MY2IN-GS AC12 Equivalent & Substitute Parts

Part Overview

The MY2IN-GS AC12 is a general purpose relay manufactured by Omron Automation and Safety. This component is classified as a relay coil with DPDT (2 Form C) contact configuration and 12VAC coil voltage. The part is currently listed as obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations. Substitute parts must maintain electrical and mechanical compatibility with the original specification to ensure proper circuit operation.

Substiute Parts

MY2IN-GS AC12

Omron Automation and SafetyIn Stock: 855MY2IN-GS AC12 Datasheet

Current PartRFQ

MY2IN-GS-R AC12

Omron Automation and SafetyIn Stock: 1191MY2IN-GS-R AC12 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MY2IN-GS AC12 is based on the following critical parameters that must remain constant:

• Base product number alignment within the MY2IN series
• Coil voltage specification of 12VAC
• Contact configuration as DPDT (2 Form C)
• General purpose relay classification
• Mounting compatibility (socketable configuration)

The MY2IN-GS-R AC12 qualifies as a direct substitute because it maintains all required electrical characteristics and mechanical form factor while offering active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The MY2IN-GS-R AC12 is the designated manufacturer-recommended substitute for the obsolete MY2IN-GS AC12. This substitution is supported by:

• Identical base product number (MY2IN) within the same relay series
• Matching coil voltage (12VAC) and contact configuration (DPDT)
• Active product status ensuring continued availability and supply chain reliability
• Socketable mounting type maintaining mechanical compatibility with existing installations

Selection of the MY2IN-GS-R AC12 eliminates obsolescence risk while preserving functional equivalence in general purpose relay applications.

Frequently Asked Questions (FAQ)

Q: Can the MY2IN-GS-R AC12 be used as a direct replacement for the MY2IN-GS AC12?

A: Yes. Both components share the same base product number, coil voltage (12VAC), and contact configuration (DPDT 2 Form C). The MY2IN-GS-R AC12 is the manufacturer-recommended substitute and maintains electrical and mechanical compatibility.

Q: What is the primary reason for substitution?

A: The MY2IN-GS AC12 is classified as obsolete. The MY2IN-GS-R AC12 provides an active, readily available alternative with equivalent specifications.

Q: Are there packaging differences between these parts?

A: The MY2IN-GS AC12 is listed with dash packaging notation, while the MY2IN-GS-R AC12 is supplied in bulk packaging. Both maintain the same socketable mounting configuration.

Q: What are the critical electrical parameters for this substitution?

A: The critical parameters are coil voltage (12VAC), contact form (DPDT), and relay type (general purpose). The MY2IN-GS-R AC12 maintains all three specifications.

Q: Is the MY2IN-GS-R AC12 suitable for new designs?

A: Yes. The active product status and full technical specification documentation make the MY2IN-GS-R AC12 appropriate for both replacement and new design applications.