NOIP1SN2000A-QDI Equivalent & Substitute Parts

Part Overview

The NOIP1SN2000A-QDI is a CMOS image sensor with integrated processor from onsemi's Python series, designed for 2-megapixel imaging applications. This component features a 1920H x 1200V active pixel array with 4.5µm x 4.5µm pixel dimensions, capable of 230 frames per second operation. The device is currently classified as obsolete, necessitating identification of functionally compatible alternatives for ongoing system support and new designs requiring equivalent imaging performance.

Substiute Parts

NOIP1SN2000A-QDI

onsemiIn Stock: 1192NOIP1SN2000A-QDI Datasheet

Current PartRFQ

NOIP1SN2000A-QTI

onsemiIn Stock: 36141NOIP1SN2000A-QTI Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the NOIP1SN2000A-QDI is determined by the following critical parameters:

• Package compatibility: 84-LCC (19x19) form factor
• Series alignment: Python series optical sensor family
• Sensor type: CMOS architecture
• Operating temperature range: -40°C ~ 85°C (TJ)
• Regulatory compliance: ROHS3 and REACH status
• Moisture sensitivity level: MSL 3 (168 Hours)

The NOIP1SN2000A-QTI qualifies as a direct substitute based on matching package geometry, series designation, CMOS architecture, temperature operating range, and equivalent compliance certifications. Both devices maintain identical thermal specifications and regulatory standing within the Python sensor family.

Parameter Comparison

Engineering Selection Recommendations

The NOIP1SN2000A-QTI is the qualified substitute for the obsolete NOIP1SN2000A-QDI. Selection is based on the following engineering criteria:

• Both devices maintain identical 84-LCC (19x19) package geometry, ensuring direct PCB compatibility without layout modifications
• Operating temperature specifications are identical across the full -40°C to 85°C range, supporting equivalent thermal performance in target applications
• ROHS3 compliance and REACH unaffected status are maintained, preserving regulatory standing for both legacy and new designs
• MSL 3 rating with 168-hour floor life specification is consistent, allowing equivalent moisture control procedures during assembly and storage
• Active production status of the NOIP1SN2000A-QTI ensures long-term availability and supply chain stability compared to the obsolete primary part

The substitute part is suitable for direct replacement in existing designs and for new development requiring 2-megapixel CMOS imaging capability within the Python sensor family.

Frequently Asked Questions (FAQ)

Q: Can the NOIP1SN2000A-QTI be used as a direct drop-in replacement for the NOIP1SN2000A-QDI?

A: Yes. Both devices share identical 84-LCC (19x19) package geometry and operating temperature specifications (-40°C ~ 85°C TJ). PCB footprints and thermal management requirements are equivalent.

Q: What are the differences between these two parts?

A: The primary differences are pixel size (4.5µm vs. 4.8µm), frame rate (230 fps vs. 225 fps), and product status (obsolete vs. active). The NOIP1SN2000A-QTI includes LVDS output capability. These variations do not prevent substitution in applications designed for the original part's specifications.

Q: Are the moisture sensitivity levels the same?

A: Yes. Both parts carry MSL 3 rating with 168-hour floor life specification, requiring identical handling and storage protocols during manufacturing and assembly.

Q: Does the substitute part maintain the same regulatory compliance?

A: Yes. The NOIP1SN2000A-QTI is ROHS3 compliant and REACH unaffected, matching the compliance profile of the original part.

Q: Why is the original part listed as obsolete?

A: The NOIP1SN2000A-QDI has reached end-of-life status within onsemi's product portfolio. The NOIP1SN2000A-QTI remains in active production and is the recommended path for continued system support and new designs.