NOIV2SN2000A-QDC Equivalent & Substitute Parts

Part Overview

The NOIV2SN2000A-QDC is a CMOS image sensor manufactured by onsemi, featuring a 2.3MP resolution with 1920H x 1080V active pixel array and 4.8µm x 4.8µm pixel size. The device is packaged in a 52-PLCC (19.1x19.1) configuration and operates at supply voltages of 1.8V and 3.3V. This part is currently obsolete, making equivalent or substitute components necessary for new designs or production continuity.

Substiute Parts

NOIV2SN2000A-QDC

onsemiIn Stock: 1350NOIV2SN2000A-QDC Datasheet

Current PartRFQ

NOIP1SN2000A-QDC

onsemiIn Stock: 942NOIP1SN2000A-QDC Datasheet

SimilarRFQ

NOIV1SN2000-QDC

onsemiIn Stock: 1159NOIV1SN2000-QDC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the NOIV2SN2000A-QDC are evaluated based on the following critical parameters:

• Active Pixel Array (Resolution): 1920H x 1080V
• Pixel Size: 4.8µm x 4.8µm
• Package Type: 52-LCC or compatible
• Voltage Supply Range: Compatibility with 1.8V and 3.3V operation
• Operating Temperature Range: Minimum coverage of 0°C ~ 70°C

The NOIV1SN2000-QDC meets these core substitution criteria with identical resolution, pixel size, and package configuration. The NOIP1SN2000A-QDC offers higher performance specifications but differs in package type (84-LCC) and resolution (1920H x 1200V), making it suitable only for applications where these differences are acceptable.

Parameter Comparison

Engineering Selection Recommendations

NOIV1SN2000-QDC is the primary substitute for direct replacement applications. This part maintains identical active pixel array dimensions (1920H x 1080V), pixel size (4.8µm x 4.8µm), and package configuration (52-LCC). The NOIV1SN2000-QDC is currently active in production with ROHS3 compliance and superior moisture sensitivity rating (MSL 1 vs. MSL 3). The primary trade-off is reduced frame rate (23 fps vs. 92 fps); this substitution is appropriate only when frame rate requirements can be met at 23 fps.

NOIP1SN2000A-QDC is suitable for applications where package size constraints can be accommodated and higher performance is required. This part features integrated processor functionality, higher frame rate (230 fps), and extended operating temperature range (-40°C ~ 85°C). The 84-LCC package is larger than the original 52-LCC, and the resolution is increased to 1920H x 1200V. This substitution requires PCB redesign and is appropriate only when these performance enhancements justify the design modifications.

Frequently Asked Questions (FAQ)

Q: Can NOIV1SN2000-QDC directly replace NOIV2SN2000A-QDC in existing designs?

A: Direct replacement is possible from an electrical and optical standpoint. Both devices share identical active pixel array (1920H x 1080V), pixel size (4.8µm x 4.8µm), and 52-LCC package configuration. However, the frame rate difference (23 fps vs. 92 fps) must be verified against application requirements. No PCB modifications are required.

Q: What are the key differences between NOIV1SN2000-QDC and NOIP1SN2000A-QDC?

A: The NOIV1SN2000-QDC is a standard CMOS image sensor, while NOIP1SN2000A-QDC includes integrated processor functionality. The NOIP1SN2000A-QDC offers higher frame rate (230 fps vs. 23 fps) and extended temperature range (-40°C ~ 85°C vs. 0°C ~ 70°C), but uses an 84-LCC package instead of 52-LCC and has higher vertical resolution (1200V vs. 1080V).

Q: Is the NOIP1SN2000A-QDC a pin-compatible replacement?

A: No. The NOIP1SN2000A-QDC uses an 84-LCC package compared to the 52-LCC package of the original part. Pin count and layout differ significantly, requiring PCB redesign for implementation.

Q: What is the impact of MSL rating differences?

A: The NOIV2SN2000A-QDC has MSL 3 (168 hours), while both substitute parts have MSL 1 (unlimited). Lower MSL ratings indicate better moisture resistance and reduced sensitivity to humidity during storage and handling. Both substitutes offer superior moisture performance characteristics.

Q: Are both substitute parts ROHS3 compliant?

A: Yes. Both NOIV1SN2000-QDC and NOIP1SN2000A-QDC are ROHS3 compliant. The original NOIV2SN2000A-QDC RoHS status is not specified in available documentation.