NDXD4805EC Equivalent & Substitute Parts Reference

Part Overview

The Murata Power Solutions Inc. NDXD4805EC is a DC-DC converter module rated for isolated dual output (+5V, -5V) at 750mA each, 7W total output power, and an input voltage range of 36V to 75V. It is designed for through-hole mounting and targets ITE (Commercial) applications. The part is currently classified as obsolete, making the identification of substitute models necessary for engineers seeking to ensure continued production support, replacement, or repair.

Substiute Parts

NDXD4805EC

Murata Power Solutions Inc.In Stock: 970NDXD4805EC Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are grouped strictly based on match with the following required parameters from the NDXD4805EC DC DC Converter Module category: number of outputs (2), input voltage range (36V–75V), output voltages (+5V, -5V), output currents (750mA, 750mA), total output power (7W), package and mounting type (Through Hole, 6-DIP Module), operating temperature (-40°C ~ 85°C), isolation voltage (1 kV), and commercial application compliance. Only products meeting these parameters without omission are considered suitable equivalents or substitutes.

Parameter Comparison

Engineering Selection Recommendations

NDXD4805EC is classified as Obsolete status. Murata Power Solutions Inc. provides no manufacturer-recommended substitute. Engineering selection of alternative models must be based on strict parameter equivalence in product status, regulatory and environmental compliance, and offered certifications as provided in the reference data.

Frequently Asked Questions (FAQ)

Q1: What parameters determine compatibility for a DC-DC converter substitute?
A1: Compatibility is determined by matching input voltage range, output voltages and currents, number of outputs, output power, package, mounting type, isolation voltage, operating temperature, and intended application.

Q2: Are package and mounting style critical in substitution selection?
A2: Yes, matching the package (6-DIP Module) and mounting type (Through Hole) is required for mechanical and board-level compatibility.

Q3: Does an obsolete status affect engineering selection?
A3: Yes, when a part is obsolete, only direct substitutes strictly matching all specified parameters should be considered to ensure performance and compliance.

Q4: Is environmental and compliance certification a consideration?
A4: Yes, matching REACH status, MSL rating, and other certifications is required for process compatibility and regulatory adherence.

Q5: Are there any manufacturer-recommended equivalents for NDXD4805EC?
A5: No manufacturer-recommended equivalent or substitute part is listed for NDXD4805EC.