NOIP1FN1300A-QDI Equivalent & Substitute Parts

Part Overview

The NOIP1FN1300A-QDI is a 1.3MP CMOS image sensor from onsemi's Python series, housed in a 48-LCC package. This component is classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and new design implementations. The optical sensor category requires precise parameter matching to ensure functional equivalence in imaging applications.

Substiute Parts

NOIP1FN1300A-QDI

onsemiIn Stock: 631NOIP1FN1300A-QDI Datasheet

Current PartRFQ

NOIP1FN1300A-QTI

onsemiIn Stock: 772NOIP1FN1300A-QTI Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the NOIP1FN1300A-QDI is determined by the following critical parameters:

• Manufacturer and Series: Both parts must originate from onsemi and belong to the Python series to ensure design compatibility
• Resolution and Sensor Type: 1.3MP CMOS image sensor specification must be maintained
• Package Type: 48-LCC (14.22x14.22mm) package is mandatory for mechanical and electrical compatibility
• Regulatory Compliance: RoHS3 compliance, REACH unaffected status, and EAR99 ECCN classification must be preserved
• Moisture Sensitivity: MSL 3 rating ensures equivalent handling and storage requirements

The NOIP1FN1300A-QTI qualifies as a direct substitute based on these parameters. The primary distinction is packaging format (tray versus the original specification) and active product status, which provides supply chain advantages.

Parameter Comparison

Engineering Selection Recommendations

The NOIP1FN1300A-QTI is the qualified substitute for the obsolete NOIP1FN1300A-QDI. Selection is based on:

• Regulatory Alignment: Both parts maintain ROHS3 compliance, REACH unaffected status, and identical ECCN/HTSUS classifications, ensuring no regulatory barriers to substitution
• Product Status: The substitute is active in production, providing supply chain continuity and long-term availability
• Compliance Equivalence: Identical moisture sensitivity levels and handling requirements eliminate process changes
• Functional Compatibility: Matching sensor specifications, package geometry, and series designation ensure direct functional replacement

Frequently Asked Questions (FAQ)

Q: Can the NOIP1FN1300A-QTI be used as a direct replacement for the NOIP1FN1300A-QDI?

A: Yes. Both parts are onsemi Python series 1.3MP CMOS image sensors in 48-LCC packages with identical regulatory compliance profiles. The substitute is functionally equivalent for imaging applications.

Q: What is the difference between the two part numbers?

A: The primary difference is product status and packaging format. The NOIP1FN1300A-QDI is obsolete, while the NOIP1FN1300A-QTI is active production. The substitute uses tray packaging, which is standard for active components.

Q: Are there any compliance concerns with substitution?

A: No. Both parts share identical RoHS3 compliance, REACH unaffected status, ECCN classification (EAR99), and HTSUS codes. Substitution introduces no regulatory complications.

Q: Do the parts have the same moisture sensitivity requirements?

A: Yes. Both parts are rated MSL 3 (168 Hours), requiring identical handling, storage, and reflow procedures.

Q: Is the 48-LCC package identical between both parts?

A: Yes. Both use the 48-LCC package with 14.22x14.22mm dimensions, ensuring mechanical and electrical compatibility in existing PCB designs.