
On-Resistance (Rds On Max) @ 30A, 10V	14	mOhm
Gate-Source Threshold Voltage (Vgs(th)) @ 250µA	4	V
Gate Charge (Qg) @ 10V	81	nC
Input Capacitance (Ciss) @ 25V	3220	pF
Maximum Gate-Source Voltage (Vgs Max)	±20	V
Operating Temperature Range	-55 to 175	°C
Package Type	TO-220-3	Through Hole
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the NTP60N06 is determined by the following critical parameters:

Voltage Rating Compatibility: All substitute parts must maintain a Drain-to-Source Voltage (Vdss) rating of 60V or higher to ensure safe operation in circuits designed for the NTP60N06.

Current Capability: Substitute parts must support a continuous drain current (Id) of 60A or greater at 25°C to meet or exceed the original specification.

On-Resistance (Rds On): The maximum on-resistance at rated conditions must not significantly exceed 14mOhm to maintain thermal performance and power dissipation characteristics within acceptable limits.

Gate Characteristics: Gate-source threshold voltage (Vgs(th)) and maximum gate-source voltage (Vgs Max) must be compatible with existing gate drive circuits. The NTP60N06 specifies 4V threshold and ±20V maximum.

Package and Mounting: All substitutes must use the TO-220-3 Through Hole package to ensure mechanical and electrical compatibility with existing PCB layouts.

Temperature Range: Operating temperature range must encompass -55°C to 175°C to maintain functionality across the full operational envelope.

Parameter Comparison

Part Number	Manufacturer	Vdss (V)	Id @ 25°C (A)	Rds On Max (mOhm)	Vgs(th) (V)	Qg @ 10V (nC)	Ciss @ 25V (pF)	Vgs Max (±V)	Temp Range (°C)	Package	Status
NTP60N06	onsemi	60	60	14	4	81	3220	20	-55 to 175	TO-220-3	Obsolete
STP60NF06L	STMicroelectronics	60	60	14	1	66	2000	15	-65 to 175	TO-220-3	Active
HUF75339P3	onsemi	55	75	12	4	130	2000	20	-55 to 175	TO-220-3	Active
IRF1010EZPBF	Infineon Technologies	60	75	8.5	4	86	2810	20	-55 to 175	TO-220-3	Active
IRF1018EPBF	Infineon Technologies	60	79	8.4	4	69	2290	20	-55 to 175	TO-220-3	Active
IRFZ44VZPBF	Infineon Technologies	60	57	12	4	65	1690	20	-55 to 175	TO-220-3	Not For New Designs
DMT6009LCT	Diodes Incorporated	60	37.2	12	2	33.5	1925	16	-55 to 150	TO-220-3	Active
PSMN4R6-60PS,127	Nexperia USA Inc.	60	100	4.6	4	70.8	4426	20	-55 to 175	TO-220-3	Obsolete
PSMN3R0-60PS,127	Nexperia USA Inc.	60	100	3	4	130	8079	20	-55 to 175	TO-220-3	Obsolete
SQP60N06-15_GE3	Vishay Siliconix	60	56	15	3.5	50	2480	20	-55 to 175	TO-220-3	Obsolete
IRF1010EPBF	Infineon Technologies	60	84	12	4	130	3210	20	-55 to 175	TO-220-3	Not For New Designs

Engineering Selection Recommendations

Primary Recommendation: STP60NF06L

The STP60NF06L manufactured by STMicroelectronics is the direct equivalent for the NTP60N06. Both devices share identical voltage and current ratings (60V, 60A) and on-resistance specifications (14mOhm @ 30A, 10V). The STP60NF06L is classified as Active, ensuring long-term availability and supply chain stability. This part carries RoHS3 compliance and maintains the same operating temperature range (-55°C to 175°C). The lower gate charge (66nC versus 81nC) and reduced input capacitance (2000pF versus 3220pF) provide improved switching performance characteristics.

Secondary Recommendation: IRF1010EZPBF

The IRF1010EZPBF from Infineon Technologies provides enhanced current capability (75A versus 60A) while maintaining the 60V voltage rating. This part is classified as Active and carries RoHS3 compliance. The superior on-resistance (8.5mOhm @ 51A, 10V) results in lower power dissipation and improved thermal performance. The gate characteristics remain compatible with standard gate drive circuits (4V threshold, ±20V maximum). This device is suitable for applications requiring higher current margins or improved efficiency.

Alternative Recommendation: IRF1018EPBF

The IRF1018EPBF from Infineon Technologies offers 79A continuous drain current with 60V voltage rating and Active product status. This part features excellent on-resistance (8.4mOhm @ 47A, 10V) and carries RoHS3 compliance. The lower gate charge (69nC) and reduced input capacitance (2290pF) support faster switching transitions compared to the original NTP60N06.

Not Recommended for New Designs:

The IRFZ44VZPBF and IRF1010EPBF are classified as "Not For New Designs" and should not be selected for new product development, despite meeting electrical specifications. These parts are suitable only for legacy system maintenance and repair applications.

Obsolete Status Considerations:

The PSMN3R0-60PS,127, PSMN4R6-60PS,127, and SQP60N06-15_GE3 are classified as Obsolete. While these parts may meet electrical requirements, their obsolete status presents supply chain risk. Selection of these parts should be limited to applications where existing inventory is available or where long-term supply agreements are established.

Current-Limited Applications:

The DMT6009LCT from Diodes Incorporated is rated for 37.2A continuous drain current, which is below the NTP60N06 specification of 60A. This part is suitable only for applications where the actual circuit current requirement is 37.2A or less, and should not be used as a direct replacement in circuits designed for 60A operation.

Frequently Asked Questions (FAQ)

Q: Can the STP60NF06L be used as a direct replacement for the NTP60N06?

A: Yes. The STP60NF06L is a direct equivalent with identical voltage (60V) and current (60A) ratings, matching on-resistance specifications (14mOhm @ 30A, 10V), and compatible gate characteristics. The STP60NF06L is Active and RoHS3 compliant, making it the preferred replacement for obsolete NTP60N06 applications.

Q: What is the difference between the IRF1010EZPBF and IRF1010EPBF?

A: Both devices are manufactured by Infineon Technologies with 60V voltage rating and TO-220-3 package. The IRF1010EZPBF is rated for 75A continuous drain current and is classified as Active. The IRF1010EPBF is rated for 84A continuous drain current but is classified as "Not For New Designs." For new product development, the IRF1010EZPBF is the appropriate selection.

Q: Are the PSMN3R0-60PS,127 and PSMN4R6-60PS,127 suitable replacements?

A: Both parts meet the voltage and current requirements (60V, 100A) and feature superior on-resistance characteristics (3mOhm and 4.6mOhm respectively). However, both are classified as Obsolete. These parts should be considered only when existing inventory is available or when supply agreements guarantee long-term availability. For new designs, Active alternatives such as STP60NF06L or IRF1010EZPBF are preferred.

Q: Why does the HUF75339P3 have a lower voltage rating (55V) than the NTP60N06 (60V)?

A: The HUF75339P3 is rated for 55V drain-to-source voltage, which is 5V lower than the NTP60N06 specification of 60V. This part is suitable for applications where the maximum circuit voltage does not exceed 55V. For circuits designed for 60V operation, this part does not provide equivalent voltage margin and should not be used as a direct replacement.

Q: What are the key differences between the NTP60N06 and STP60NF06L in terms of switching performance?

A: The STP60NF06L features lower gate charge (66nC versus 81nC @ 10V) and reduced input capacitance (2000pF versus 3220pF @ 25V). These characteristics result in faster switching transitions and reduced gate drive power requirements. The lower threshold voltage (1V versus 4V) of the STP60NF06L may require verification of gate drive circuit compatibility in existing designs.

Q: Is the DMT6009LCT a suitable replacement for the NTP60N06?

A: The DMT6009LCT is rated for 37.2A continuous drain current, which is significantly below the NTP60N06 specification of 60A. This part is not suitable as a direct replacement for circuits designed for 60A operation. The DMT6009LCT is appropriate only for applications where the actual circuit current requirement does not exceed 37.2A.

Q: What compliance certifications should I verify when selecting a substitute part?

A: Verify RoHS compliance status for your application requirements. The STP60NF06L, IRF1010EZPBF, IRF1018EPBF, and other Active parts carry RoHS3 compliance. All substitute parts listed maintain REACH Unaffected status and EAR99 export classification, matching the original NTP60N06 specifications.

Q: Can I use a part with higher current rating as a substitute?

A: Yes, provided all other electrical parameters remain compatible. Parts such as IRF1010EZPBF (75A), IRF1018EPBF (79A), and PSMN4R6-60PS,127 (100A) can be used in applications designed for the 60A NTP60N06, as they provide additional current margin. Verify that the on-resistance and thermal characteristics are acceptable for your specific application.

Q: What is the significance of the "Not For New Designs" product status?

A: Parts classified as "Not For New Designs" are in mature or declining production phases. While these parts may meet electrical specifications, manufacturers do not recommend their use in new product development due to potential supply discontinuation. These parts are suitable only for legacy system maintenance, repair, and field service applications where existing inventory is available.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message