NEO-6P-0 Equivalent & Substitute Parts

Part Overview

The NEO-6P-0 is a surface-mount RF receiver module manufactured by u-blox, designed for GNSS/GPS applications with -160dBm sensitivity. The module operates across a supply voltage range of 2.7V to 3.6V and supports multiple data interfaces including I2C, SPI, UART, and USB. The NEO-6P-0 is classified as obsolete, necessitating identification of active equivalent parts to maintain design continuity and ensure long-term component availability for new production and legacy system support.

Substiute Parts

NEO-6P-0

u-bloxIn Stock: 818NEO-6P-0 Datasheet

Current PartRFQ

NEO-M8P-0

u-bloxIn Stock: 2829NEO-M8P-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The NEO-M8P-0 qualifies as a direct substitute for the obsolete NEO-6P-0 based on the following alignment of critical parameters:

Electrical Compatibility:

• Identical supply voltage range: 2.7V ~ 3.6V
• Matching sensitivity specification: -160dBm
• Identical data interface support: I2C, SPI, UART, USB
• Identical operating temperature range: -40°C ~ 85°C

Mechanical Compatibility:

• Identical mounting type: Surface Mount
• Identical package format: 24-SMD Module
• Identical moisture sensitivity level: MSL 4 (72 Hours)

Regulatory Compliance:

• Both modules maintain RoHS compliance (NEO-6P-0: RoHS Compliant; NEO-M8P-0: ROHS3 Compliant)

Functional Enhancement: The NEO-M8P-0 extends protocol support beyond GPS to include BeiDou, GLONASS, and GNSS, while maintaining full backward compatibility with the original GPS-only specification of the NEO-6P-0.

Parameter Comparison

Engineering Selection Recommendations

The NEO-M8P-0 is the appropriate substitute for the obsolete NEO-6P-0 in new designs and production transitions. The substitute part maintains electrical and mechanical compatibility across all critical parameters while offering extended protocol support. The NEO-M8P-0 carries active product status with current manufacturing availability (2719 units in stock), ensuring supply chain continuity. Both modules comply with RoHS standards, with the NEO-M8P-0 meeting the more recent ROHS3 specification. The identical package format (24-SMD Module) and data interface configuration (I2C, SPI, UART, USB) enable direct board-level substitution without PCB redesign. The matching supply voltage range (2.7V ~ 3.6V) and operating temperature specifications (-40°C ~ 85°C) confirm thermal and power delivery compatibility. The NEO-M8P-0 is suitable for applications requiring GPS functionality and is compatible with designs originally specified for the NEO-6P-0.

Frequently Asked Questions (FAQ)

Q: Can the NEO-M8P-0 be used as a direct replacement for the NEO-6P-0 on existing PCBs?

A: Yes. The NEO-M8P-0 is mechanically and electrically compatible with the NEO-6P-0. Both modules use the 24-SMD Module package format and identical pin configurations. No PCB modifications are required for substitution.

Q: Are the power supply requirements identical between the two modules?

A: Yes. Both the NEO-6P-0 and NEO-M8P-0 operate with a supply voltage range of 2.7V ~ 3.6V. Existing power delivery circuits require no modification.

Q: What is the difference in protocol support between these modules?

A: The NEO-6P-0 supports GPS only. The NEO-M8P-0 supports BeiDou, GLONASS, GNSS, and GPS. This represents a functional enhancement while maintaining full GPS compatibility.

Q: Do both modules support the same data interfaces?

A: Yes. Both modules support I2C, SPI, UART, and USB data interfaces. Firmware and software implementations designed for the NEO-6P-0 are compatible with the NEO-M8P-0.

Q: Are there any differences in operating temperature ranges?

A: No. Both modules operate across the identical temperature range of -40°C to 85°C, ensuring compatibility in equivalent thermal environments.

Q: What is the moisture sensitivity level for both modules?

A: Both modules have an MSL rating of 4 (72 Hours), indicating identical handling and storage requirements.

Q: Is the NEO-M8P-0 RoHS compliant?

A: Yes. The NEO-M8P-0 is ROHS3 compliant, meeting current RoHS standards. The original NEO-6P-0 is RoHS compliant. Both modules satisfy RoHS requirements.

Q: What is the current consumption of the NEO-M8P-0?

A: The NEO-M8P-0 has a receiving current specification of 25mA. This parameter was not specified for the NEO-6P-0 in the available data.

Q: Is the NEO-M8P-0 available in the same packaging format?

A: Yes. The NEO-M8P-0 is supplied in Tape & Reel (TR) packaging as a 24-SMD Module, maintaining compatibility with automated assembly processes.