NDS76PBA-16IT Equivalent & Substitute Parts Reference

Part Overview

The NDS76PBA-16IT is a memory IC specifically categorized as an SDRAM with 128Mbit capacity, LVTTL interface, and 54-FBGA (8x8) surface-mount package. It operates at 3V ~ 3.6V, with a 166 MHz clock frequency and 5 ns access time. The product is currently listed as Active with ROHS3 compliance and MSL 3 (168 Hours) protection. Sourcing alternative models may be necessary for supply chain risk mitigation, multi-vendor design support, or specific project requirements.

Substiute Parts

NDS76PBA-16IT

Insignis Technology CorporationIn Stock: 727NDS76PBA-16IT Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined by strict matching of the following key parameters: category (Memory), memory format (DRAM, SDRAM), memory size (128Mbit), memory organization (8M x 16), voltage range (3V ~ 3.6V), interface (LVTTL), clock frequency (166 MHz), access time (5 ns), package (54-TFBGA or 54-FBGA 8x8), operating temperature (-40°C ~ 85°C), and compliance (ROHS3, MSL 3). Only parts matching all these parameters qualify as substitutes in this product category.

Parameter Comparison

Engineering Selection Recommendations

The NDS76PBA-16IT is an active part and ROHS3 compliant with MSL 3 moisture sensitivity rating. No parametric equivalents or substitutes matching the strict criteria required for this memory IC are available within the provided input data.

Frequently Asked Questions (FAQ)

Q1: What parameters are required to determine if a part is equivalent or a substitute for the NDS76PBA-16IT?
A1: Parts must match in memory type, memory format, technology, memory size, organization, interface, voltage range, clock frequency, access time, package, operating temperature, and compliance standards.

Q2: Is there a substitute or equivalent part for the NDS76PBA-16IT?
A2: No parametric equivalents are listed for the NDS76PBA-16IT in the provided data.

Q3: Why is package compatibility critical for substituting memory ICs?
A3: Correct package and footprint (54-TFBGA or 54-FBGA 8x8) ensure electrical and mechanical fit on the PCB, affecting assembly and operation.

Q4: Can substitutes be selected based on similar parameters if an exact match is not found?
A4: Only parts strictly matching all key parameters are considered substitutes in this reference. No substitutions outside these constraints are supported based on the current input.