NJMOP07D Equivalent & Substitute Parts Reference

Part Overview

NJMOP07D is a general purpose operational amplifier IC manufactured by Nisshinbo Micro Devices Inc., supplied in an 8-DIP through-hole package. It features a single amplifier circuit, low input bias current, and precision input offset voltage. NJMOP07D's status is obsolete, making identification of compatible alternatives necessary for continued system support, service maintenance, and design updates.

Substiute Parts

NJMOP07D

Nisshinbo Micro Devices Inc.In Stock: 1501NJMOP07D Datasheet

Current PartRFQ

OP07CP

Texas InstrumentsIn Stock: 22082OP07CP Datasheet

SimilarRFQ

OP07DP

Analog Devices Inc.In Stock: 3783OP07DP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are selected strictly based on alignment of the following key parameters: amplifier type, number of circuits, slew rate, gain bandwidth product, input bias current, input offset voltage, supply voltage range, operating temperature range, mounting type, and package specification. Parts included in this category must match or closely align with NJMOP07D's electrical and mechanical characteristics, ensuring form, fit, and function compatibility in existing designs.

Parameter Comparison

Engineering Selection Recommendations

Selection of substitute parts for NJMOP07D must consider product status and environmental compliance. OP07CP from Texas Instruments is active and ROHS3 compliant. OP07DP from Analog Devices Inc. is obsolete and RoHS non-compliant. NJMOP07D and OP07DP are both obsolete; preference should be given to active and RoHS compliant models for long-term support and sustainability. Packaging, mounting, and form factor are comparable among these options.

Frequently Asked Questions (FAQ)

Q1: What key parameters are required for selecting an equivalent to NJMOP07D?
A1: Selection must be based on amplifier type, number of circuits, slew rate, gain bandwidth, input bias current, input offset voltage, supply voltage range, operating temperature, mounting type, and package form.

Q2: Are the substitute parts mechanically compatible?
A2: All listed substitutes use an 8-DIP (0.300", 7.62mm) through-hole package and suitable supplier device packages, providing physical compatibility for direct board replacement.

Q3: Is RoHS compliance consistent across substitute options?
A3: NJMOP07D and OP07CP are RoHS compliant. OP07DP is RoHS non-compliant.

Q4: What operating temperature differences exist?
A4: NJMOP07D supports -40°C ~ 85°C; substitutes OP07CP and OP07DP support 0°C ~ 70°C.

Q5: How does supply voltage compatibility compare?
A5: NJMOP07D supports 6–44 V; OP07CP and OP07DP support 6–36 V.

Q6: Does input bias current or offset voltage differ?
A6: OP07CP matches NJMOP07D at 1.8 nA bias current and 60 µV offset. OP07DP has 12 nA bias current and 150 µV offset voltage.

Q7: What should be considered when selecting among substitutes?
A7: Product status (active vs obsolete), environmental compliance (RoHS), operating temperature, and electrical parameter alignment must all be matched for application requirements.