NJM2132D Equivalent & Substitute Parts

Part Overview

The NJM2132D is a general-purpose operational amplifier manufactured by Nisshinbo Micro Devices Inc., featuring dual circuits in an 8-DIP through-hole package. This device is classified as Active product status with full RoHS compliance. The NJM2132D serves applications requiring low-cost, general-purpose amplification with moderate bandwidth and slew rate characteristics. Substitute parts are necessary when addressing supply constraints, extended temperature ranges, enhanced performance specifications, or alternative manufacturer sourcing requirements while maintaining functional compatibility within the 8-DIP package form factor.

Key Parameters

Parameter	NJM2132D Value	Unit	Substitution Relevance
Amplifier Type	General Purpose	—	Critical
Number of Circuits	2	Circuits	Critical
Package / Case	8-DIP (0.300", 7.62mm)	—	Critical
Mounting Type	Through Hole	—	Critical
Slew Rate	2.1	V/µs	Performance
Gain Bandwidth Product	1.8	MHz	Performance
Current - Input Bias	20	nA	Performance
Voltage - Input Offset	2	mV	Performance
Current - Output / Channel	27	mA	Performance
Voltage - Supply Span (Min)	2.7	V	Critical
Voltage - Supply Span (Max)	32	V	Critical
Operating Temperature	-40°C ~ 85°C	—	Application-Dependent
RoHS Status	RoHS Compliant	—	Compliance

Substitute Part Grouping Explanation

Substitution compatibility for the NJM2132D is determined by strict adherence to the following critical parameters:

Package and Mounting Compatibility (Non-Negotiable): All substitute parts must feature an 8-DIP (0.300", 7.62mm) through-hole package to ensure direct PCB footprint compatibility.

Functional Architecture (Non-Negotiable): All substitutes must contain exactly 2 operational amplifier circuits to match the dual-channel configuration of the NJM2132D.

Electrical Operating Range (Critical): Substitute parts must support the voltage supply span range of 2.7V to 32V. Parts with narrower supply ranges (such as 3V minimum or 30V maximum) remain functionally compatible within the NJM2132D's specified operating envelope.

Performance Parameters (Application-Dependent): Slew rate, gain bandwidth product, input bias current, input offset voltage, and output current per channel are performance characteristics that may vary among substitutes. Higher performance values (increased slew rate, bandwidth, or output current) represent enhanced capability and remain compatible. Lower performance values require application-specific evaluation to confirm suitability.

Temperature Range (Application-Dependent): The NJM2132D operates from -40°C to 85°C. Substitute parts with narrower temperature ranges (such as 0°C to 70°C) are compatible for applications operating within the substitute's specified range.

Compliance and Regulatory Status (Recommended): RoHS3 compliance and REACH unaffected status are preferred for modern applications, though RoHS2 compliance remains acceptable for legacy systems.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Circuits	Package	Slew Rate (V/µs)	GBW (MHz)	Input Bias (nA)	Input Offset (mV)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	RoHS Status
NJM2132D	Nisshinbo Micro Devices	General Purpose	2	8-DIP	2.1	1.8	20	2	27	2.7	32	-40 to 85	RoHS Compliant
AD826ANZ	Analog Devices	Voltage Feedback	2	8-DIP	350	50	3300	0.5	50	5	36	-40 to 85	ROHS3 Compliant
AD828ANZ	Analog Devices	Voltage Feedback	2	8-DIP	450	130	—	—	50	5	36	-40 to 85	ROHS3 Compliant
AS358AP-E1	Diodes Incorporated	General Purpose	2	8-DIP	—	—	20	2	40	3	36	-40 to 85	ROHS3 Compliant
AS358P-E1	Diodes Incorporated	General Purpose	2	8-DIP	—	—	20	2	40	3	36	-40 to 85	ROHS3 Compliant
LM258AP	Texas Instruments	General Purpose	2	8-DIP	0.3	0.7	15	2	40	3	32	-25 to 85	ROHS3 Compliant
LM258P	Texas Instruments	General Purpose	2	8-DIP	0.3	0.7	20	3	40	3	32	-25 to 85	ROHS3 Compliant
LM358AN/NOPB	Texas Instruments	General Purpose	2	8-DIP	—	1	45	2	40	3	32	0 to 70	ROHS3 Compliant
LM358AP	Texas Instruments	General Purpose	2	8-DIP	0.3	0.7	15	2	40	3	30	0 to 70	ROHS3 Compliant
LM358P	Texas Instruments	General Purpose	2	8-DIP	0.3	0.7	20	3	40	3	30	0 to 70	ROHS3 Compliant
LM358PE3	Texas Instruments	General Purpose	2	8-DIP	0.3	0.7	20	3	40	3	30	0 to 70	ROHS3 Compliant

Engineering Selection Recommendations

General Purpose Amplifier Substitutes (Preferred Category):

The AS358AP-E1 and AS358P-E1 (Diodes Incorporated) represent the closest functional equivalents to the NJM2132D. Both devices maintain identical general-purpose amplifier architecture, dual-circuit configuration, matching input bias current (20 nA), and input offset voltage (2 mV). These parts support the full NJM2132D supply range (2.7V to 32V minimum, extended to 36V maximum) and operate across the identical temperature range (-40°C to 85°C). ROHS3 compliance and unlimited moisture sensitivity rating provide enhanced regulatory alignment for modern applications. Inventory availability exceeds 44,000 units across both variants.

The LM258AP and LM258P (Texas Instruments) provide general-purpose substitution with comparable input characteristics (15-20 nA bias current, 2-3 mV offset). These devices operate within the NJM2132D supply envelope (3V to 32V) but feature narrower temperature range (−25°C to 85°C for LM258AP/P, 0°C to 70°C for LM358 variants). LM258 series devices demonstrate lower slew rate (0.3 V/µs versus 2.1 V/µs) and reduced bandwidth (700 kHz versus 1.8 MHz), suitable for applications not requiring the NJM2132D's performance envelope. Inventory availability is substantial across all LM258/LM358 variants (3,596 to 53,800 units).

High-Performance Voltage Feedback Substitutes (Enhanced Performance Category):

The AD826ANZ and AD828ANZ (Analog Devices) represent performance-enhanced alternatives for applications requiring increased slew rate and bandwidth. AD826ANZ provides 350 V/µs slew rate and 50 MHz bandwidth; AD828ANZ extends to 450 V/µs and 130 MHz. Both maintain dual-circuit 8-DIP configuration and support -40°C to 85°C operation. Supply range extends to 36V maximum. These devices feature significantly elevated input bias current (3.3 µA for AD826ANZ) and reduced input offset voltage (500 µV), representing trade-offs in precision for bandwidth enhancement. ROHS3 compliance and unlimited MSL rating support modern manufacturing. Inventory availability is 3,200 to 4,800 units.

Product Status Considerations:

All substitute parts maintain Active product status except LM358PE3, which carries Last Time Buy designation. Active status parts ensure continued availability and manufacturing support. LM358PE3 remains functionally compatible but represents end-of-life inventory with limited future procurement assurance.

Compliance and Regulatory Alignment:

All substitute parts achieve ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements. The NJM2132D's RoHS Compliant designation (ROHS2 level) remains acceptable for legacy applications. Moisture sensitivity levels for substitute parts (MSL 1, Unlimited) exceed the NJM2132D specification (MSL 2, 1 Year), providing enhanced reliability in humid storage and manufacturing environments.

Frequently Asked Questions (FAQ)

Q: Can I directly replace NJM2132D with LM358AN/NOPB without PCB modifications?

A: Yes, direct pin-compatible replacement is possible. Both devices feature 8-DIP (0.300", 7.62mm) through-hole packages with identical pinout. However, LM358AN/NOPB operates within 0°C to 70°C temperature range, narrower than NJM2132D's -40°C to 85°C specification. Verify application temperature requirements before substitution. Supply voltage range compatibility is confirmed (3V to 32V for LM358AN/NOPB encompasses NJM2132D's 2.7V to 32V range).

Q: What is the performance difference between NJM2132D and AS358AP-E1?

A: Both devices share identical general-purpose amplifier architecture, dual-circuit configuration, input bias current (20 nA), and input offset voltage (2 mV). AS358AP-E1 slew rate specification is not provided in available data. Both support -40°C to 85°C operation and 2.7V to 32V supply range. AS358AP-E1 provides marginally higher output current per channel (40 mA versus 27 mA). Functional performance is equivalent for general-purpose applications.

Q: Are AD826ANZ and AD828ANZ suitable replacements for audio or precision measurement applications?

A: AD826ANZ and AD828ANZ are voltage feedback amplifiers optimized for high-speed applications, not general-purpose precision circuits. Input bias current is significantly elevated (3.3 µA for AD826ANZ versus 20 nA for NJM2132D), making these devices unsuitable for high-impedance input circuits or precision measurement applications. These substitutes are appropriate only for applications requiring bandwidth and slew rate performance exceeding NJM2132D specifications.

Q: What is the minimum supply voltage for substitute parts?

A: AS358AP-E1 and AS358P-E1 support 3V minimum supply voltage, compared to NJM2132D's 2.7V minimum. LM258/LM358 series devices also specify 3V minimum. AD826ANZ and AD828ANZ require 5V minimum supply voltage. Applications operating below 3V require NJM2132D or equivalent parts with 2.7V minimum specification.

Q: Can I use LM358PE3 for new designs?

A: LM358PE3 carries Last Time Buy product status, indicating discontinued manufacturing. This part is suitable only for legacy system maintenance or repair applications where existing inventory is available. New designs should utilize Active status alternatives such as LM358AP, LM358P, AS358AP-E1, or AS358P-E1 to ensure long-term supply continuity and manufacturing support.

Q: What is the difference between LM258AP and LM358AP?

A: Both devices are general-purpose dual operational amplifiers in 8-DIP packages with identical electrical characteristics (0.3 V/µs slew rate, 700 kHz bandwidth, 15 nA input bias current, 2 mV input offset). Primary difference is temperature range: LM258AP operates -25°C to 85°C; LM358AP operates 0°C to 70°C. LM258AP provides extended low-temperature operation for applications requiring -25°C minimum specification.

Q: Are all substitute parts RoHS compliant?

A: All listed substitute parts achieve ROHS3 compliance. NJM2132D achieves RoHS Compliant status (ROHS2 level). Both compliance levels are acceptable for current manufacturing; ROHS3 represents enhanced regulatory alignment for new designs.

Q: What inventory levels are available for substitute parts?

A: AS358P-E1 provides highest availability (67,400 units), followed by LM358P (53,800 units) and AS358AP-E1 (44,266 units). LM258AP and LM358AP provide 3,596 and 20,100 units respectively. AD826ANZ and AD828ANZ provide 4,800 and 3,200 units. LM358PE3 (Last Time Buy) provides 9,300 units with limited future availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message