MX6SWT-H1-0000-000DZ7 Equivalent & Substitute Parts

Part Overview

The MX6SWT-H1-0000-000DZ7 is a Cree XLamp® MX-6S warm white LED (3000K) designed for surface mount applications. This component delivers 111 lumens at 25°C under 60mA test current with a forward voltage of 20V and 120° viewing angle. The product is classified as obsolete, making identification of compatible substitute parts essential for ongoing production and maintenance applications.

Substiute Parts

MX6SWT-H1-0000-000DZ7

CreeLED, Inc.In Stock: 1171MX6SWT-H1-0000-000DZ7 Datasheet

Current PartRFQ

MX6AWT-H1-0000-000BZ7

CreeLED, Inc.In Stock: 1014MX6AWT-H1-0000-000BZ7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The MX6AWT-H1-0000-000BZ7 qualifies as a substitute based on the following alignment of critical parameters:

Matching Parameters:

• Color and CCT: Both White, Warm 3000K
• Viewing Angle: Both 120°
• Mounting Type: Both Surface Mount
• Package Footprint: Both 2-SMD, Gull Wing (5.00 mm × 5.00 mm)
• Height: Both 1.48 mm maximum seated height
• Thermal Resistance: Both 5°C/W
• MSL Rating: Both 2A (4 Weeks)
• REACH Status: Both REACH Unaffected
• ECCN Classification: Both EAR99

Differing Parameters: The substitute operates at significantly different electrical specifications (3.3V forward voltage, 300 mA test current) compared to the main part (20V, 60 mA). These differences require circuit-level evaluation for compatibility.

Parameter Comparison

Engineering Selection Recommendations

The MX6AWT-H1-0000-000BZ7 is the active production equivalent for the obsolete MX6SWT-H1-0000-000DZ7. Both components share identical mechanical footprints, thermal characteristics, and environmental compliance ratings (REACH Unaffected, EAR99 classification).

The substitute part carries RoHS Compliance certification, whereas the main part does not specify RoHS status. This represents an advantage for applications subject to RoHS requirements.

Electrical parameter differences (forward voltage and test current) are inherent to the design evolution between the MX-6S and MX-6 series. The substitute delivers comparable luminous efficacy (98 lm/W versus 93 lm/W) despite lower absolute flux output at its rated test current. Circuit design must accommodate the 3.3V operating voltage and higher current capability (1 A maximum) of the substitute.

Frequently Asked Questions (FAQ)

Q: Can the MX6AWT-H1-0000-000BZ7 be used as a direct drop-in replacement for the MX6SWT-H1-0000-000DZ7?

A: Mechanical compatibility is confirmed. Both components use identical 5.00 mm × 5.00 mm 2-SMD Gull Wing packages with 1.48 mm maximum seated height. Electrical compatibility requires circuit redesign due to the 20V-to-3.3V forward voltage difference and 60 mA-to-300 mA test current difference.

Q: What are the key differences between these two parts?

A: The primary differences are forward voltage (20V vs. 3.3V), test current (60 mA vs. 300 mA), maximum current rating (175 mA vs. 1 A), and product status (Obsolete vs. Active). Both maintain identical color temperature (3000K), viewing angle (120°), thermal resistance (5°C/W), and physical dimensions.

Q: Does the substitute part have better compliance certifications?

A: The MX6AWT-H1-0000-000BZ7 specifies RoHS Compliance, whereas the main part does not include RoHS status in its documentation. Both parts are REACH Unaffected and carry EAR99 ECCN classification.

Q: Are there packaging differences between these parts?

A: The main part uses standard 2-SMD Gull Wing packaging. The substitute uses 2-SMD Gull Wing with Exposed Pad. The exposed pad provides enhanced thermal dissipation and is standard in the active MX-6 series design.

Q: What is the luminous flux difference between these parts?

A: At their respective test currents, the MX6SWT-H1-0000-000DZ7 produces 111 lm (60 mA test), while the MX6AWT-H1-0000-000BZ7 produces 97 lm (300 mA test). The substitute achieves higher luminous efficacy (98 lm/W vs. 93 lm/W).