NCT65DMR2G Equivalent & Substitute Parts

Part Overview

The NCT65DMR2G is an analog thermostat temperature sensor manufactured by onsemi, designed for thermal management applications requiring dual-threshold switching at 70°C and 85°C. This component features active-low open-drain outputs and operates across a supply voltage range of 2.8V to 3.6V with a maximum supply current of 1.15mA. The device is classified as obsolete, making identification of functionally compatible alternatives essential for ongoing system support and new design implementations.

Substiute Parts

NCT65DMR2G

onsemiIn Stock: 1153NCT65DMR2G Datasheet

Current PartRFQ

ADT7461ARMZ-R7

onsemiIn Stock: 15504ADT7461ARMZ-R7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the NCT65DMR2G is determined by the following critical parameters:

• Package Compatibility: Both the main part and substitute must use 8-MSOP (0.118", 3.00mm Width) surface-mount packaging to ensure PCB footprint compatibility.
• Mounting Type: Surface mount requirement must be maintained.
• Supply Voltage Range: The substitute must operate within or encompass the 2.8V to 3.6V supply range.
• Operating Temperature Range: The substitute must support the -40°C to 125°C operating window or broader.
• Environmental Compliance: REACH and RoHS status must be documented for regulatory continuity.

The ADT7461ARMZ-R7 qualifies as a substitute based on matching package specifications (8-MSOP), surface-mount configuration, and overlapping operating temperature range. However, functional differences exist in output type and sensing architecture that must be evaluated during integration.

Parameter Comparison

Engineering Selection Recommendations

The ADT7461ARMZ-R7 is available as an active product with current manufacturing support, addressing the obsolescence status of the NCT65DMR2G. Both components share identical 8-MSOP packaging and surface-mount configuration, enabling direct footprint compatibility on existing PCBs.

The ADT7461ARMZ-R7 operates across a broader supply voltage range (3V to 5.5V) compared to the NCT65DMR2G (2.8V to 3.6V), providing greater flexibility in power supply design. The operating temperature range of the ADT7461ARMZ-R7 (-40°C to 120°C) is slightly narrower than the NCT65DMR2G (-40°C to 125°C) at the upper threshold.

Both components maintain identical moisture sensitivity classification (MSL 1) and REACH compliance status, ensuring consistent environmental handling and regulatory requirements.

The primary functional difference is the output interface: the NCT65DMR2G provides open-drain switching outputs, while the ADT7461ARMZ-R7 implements SMBus digital communication. This distinction requires firmware and circuit-level modifications to accommodate the different signaling protocols.

Frequently Asked Questions (FAQ)

Q: Can the ADT7461ARMZ-R7 be used as a direct pin-for-pin replacement for the NCT65DMR2G?

A: Both components use identical 8-MSOP packaging with matching pin counts and footprints, enabling physical PCB compatibility. However, the output interfaces differ fundamentally—the NCT65DMR2G provides analog open-drain switching outputs, while the ADT7461ARMZ-R7 uses SMBus digital communication. Circuit redesign and firmware modification are required for functional integration.

Q: What are the key differences in supply voltage requirements?

A: The NCT65DMR2G operates within 2.8V to 3.6V, while the ADT7461ARMZ-R7 requires 3V to 5.5V. The ADT7461ARMZ-R7's broader range accommodates both the original specification and additional voltage headroom, but designs operating below 3V must retain the NCT65DMR2G or identify alternative solutions.

Q: Are there temperature range limitations when substituting?

A: The NCT65DMR2G supports -40°C to 125°C operation, while the ADT7461ARMZ-R7 supports -40°C to 120°C. Applications requiring operation above 120°C cannot use the ADT7461ARMZ-R7 as a substitute.

Q: Do both components meet the same environmental compliance standards?

A: Yes. Both the NCT65DMR2G and ADT7461ARMZ-R7 are REACH Unaffected and maintain MSL 1 (Unlimited) moisture sensitivity classification, ensuring equivalent handling and regulatory compliance.

Q: What is the primary reason for seeking a substitute for the NCT65DMR2G?

A: The NCT65DMR2G is classified as obsolete, meaning onsemi has discontinued manufacturing. The ADT7461ARMZ-R7 is an active product with ongoing production support, making it suitable for new designs and long-term system availability.