N112BPC Equivalent & Substitute Parts

Part Overview

The N112BPC is a 6.35mm (0.250", 1/4") stereo headphone jack connector manufactured by Switchcraft Inc., part of the Hi-D® NL11 series. This panel-mount, through-hole solder connector features three conductors (TRS configuration) and is designed for audio applications requiring reliable stereo signal transmission. The part is currently in active production with 937 units available in new original stock.

Finding equivalent and substitute parts is necessary to ensure supply chain continuity, manage inventory across multiple procurement channels, and maintain design flexibility when the primary part number becomes unavailable or when bulk packaging options are preferred.

Substiute Parts

N112BPC

Switchcraft Inc.In Stock: 1008N112BPC Datasheet

Current PartRFQ

N112BPCX

Switchcraft Inc.In Stock: 4818N112BPCX Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The N112BPC has one direct substitute part: N112BPCX. This substitution is valid based on the following critical parameters that remain identical between both parts:

• Connector type: Phone Jack (Stereo, Female)
• Signal configuration: 3 Conductor TRS (Stereo)
• Mating diameter: 6.35mm (0.250", 1/4")
• Number of contacts: 3 Conductors, 3 Contacts
• Mounting type: Panel Mount, Through Hole
• Termination method: Solder
• Shielding: Unshielded
• Operating temperature range: -20°C ~ 65°C
• Voltage rating: 48VDC
• Current rating: 250 mA
• Contact plating: Tin
• Housing material: Polyester, Glass Filled
• Contact material: Brass
• Panel hole size: 0.375" (9.52mm)
• Thread size: 3/8"-32
• RoHS compliance: ROHS3 Compliant

The primary difference between N112BPC and N112BPCX is packaging: N112BPC is supplied in standard packaging, while N112BPCX is supplied in bulk packaging. Both parts are manufactured by Switchcraft Inc. and belong to the Hi-D® series (NL11 and N11 variants respectively). Both parts are active products with confirmed inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both N112BPC and N112BPCX are active products manufactured by Switchcraft Inc. and maintain full ROHS3 compliance. Selection between these parts should be based on packaging and inventory requirements:

Select N112BPC when standard packaging is required or when smaller order quantities are needed. This part number is suitable for applications where packaging specifications are defined in procurement standards.

Select N112BPCX when bulk packaging is acceptable and larger quantities are required. The significantly higher inventory level (4764 units versus 937 units) makes N112BPCX advantageous for high-volume production runs or when supply chain redundancy is a priority.

Both parts are electrically and mechanically identical, ensuring seamless interchangeability in circuit designs and PCB layouts. No design modifications are required when substituting between these part numbers.

Frequently Asked Questions (FAQ)

Q: Are N112BPC and N112BPCX electrically identical?

A: Yes. Both parts feature identical electrical specifications including 48VDC voltage rating, 250 mA current rating, tin-plated brass contacts, and unshielded 3-conductor TRS configuration. They are fully interchangeable in circuit applications.

Q: What is the only difference between N112BPC and N112BPCX?

A: The primary difference is packaging. N112BPC is supplied in standard packaging, while N112BPCX is supplied in bulk packaging. Both are manufactured by Switchcraft Inc. and are active products.

Q: Can I use N112BPCX as a direct replacement for N112BPC in my design?

A: Yes. N112BPCX is a direct substitute for N112BPC. All mechanical dimensions, mounting specifications, and electrical characteristics are identical. No PCB layout or circuit modifications are required.

Q: Are both parts RoHS compliant?

A: Yes. Both N112BPC and N112BPCX are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which part should I specify for high-volume production?

A: N112BPCX is recommended for high-volume production due to its bulk packaging and significantly higher inventory availability (4764 units). This reduces supply chain risk and supports continuous manufacturing operations.

Q: What are the panel mounting specifications for these connectors?

A: Both connectors require a 0.375" (9.52mm) panel hole and use a 3/8"-32 thread size for panel mounting. The connectors include mounting hardware (nut and washer) and feature thread lock for secure installation.