Switchcraft N114B Barrel Connector - Equivalent & Substitute Parts

Part Overview

The Switchcraft N114B is a 6.35mm (0.250", 1/4") stereo headphone jack connector designed for panel mount applications. This female connector features three conductors (TRS configuration) with solder eyelet termination, commonly used in audio equipment, musical instruments, and professional audio systems. The N114B belongs to the Hi-D® NL11 series and is currently in active production with 1075 units available in new original stock.

Identifying equivalent and substitute parts is necessary when the primary part number is unavailable, when bulk packaging is required, or when alternative sourcing from the same manufacturer is needed to meet project timelines and inventory requirements.

Substiute Parts

N114B

Switchcraft Inc.In Stock: 1172N114B Datasheet

Current PartRFQ

N114BX

Switchcraft Inc.In Stock: 8023N114BX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The N114B and its substitute N114BX are functionally equivalent based on the following critical parameters that determine substitutability:

• Connector Type & Gender: Both are female phone jacks
• Signal Configuration: Both support stereo (3 Conductor, TRS) audio signals
• Mating Diameter: Both accept 6.35mm (0.250", 1/4") plugs
• Contact Count: Both provide 3 conductors with 5 total contacts
• Mounting Configuration: Both are panel mount, through-hole designs
• Termination: Both use solder eyelet(s) for circuit board attachment
• Electrical Ratings: Both rated for 48VDC and 250 mA
• Temperature Range: Both operate across -20°C ~ 65°C
• Compliance: Both are ROHS3 compliant

The primary difference between N114B and N114BX is packaging format (standard vs. bulk) and series designation (Hi-D® NL11 vs. N11), with N114BX offering higher inventory availability (7990 units).

Parameter Comparison

Engineering Selection Recommendations

Both the N114B and N114BX are active production parts from Switchcraft Inc. and are fully interchangeable from an electrical and mechanical standpoint. Selection between these parts should be based on:

Inventory Availability: N114BX offers significantly higher stock levels (7990 units vs. 1075 units), making it the preferred choice for projects requiring immediate fulfillment or bulk quantities.

Packaging Requirements: N114B is supplied in standard packaging, while N114BX is supplied in bulk packaging. Bulk packaging is suitable for high-volume manufacturing and assembly operations.

Compliance Certification: Both parts meet ROHS3 compliance and REACH unaffected status, satisfying environmental and regulatory requirements for commercial and industrial applications.

Series Designation: N114B belongs to the Hi-D® NL11 series, while N114BX belongs to the N11 series. Both series share identical electrical and mechanical specifications for this connector type.

Frequently Asked Questions (FAQ)

Q: Can N114BX be used as a direct replacement for N114B?

A: Yes. Both connectors are electrically and mechanically identical. They share the same mating diameter (6.35mm), contact configuration (3 conductors, TRS), electrical ratings (48VDC, 250 mA), and mounting specifications (panel mount, through-hole, solder eyelet termination).

Q: What is the difference between N114B and N114BX?

A: The primary differences are packaging format and series designation. N114B uses standard packaging and belongs to the Hi-D® NL11 series. N114BX uses bulk packaging and belongs to the N11 series. Functionally, they are identical.

Q: Are there any compatibility concerns when substituting N114BX for N114B?

A: No compatibility concerns exist. Both connectors have identical panel hole size (0.375", 9.52mm), thread size (3/8"-32), contact materials (brass with tin plating), and housing materials (polyester, glass filled). They are pin-for-pin and mechanically compatible.

Q: Which part should I select for high-volume production?

A: N114BX is recommended for high-volume production due to bulk packaging and higher inventory availability (7990 units). Bulk packaging reduces handling and storage overhead in manufacturing environments.

Q: Do both parts meet environmental compliance standards?

A: Yes. Both N114B and N114BX are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for commercial, industrial, and consumer applications.

Q: What is the panel mounting configuration for these connectors?

A: Both connectors are panel mount, through-hole designs. They require a 0.375" (9.52mm) panel hole and use a 3/8"-32 thread for secure fastening. Each connector includes mounting hardware (nut and washer) for panel installation.