NOIP1FN2000A-QDI Equivalent & Substitute Parts

Part Overview

The NOIP1FN2000A-QDI is a CMOS image sensor with integrated processor from onsemi's Python series, designed for 2-megapixel imaging applications. This component features a 1920H x 1200V active pixel array with 4.5µm x 4.5µm pixel dimensions and operates at frame rates up to 230 fps. The device is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

NOIP1FN2000A-QDI

onsemiIn Stock: 2232NOIP1FN2000A-QDI Datasheet

Current PartRFQ

NOIP1SN2000A-QTI

onsemiIn Stock: 36141NOIP1SN2000A-QTI Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the NOIP1FN2000A-QDI is determined by the following critical parameters:

Package Compatibility: Both the main part and substitute must use the 84-LCC (19x19) package to ensure mechanical and electrical pin compatibility.

Series Alignment: Both components belong to onsemi's Python series, ensuring architectural consistency and firmware compatibility.

Sensor Type: The main part is a CMOS with Processor. Substitute parts must maintain CMOS technology to preserve signal processing characteristics.

Operating Temperature Range: The specified range of -40°C ~ 85°C (TJ) must be met or exceeded by substitute parts.

Compliance Standards: RoHS3 compliance and REACH unaffected status are mandatory for regulatory alignment.

The NOIP1SN2000A-QTI meets these substitution criteria while maintaining active product status and current availability.

Parameter Comparison

Engineering Selection Recommendations

The NOIP1SN2000A-QTI is a direct substitute for the obsolete NOIP1FN2000A-QDI based on the following factors:

Package Compatibility: Both components use identical 84-LCC (19x19) packaging, ensuring pin-for-pin mechanical and electrical compatibility without PCB redesign.

Regulatory Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements.

Product Availability: The NOIP1SN2000A-QTI holds active product status with substantial inventory (36,100 pcs), providing long-term supply security compared to the obsolete main part.

Thermal Specifications: Identical operating temperature ranges (-40°C ~ 85°C TJ) ensure thermal performance equivalence across application environments.

Series Continuity: Both components are part of onsemi's Python series, maintaining architectural and firmware compatibility within existing system designs.

Frequently Asked Questions (FAQ)

Q: Can the NOIP1SN2000A-QTI be used as a direct replacement without PCB modifications?

A: Yes. Both parts use the 84-LCC (19x19) package with identical pin configurations, eliminating the need for PCB redesign or layout changes.

Q: What are the differences in pixel size between these components?

A: The main part (NOIP1FN2000A-QDI) has 4.5µm x 4.5µm pixels, while the substitute (NOIP1SN2000A-QTI) has 4.8µm x 4.8µm pixels. This difference affects optical characteristics and must be evaluated against application-specific imaging requirements.

Q: Is there a frame rate difference between the two parts?

A: The main part operates at 230 fps, while the substitute operates at 225 fps. This 5 fps difference is negligible for most imaging applications but should be verified against system timing requirements.

Q: Why is the main part classified as obsolete?

A: The NOIP1FN2000A-QDI is no longer in active production. The NOIP1SN2000A-QTI represents the active continuation within the Python series and is the recommended alternative for new designs and ongoing support.

Q: Are the supply voltage specifications compatible?

A: The main part specifies 1.8V ~ 3.3V supply voltage. The substitute part does not list voltage specifications in the provided data. Verify supply voltage compatibility with the substitute part datasheet before implementation.

Q: Do both parts meet the same environmental compliance standards?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and share identical Moisture Sensitivity Level (MSL) ratings of 3 (168 Hours), ensuring equivalent handling and storage requirements.