NL-SW-LTE-GELS3-D Equivalent & Substitute Parts

Part Overview

The NL-SW-LTE-GELS3-D is a Cellular 4G LTE CAT-1 (Verizon) Transceiver Module manufactured by NimbeLink, LLC, operating at 700MHz and 1.7GHz frequencies. This module features U.FL Through Hole antenna connectivity and supports UART and USB serial interfaces. The product is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components to maintain design continuity and supply chain availability.

Substiute Parts

NL-SW-LTE-GELS3-D

NimbeLink, LLCIn Stock: 1024NL-SW-LTE-GELS3-D Datasheet

Current PartRFQ

NL-SW-LTE-GELS3-E

NimbeLink, LLCIn Stock: 2053NL-SW-LTE-GELS3-E Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The NL-SW-LTE-GELS3-E qualifies as a direct substitute for the NL-SW-LTE-GELS3-D based on the following critical parameters:

Matching Parameters:

• RF Family/Standard: Cellular
• Protocol: 4G LTE CAT-1 (Verizon)
• Frequency: 700MHz, 1.7GHz
• Serial Interfaces: UART, USB
• Antenna Type: Antenna Not Included, U.FL
• Voltage - Supply: 3V ~ 5.5V
• Mounting Type: Through Hole
• Package / Case: 20-DIP Module
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

These parameters define the functional and mechanical compatibility required for substitution within the same application context.

Parameter Comparison

Engineering Selection Recommendations

The NL-SW-LTE-GELS3-E is the direct substitute for the discontinued NL-SW-LTE-GELS3-D. Both components share identical RF protocols, frequency bands, serial interface configurations, and mechanical form factors. The substitute maintains full compatibility with existing PCB layouts and connector specifications.

The NL-SW-LTE-GELS3-E offers the advantage of active product status, ensuring continued availability and manufacturer support. The component meets ROHS3 compliance, representing an updated environmental standard relative to the original RoHS Compliant designation. Both components carry identical export control classifications (ECCN 5A992C) and tariff codes (HTSUS 8517.62.0010).

The operating temperature range of the substitute (-30°C ~ 85°C) is narrower at the lower bound compared to the original (-40°C ~ 85°C). Applications requiring operation below -30°C must retain the original part number or evaluate alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can the NL-SW-LTE-GELS3-E be used as a direct replacement for the NL-SW-LTE-GELS3-D in existing designs?

A: Yes. Both components support identical 4G LTE CAT-1 (Verizon) protocols, operate at 700MHz and 1.7GHz, feature U.FL Through Hole antenna connectors, and use the same 20-DIP Module package. UART and USB serial interfaces are identical. Supply voltage ranges (3V ~ 5.5V) and MSL ratings match exactly.

Q: What is the difference in operating temperature range between these parts?

A: The NL-SW-LTE-GELS3-D operates from -40°C to 85°C, while the NL-SW-LTE-GELS3-E operates from -30°C to 85°C. The substitute has a 10°C higher minimum operating temperature. Applications requiring operation below -30°C must use the original part number.

Q: Are there any compliance differences between the two parts?

A: The NL-SW-LTE-GELS3-D carries RoHS Compliant certification, while the NL-SW-LTE-GELS3-E carries ROHS3 Compliant certification. Both meet environmental regulatory requirements. Export control (ECCN 5A992C) and tariff classifications (HTSUS 8517.62.0010) are identical.

Q: What current specifications should be considered for power supply design?

A: The NL-SW-LTE-GELS3-E specifies 1.5A for both receiving and transmitting modes. The original part number does not provide current specifications. Power supply designs should accommodate 1.5A continuous current capacity for the substitute component.

Q: Are the packaging options different between these parts?

A: The NL-SW-LTE-GELS3-D is specified with "-" packaging notation. The NL-SW-LTE-GELS3-E is supplied in Bulk packaging. Both use identical 20-DIP Module form factors and Through Hole mounting.