N10236-52B2VC Equivalent & Substitute Parts

Part Overview

The N10236-52B2VC is a 36-position receptacle connector from 3M's 102 Mini D Ribbon (MDR) series, configured for panel mount through-hole right-angle solder termination. This connector features outer shroud contacts, board lock, and shielding with gold-plated contacts. The part is currently obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

N10236-52B2VC

3MIn Stock: 758N10236-52B2VC Datasheet

Current PartRFQ

N10236-52B2PC

3MIn Stock: 1140N10236-52B2PC Datasheet

DirectRFQ

1-5917738-5

TE Connectivity AMP ConnectorsIn Stock: 9531-5917738-5 Datasheet

MFR RecommendedRFQ

DX10M-36S(50)

Hirose Electric Co LtdIn Stock: 1246DX10M-36S(50) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the N10236-52B2VC is determined by strict alignment across the following parameters:

• Connector Type & Position Count: All substitutes must be 36-position receptacle connectors
• Mounting Configuration: Panel mount, through-hole, right-angle orientation required
• Termination Method: Solder termination only
• Electrical Interface: Outer shroud contacts with 2-row configuration
• Physical Compatibility: Housing/Shell flange feature (M2.6) or equivalent mating interface
• Environmental Rating: Moisture Sensitivity Level 1 (Unlimited)

The identified substitutes meet these core electrical and mechanical parameters. Variations in contact finish thickness, series designation, and feature sets (such as shielding or board lock presence) represent acceptable engineering tolerances within the D-Sub connector category.

Parameter Comparison

Engineering Selection Recommendations

N10236-52B2PC (3M): Direct manufacturer equivalent within the same 102 MDR series. Identical electrical and mechanical specifications with active product status and RoHS compliance. Recommended as primary substitute for legacy system replacements requiring minimal design modification.

1-5917738-5 (TE Connectivity AMP Connectors): Cross-manufacturer alternative from the CHAMP .050 II series. Meets all core substitution parameters with ROHS3 compliance and active availability. Contact finish thickness is reduced compared to the original specification but remains within acceptable engineering tolerances for D-Sub connector applications.

DX10M-36S(50) (Hirose Electric Co Ltd): Alternative from the DX Miniature High Density series. Classified as HD (High Density) type with active product status and RoHS compliance. Flange feature designation differs (Mating Side vs. Housing/Shell) but maintains M2.6 mechanical compatibility. Includes latchblock feature not present in original design.

All three substitutes maintain identical position count, row configuration, mounting orientation, and termination method. Selection should prioritize product availability, supply chain continuity, and compliance requirements for the target application.

Frequently Asked Questions (FAQ)

Q: Can N10236-52B2PC be used as a direct replacement for N10236-52B2VC?

A: Yes. Both connectors are from 3M's 102 MDR series with identical electrical and mechanical specifications. The primary difference is product status (active vs. obsolete) and RoHS compliance. N10236-52B2PC is the recommended direct substitute.

Q: What are the key differences between the 3M and cross-manufacturer substitutes?

A: The 3M N10236-52B2PC maintains identical series designation and specifications. TE Connectivity 1-5917738-5 and Hirose DX10M-36S(50) are from different connector series but satisfy all core substitution parameters: 36-position receptacle, panel mount right-angle solder termination, and outer shroud contacts. Contact finish thickness varies across all options but remains within acceptable tolerances.

Q: Are there compatibility concerns with the Hirose DX10M-36S(50) due to its HD classification?

A: The Hirose DX10M-36S(50) is classified as Miniature High Density (HD) type. Despite this designation, it maintains the required 36-position, 2-row configuration with panel mount right-angle solder termination. The flange feature (Mating Side M2.6) provides mechanical compatibility with the original specification.

Q: What is the significance of contact finish thickness differences?

A: Contact finish thickness variations (30.0µin, 3.94µin, and 11.8µin across the options) represent acceptable engineering tolerances within D-Sub connector specifications. All options maintain gold plating for corrosion resistance and electrical performance. Selection should be based on application requirements and supply availability rather than finish thickness alone.

Q: Does the presence or absence of shielding affect substitution eligibility?

A: The original N10236-52B2VC includes shielding; the TE Connectivity 1-5917738-5 does not list shielding as a feature. For applications requiring electromagnetic shielding, N10236-52B2PC or DX10M-36S(50) are preferred. For applications without shielding requirements, all substitutes are functionally equivalent.

Q: What packaging formats are available for these substitutes?

A: N10236-52B2PC is supplied in Box packaging. DX10M-36S(50) is supplied in Tray packaging. TE Connectivity 1-5917738-5 packaging is not specified. Packaging selection should align with procurement and assembly process requirements.