Equivalent & Substitute Parts for NML1205SC

Part Overview

NML1205SC is a DC-DC Converter manufactured by Murata Power Solutions Inc., categorized as an isolated module designed for ITE (Commercial) applications. It provides a single, regulated 5V output at up to 400mA with 2W power capability, supporting input voltages from 10.8V to 13.2V, and offers 1kV isolation. The product is active, with ROHS3 and REACH compliance. Identifying alternative models is necessary for maintaining supply chain resilience, ensuring form-fit-function compatibility, and providing options in case of shortages.

Substiute Parts

NML1205SC

Murata Power Solutions Inc.In Stock: 3745NML1205SC Datasheet

Current PartRFQ

RI-1205S

Recom PowerIn Stock: 93347RI-1205S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is based on strict equivalence among electrical ratings, mechanical configuration, and compliance status. The allowed substitute must match or exceed the following parameters: voltage input range, output voltage, output current, output power, isolation voltage, number of outputs, operating temperature, mounting type, package type, and compliance status (RoHS/REACH). All listed parameters must be directly matched without deviation for proper substitution within the DC-DC converter category.

Parameter Comparison

Engineering Selection Recommendations

Select substitute parts only if the product status is active and regulatory compliance requirements such as ROHS3 and REACH are fulfilled. Both NML1205SC and RI-1205S are listed as active with identical compliance profiles, facilitating direct substitution for commercial ITE applications.

Frequently Asked Questions (FAQ)

Q: What are the required electrical parameters for substitution?
A: Substitute parts must match voltage input range (10.8V-13.2V), output voltage (5V), output current (400mA), power rating (2W), and isolation voltage (1kV).

Q: Can I substitute based on package type?
A: Yes. Substitution is valid with an identical package / case (4-SIP Module) and, if applicable, matching form factor to ensure mechanical fit.

Q: Are there compliance requirements for substitutes?
A: Both ROHS3 and REACH compliance are mandatory for substitution in commercial ITE applications.

Q: Is operating temperature important for substitution?
A: Yes. The substitute must offer the same operating temperature range (-40°C ~ 85°C).

Q: How should I compare part status when selecting a substitute?
A: Only active status parts should be considered for substitution to ensure ongoing availability and support.