NCP1399AFDR2G Equivalent & Substitute Parts

Part Overview

The NCP1399AFDR2G is an offline half-bridge converter IC manufactured by onsemi, designed for isolated power management applications. This PMIC operates across a switching frequency range of 20kHz to 750kHz with integrated fault protection including current limiting, overload, over-temperature, over-voltage, and short-circuit protection. The device is actively produced and widely stocked, with 3,169 units available in new original condition. Substitute parts are identified based on parametric equivalence within the NCP1399 series, maintaining identical electrical specifications and mechanical compatibility while offering alternative packaging or availability options.

Key Parameters

Parameter	Specification
Manufacturer	onsemi
Series	NCP1399
Category	Power Management (PMIC)
Topology	Half-Bridge
Output Isolation	Isolated
Voltage Supply (Vcc/Vdd)	9.5V ~ 20V
Voltage Start-Up	15.8V
Switching Frequency	20kHz ~ 750kHz
Duty Cycle	50%
Operating Temperature	-40°C ~ 125°C (TJ)
Package Type	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
MSL Rating	3 (168 Hours)
Product Status	Active

Substitute Part Grouping Explanation

Substitution within the NCP1399 series is determined by electrical parameter equivalence and mechanical compatibility. All substitute parts maintain identical specifications for topology, voltage supply range (9.5V ~ 20V), switching frequency (20kHz ~ 750kHz), duty cycle (50%), operating temperature range (-40°C ~ 125°C), and fault protection features. The primary differentiators among substitute parts are packaging format (Tape & Reel versus Cut Tape & Digi-Reel) and voltage start-up specifications. Parts with 15.8V start-up voltage are directly interchangeable with the NCP1399AFDR2G. The NCP1399AMDR2G variant features a 12V start-up voltage, which represents a parametric difference requiring design verification for applications with specific power-up sequencing requirements. All parts share identical 16-SOIC package geometry, pin configuration, and surface mount characteristics, ensuring PCB-level compatibility.

Parameter Comparison

Part Number	Packaging	Voltage Start-Up	Inventory (Pcs)	Product Status
NCP1399AFDR2G	Tape & Reel (TR)	15.8V	3,169	Active
NCP1399AADR2G	Tape & Reel (TR)	15.8V	7,800	Active
NCP1399ACDR2G	Cut Tape (CT) & Digi-Reel®	15.8V	35,300	Active
NCP1399AGDR2G	Tape & Reel (TR)	15.8V	3,368	Active
NCP1399AHDR2G	Tape & Reel (TR)	15.8V	996	Active
NCP1399AIDR2G	Tape & Reel (TR)	15.8V	3,421	Active
NCP1399AMDR2G	Cut Tape (CT) & Digi-Reel®	12V	2,800	Active
NCP1399BADR2G	Tape & Reel (TR)	15.8V	2,265	Active

Engineering Selection Recommendations

All substitute parts within the NCP1399 series maintain active product status with ROHS3 compliance and REACH unaffected designation, ensuring regulatory consistency across selections. Parts with 15.8V start-up voltage (NCP1399AADR2G, NCP1399ACDR2G, NCP1399AGDR2G, NCP1399AHDR2G, NCP1399AIDR2G, NCP1399BADR2G) are electrically equivalent to the NCP1399AFDR2G and require no design modification for direct substitution. Selection between Tape & Reel and Cut Tape & Digi-Reel packaging depends on procurement and assembly requirements rather than electrical performance. The NCP1399ACDR2G offers the highest inventory availability (35,300 units) among 15.8V variants with Cut Tape packaging. For applications requiring 12V start-up voltage, the NCP1399AMDR2G is available with equivalent electrical specifications and Cut Tape packaging. All parts maintain identical MSL rating (3, 168 Hours) and thermal operating range, supporting consistent supply chain management.

Frequently Asked Questions (FAQ)

Q: Can NCP1399AFDR2G be replaced with NCP1399AADR2G without circuit modification?

A: Yes. Both parts share identical electrical specifications including 15.8V start-up voltage, 9.5V ~ 20V supply range, 20kHz ~ 750kHz switching frequency, and 16-SOIC package geometry. The difference is packaging format (Tape & Reel for both), making them direct substitutes at the circuit level.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Both packaging formats contain the same 16-SOIC component with identical electrical and mechanical specifications. Tape & Reel packaging is supplied on continuous tape for automated pick-and-place assembly. Cut Tape & Digi-Reel packaging provides individual tape segments or reel formats suitable for different assembly workflows. Selection depends on manufacturing process requirements, not component performance.

Q: Is NCP1399AMDR2G compatible with designs using NCP1399AFDR2G?

A: NCP1399AMDR2G differs in start-up voltage (12V versus 15.8V). While both operate within the same 9.5V ~ 20V supply range and share identical switching characteristics, the lower start-up voltage may affect power-up sequencing in designs with specific bias supply requirements. Design verification is necessary before substitution.

Q: Are all NCP1399 variants ROHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory consistency across the NCP1399 series.

Q: Which substitute part offers the best availability?

A: NCP1399ACDR2G provides the highest inventory level at 35,300 units in new original stock, with 15.8V start-up voltage and Cut Tape & Digi-Reel packaging.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message