NCP136AFCT080T2G Equivalent & Substitute Parts

Part Overview

The NCP136AFCT080T2G is a linear voltage regulator IC from onsemi, classified as a Power Management (PMIC) component. It delivers a fixed positive output of 0.8V at 700mA with a maximum dropout voltage of 0.06V, housed in a 6-WLCSP (1.4x0.8mm) surface mount package. The device is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Alternative models are necessary when inventory constraints occur or when design revisions require component verification across qualified supplier networks.

Substiute Parts

NCP136AFCT080T2G

onsemiIn Stock: 9162NCP136AFCT080T2G Datasheet

Current PartRFQ

NCP136BFCT080T2G

onsemiIn Stock: 885NCP136BFCT080T2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the NCP136AFCT080T2G is determined by strict equivalence across the following critical parameters:

• Output voltage specification (0.8V fixed)
• Output current capability (700mA)
• Maximum input voltage (5.5V)
• Dropout voltage performance (0.06V @ 700mA)
• Package form factor (6-WLCSP, 1.4x0.8mm)
• Mounting type (Surface Mount)
• Operating temperature range (-40°C ~ 85°C)
• Regulatory compliance (ROHS3, REACH Unaffected)

The NCP136BFCT080T2G qualifies as a parametric equivalent based on identical electrical specifications and mechanical compatibility across all listed parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the NCP136AFCT080T2G and NCP136BFCT080T2G are active production components from onsemi with identical electrical and mechanical specifications. Selection between these parts is based on availability and supply chain requirements. Both devices maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in target applications. The MSL 1 rating permits unlimited shelf life storage without moisture bake requirements. Component selection should prioritize inventory availability while maintaining design specification compliance.

Frequently Asked Questions (FAQ)

Q: Can NCP136BFCT080T2G be used as a direct replacement for NCP136AFCT080T2G?

A: Yes. Both parts are parametric equivalents with identical output voltage (0.8V), output current (700mA), dropout voltage (0.06V @ 700mA), and 6-WLCSP package specifications. No circuit modifications are required.

Q: Are there any differences in the package footprint between these parts?

A: No. Both parts use the 6-WLCSP (1.4x0.8mm) package form factor with identical mechanical dimensions and pin configurations.

Q: What is the significance of the part number suffix difference (A vs. B)?

A: The suffix indicates internal design revision or manufacturing process generation. Both revisions meet identical electrical and mechanical specifications as provided in the datasheet parameters.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both parts operate across -40°C to 85°C junction temperature range, supporting identical thermal performance requirements.

Q: Do both parts have the same regulatory compliance status?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 moisture sensitivity rating with unlimited shelf life.