Switchcraft N114BPC Equivalent & Substitute Parts

Part Overview

The Switchcraft N114BPC is a 6.35mm (0.250", 1/4") stereo headphone jack connector designed for panel mount applications with solder termination. This connector is part of the Hi-D® NL11 series and serves as a standard audio interface component in professional and consumer audio equipment. The part is currently active in production with 663 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

N114BPC

Switchcraft Inc.In Stock: 673N114BPC Datasheet

Current PartRFQ

N114BPCX

Switchcraft Inc.In Stock: 1591N114BPCX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Switchcraft N114BPC is determined by strict equivalence across the following critical parameters:

• Connector type: Phone Jack (Female)
• Signal configuration: Stereo (3 Conductor, TRS)
• Mating diameter: 6.35mm (0.250", 1/4")
• Contact count: 3 Conductors, 5 Contacts
• Mounting configuration: Panel Mount, Through Hole
• Termination method: Solder
• Electrical ratings: 48VDC, 250 mA minimum
• Operating temperature range: -20°C ~ 65°C minimum
• Compliance: ROHS3 Compliant, REACH Unaffected

The N114BPCX is classified as a direct substitute based on identical specifications across all critical parameters. The primary distinction is packaging format: N114BPC is supplied in standard packaging, while N114BPCX is supplied in bulk packaging. Both parts are manufactured by Switchcraft Inc. within the Hi-D® NL11 series and maintain full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the N114BPC and N114BPCX are active production parts manufactured by Switchcraft Inc. and maintain full compliance with ROHS3 and REACH requirements. Selection between these parts should be based on packaging and inventory requirements:

The N114BPC is suitable for standard procurement workflows and applications requiring conventional packaging formats. The N114BPCX offers bulk packaging and higher inventory availability (1544 units versus 663 units), making it appropriate for high-volume production runs or applications where bulk packaging aligns with assembly processes.

Both parts are electrically and mechanically identical and are fully interchangeable in all applications requiring a 6.35mm stereo phone jack with panel mount solder termination, 48VDC rating, and 250 mA current capacity.

Frequently Asked Questions (FAQ)

Q: Are the N114BPC and N114BPCX fully interchangeable?

A: Yes. Both parts are identical in all electrical and mechanical specifications, including connector type, signal configuration, mating diameter, contact count, mounting type, termination method, and electrical ratings. The only difference is packaging format.

Q: What determines compatibility for substitution?

A: Compatibility is determined by matching the connector type (Phone Jack, Female), signal configuration (Stereo TRS), mating diameter (6.35mm), contact count (3 Conductors, 5 Contacts), mounting type (Panel Mount, Through Hole), termination method (Solder), and electrical ratings (48VDC, 250 mA).

Q: Does packaging format affect electrical performance?

A: No. Packaging format (standard versus bulk) does not affect electrical or mechanical performance. The choice between packaging formats is based on procurement, inventory management, and assembly process requirements.

Q: Are both parts compliant with environmental regulations?

A: Yes. Both the N114BPC and N114BPCX are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements.

Q: What is the panel hole size requirement for installation?

A: The panel hole size is 0.375" (9.52mm) with a 3/8"-32 thread size for both parts.