MX6SWT-H1-0000-000EB2 Equivalent & Substitute Parts

Part Overview

The MX6SWT-H1-0000-000EB2 is an XLamp® MX-6S white LED in 2-SMD, Gull Wing surface mount packaging. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing design support and production continuity. The part delivers 118 lm at 60mA forward current with a 20V typical forward voltage and 120° viewing angle. Substitution becomes necessary when original inventory is depleted or when transitioning to active product lines.

Substiute Parts

MX6SWT-H1-0000-000EB2

CreeLED, Inc.In Stock: 765MX6SWT-H1-0000-000EB2 Datasheet

Current PartRFQ

MX6AWT-H1-0000-000CB2

CreeLED, Inc.In Stock: 1175MX6AWT-H1-0000-000CB2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MX6SWT-H1-0000-000EB2 is based on the following criteria:

Mechanical Compatibility:

• Identical package type: 2-SMD, Gull Wing
• Identical footprint dimensions: 5.00 mm × 5.00 mm
• Identical seated height: 1.48 mm
• Identical thermal resistance: 5°C/W

Optical Compatibility:

• Color: White
• Viewing angle: 120°

Electrical Compatibility:

• Forward voltage and current characteristics must be evaluated for circuit redesign requirements
• Maximum current ratings must support intended application

The MX6AWT-H1-0000-000CB2 meets all mechanical and optical compatibility criteria. However, this substitute operates at significantly different electrical parameters (3.3V, 300mA test current versus 20V, 60mA), requiring circuit-level modifications for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The MX6AWT-H1-0000-000CB2 provides mechanical and optical compatibility with the obsolete MX6SWT-H1-0000-000EB2. The substitute part is active in production status and carries RoHS compliance certification, supporting long-term supply chain stability.

Direct pin-for-pin substitution is not feasible due to fundamental electrical parameter differences. The MX6AWT operates at 3.3V typical forward voltage with 300mA test current, compared to the original part's 20V and 60mA specifications. Circuit redesign is required to accommodate the different voltage and current requirements of the substitute part.

The MX6AWT-H1-0000-000CB2 features an exposed pad variant of the 2-SMD, Gull Wing package, which may provide improved thermal performance in applications requiring enhanced heat dissipation.

Frequently Asked Questions (FAQ)

Q: Can the MX6AWT-H1-0000-000CB2 be used as a direct replacement without circuit modification?

A: No. The MX6AWT operates at 3.3V forward voltage with 300mA test current, while the original MX6SWT requires 20V at 60mA. Circuit-level modifications to voltage regulation and current limiting are necessary.

Q: Are the mechanical footprints identical between these parts?

A: Yes. Both parts use 5.00 mm × 5.00 mm 2-SMD, Gull Wing packaging with 1.48 mm seated height, allowing PCB layout reuse. The MX6AWT includes an exposed pad variant, which is a mechanical enhancement.

Q: What is the difference between the standard Gull Wing and Gull Wing Exposed Pad packages?

A: The exposed pad variant provides an additional thermal connection point on the package underside, improving heat transfer to the PCB. This is beneficial in high-power or thermally constrained applications.

Q: Does the MX6AWT-H1-0000-000CB2 meet RoHS compliance?

A: Yes. The MX6AWT is RoHS compliant, whereas RoHS status for the original MX6SWT is not specified in available documentation.

Q: What is the optical performance difference between these parts?

A: Both parts emit white light with 120° viewing angle. The MX6AWT delivers 104 lm at its test current (300mA) with 105 lm/W efficiency, compared to the MX6SWT's 118 lm at 60mA with 98 lm/W efficiency. Absolute flux output depends on the specific operating current selected in the redesigned circuit.

Q: Are moisture sensitivity levels the same?

A: Yes. Both parts carry MSL 2A (4 Weeks) classification, requiring identical handling and storage protocols.