NL-SW-LTE-TEUG Equivalent & Substitute Parts

Part Overview

The NL-SW-LTE-TEUG is a cellular and navigation transceiver module manufactured by NimbeLink, LLC, part of the Skywire™ series. This RF module integrates HSPA+, LTE, GPS, and GLONASS capabilities with U.FL antenna connectors and through-hole mounting. The product is currently obsolete, making identification of compatible substitute parts essential for legacy system maintenance, redesigns, and component sourcing.

Substiute Parts

NL-SW-LTE-TEUG

NimbeLink, LLCIn Stock: 966NL-SW-LTE-TEUG Datasheet

Current PartRFQ

NL-SW-LTE-TC4EU

NimbeLink, LLCIn Stock: 1067NL-SW-LTE-TC4EU Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the NL-SW-LTE-TEUG is determined by strict alignment of the following critical parameters:

Mandatory Compatibility Criteria:

• Manufacturer: NimbeLink, LLC (Skywire™ series)
• Mounting Type: Through Hole
• Package/Case: 20-DIP Module
• Antenna Connector: U.FL
• Serial Interfaces: UART, USB
• Voltage Supply Range: 3.5V ~ 4.3V
• Operating Temperature Range: -40°C ~ 85°C

Functional Compatibility Criteria:

• RF Family/Standard: Cellular (primary function)
• Antenna Type: U.FL Through Hole (physical interface requirement)

The identified substitute part NL-SW-LTE-TC4EU meets all mandatory physical and electrical compatibility criteria. While the substitute operates on different cellular protocols (4G LTE CAT-4 with 3G/2G fallback for Europe versus HSPA+/LTE for the original), both modules share identical mechanical form factors, power supply specifications, mounting characteristics, and serial communication interfaces.

Parameter Comparison

Engineering Selection Recommendations

Both the NL-SW-LTE-TEUG and NL-SW-LTE-TC4EU are obsolete products. Selection between these parts depends on application-specific requirements:

NL-SW-LTE-TEUG is appropriate for applications requiring GPS and GLONASS navigation capabilities combined with HSPA+ and LTE cellular connectivity across 800MHz, 1.8GHz, and 2.6GHz bands.

NL-SW-LTE-TC4EU is appropriate for European cellular deployments requiring 4G LTE CAT-4 with 3G/2G fallback across 800MHz, 900MHz, 1.8GHz, 2.1GHz, and 2.6GHz bands. This substitute does not include GPS/GLONASS navigation functionality.

Both modules share identical electrical supply specifications (3.5V ~ 4.3V), thermal operating range (-40°C ~ 85°C), physical form factor (20-DIP Through Hole), antenna interface (U.FL), and serial communication protocols (UART, USB). The NL-SW-LTE-TC4EU offers higher data rate capability (150Mbps versus 100Mbps) and extended frequency band coverage.

Frequently Asked Questions (FAQ)

Q: Can NL-SW-LTE-TC4EU directly replace NL-SW-LTE-TEUG in existing designs?

A: Physical and electrical compatibility is confirmed. Both modules use identical 20-DIP through-hole packages, U.FL antenna connectors, 3.5V–4.3V power supplies, and UART/USB serial interfaces. However, the substitute lacks GPS/GLONASS navigation capabilities and operates on different cellular protocols optimized for European markets. Application firmware and network configuration must be evaluated for compatibility.

Q: What are the key differences between these modules?

A: The primary differences are protocol support and navigation capability. NL-SW-LTE-TEUG includes GPS and GLONASS with HSPA+/LTE support. NL-SW-LTE-TC4EU provides 4G LTE CAT-4 with 3G/2G fallback for Europe without navigation functions. The substitute supports additional frequency bands (900MHz and 2.1GHz) and achieves higher data rates (150Mbps versus 100Mbps).

Q: Are there packaging differences between these parts?

A: Both modules use 20-DIP through-hole packages with U.FL antenna connectors. The main part number is packaged in standard format, while the substitute is supplied in trays. Both share identical mechanical dimensions and mounting requirements.

Q: What is the significance of the obsolete product status?

A: Both parts are obsolete, indicating discontinued manufacturing. Existing inventory may be available through authorized distributors, but long-term availability is not guaranteed. Design teams should evaluate alternative current-generation modules for new applications.

Q: Are there RoHS compliance differences?

A: The substitute part (NL-SW-LTE-TC4EU) is explicitly marked as RoHS Compliant. RoHS status for the main part (NL-SW-LTE-TEUG) is not specified in the provided data.