NJMOP-07D Equivalent & Substitute Parts Reference

Part Overview

The NJMOP-07D by Nisshinbo Micro Devices Inc. is a general purpose, single-circuit linear operational amplifier supplied in an 8-DIP (0.300", 7.62mm) package for through-hole mounting. This device is RoHS non-compliant and classified as obsolete. Due to its discontinued status and regulatory non-compliance, it is necessary to identify direct alternatives among operational amplifiers with matching or compatible electrical and mechanical parameters.

Key Parameters

Parameter	Value
Manufacturer Part Number	NJMOP-07D
Manufacturer	Nisshinbo Micro Devices Inc.
Category	Linear, Amplifiers
Amplifier Type	General Purpose
Number of Circuits	1
Slew Rate	0.17V/µs
Gain Bandwidth Product	500 kHz
Current - Input Bias	1.8 nA
Voltage - Input Offset	60 µV
Current - Supply	2.7mA
Voltage - Supply Span (Min)	6 V
Voltage - Supply Span (Max)	44 V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitutes are identified by matching primary operational amplifier parameters and ensuring package and mounting compatibility. Parameters matched include: amplifier type, number of circuits, slew rate, gain bandwidth, input bias current, input offset voltage, supply current, supply voltage range, operating temperature range, mounting type, and package. Only parts listed in the substitute list with supplied attributes are considered.

Strictly compared parameters for permitted substitution:

Amplifier Type
Number of Circuits
Slew Rate
Gain Bandwidth Product (if available)
Current - Input Bias
Voltage - Input Offset
Voltage - Supply Span (Min)/(Max)
Operating Temperature Range
Mounting Type
Package / Case
RoHS/Regulatory Status
Product Status

Parameter Comparison

Parameter	NJMOP-07D	OP07CP	OP07DP	INA118P
Amplifier Type	General Purpose	General Purpose	General Purpose	Instrumentation
Number of Circuits	1	1	1	1
Slew Rate	0.17V/µs	0.3V/µs	0.3V/µs	0.9V/µs
Gain Bandwidth Product	500 kHz	600 kHz	600 kHz	800 kHz* (−3dB BW)
Current - Input Bias	1.8 nA	1.8 nA	12 nA	1 nA
Voltage - Input Offset	60 µV	60 µV	150 µV	25 µV
Voltage - Supply Span (Min)	6 V	6 V	6 V	2.7 V
Voltage - Supply Span (Max)	44 V	36 V	36 V	36 V
Operating Temperature	-40°C ~ 85°C	0°C ~ 70°C	0°C ~ 70°C	-40°C ~ 85°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)	8-DIP (0.300", 7.62mm)
RoHS Status	RoHS non-compliant	ROHS3 Compliant	RoHS non-compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Obsolete	Active

Engineering Selection Recommendations

OP07CP and INA118P are the available RoHS-compliant alternatives for NJMOP-07D.
OP07DP matches the obsolete and non-RoHS status of NJMOP-07D and can be used where compliance status must remain unchanged.
OP07CP and INA118P are active products available in inventory, differing in amplifier type, with INA118P being an instrumentation amplifier.
Match selection primarily to status, RoHS compliance, and inventory according to project, regional, or regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Which parameters are critical for substituting the NJMOP-07D with another operational amplifier?
A: Critical parameters for substitution include amplifier type, number of circuits, slew rate, gain bandwidth, input bias current, input offset voltage, supply voltage range, operating temperature, mounting type, package/case, and RoHS/compliance status.

Q: Are the package dimensions of the substitute parts the same as the NJMOP-07D?
A: All listed substitutes use the 8-DIP (0.300", 7.62mm) through-hole package, matching the NJMOP-07D in mechanical dimensions and mounting style.

Q: What is the operational temperature range relevance in substituting these amplifiers?
A: The operational temperature range defines the environments for which the amplifier is rated. Substitutes like OP07CP and OP07DP have a range of 0°C to 70°C, which is more limited than the original -40°C to 85°C of NJMOP-07D.

Q: How does RoHS compliance affect substitute selection?
A: When RoHS compliance is required, select OP07CP or INA118P, as both are ROHS3 compliant and actively produced. OP07DP and NJMOP-07D are non-compliant.

Q: Can an instrumentation amplifier like INA118P substitute a general purpose op-amp?
A: Substitution is based only on the provided electrical and mechanical parameter alignment. INA118P is included as it appears on the explicit substitute list and matches required fields, despite being a different amplifier type.

Q: Is the supply voltage range the same for all substitutes?
A: Substitute parts listed have supply voltage ranges that at least overlap with the NJMOP-07D, with slight differences in maximum voltage and minimum thresholds where applicable.

Q: Are all substitute products currently active?
A: OP07CP and INA118P are active products; OP07DP is obsolete. Selection should match your product lifecycle and compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message