MX6SWT-H1-0000-000DA7 Equivalent & Substitute Parts

Part Overview

The MX6SWT-H1-0000-000DA7 is an XLamp® MX-6S warm white LED (3250K) designed for surface mount applications requiring high color rendering and efficiency. This component operates at 20V forward voltage with a 60mA test current, delivering 111 lumens at 25°C with a CRI of 80. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity.

Substiute Parts

MX6SWT-H1-0000-000DA7

CreeLED, Inc.In Stock: 1080MX6SWT-H1-0000-000DA7 Datasheet

Current PartRFQ

MX6AWT-01-0000-000CA7

CreeLED, Inc.In Stock: 1022MX6AWT-01-0000-000CA7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MX6SWT-H1-0000-000DA7 is determined by the following critical parameters:

• Color and CCT Match: Warm white at 3250K
• Viewing Angle: 120° minimum
• Package Type: 2-SMD, Gull Wing surface mount configuration
• Physical Dimensions: 5.00 mm × 5.00 mm footprint with maximum seated height of 1.48 mm
• Thermal Resistance: 5°C/W
• Moisture Sensitivity: MSL 2A classification
• Regulatory Compliance: REACH Unaffected status

The MX6AWT-01-0000-000CA7 qualifies as a substitute based on matching color temperature, viewing angle, package footprint, physical dimensions, thermal characteristics, and regulatory compliance. However, this substitute operates at significantly different electrical parameters (3.3V forward voltage, 300mA test current) and is from the XLamp® MX-6 series rather than MX-6S, reflecting a different product generation with distinct performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

The MX6AWT-01-0000-000CA7 is the identified substitute for the obsolete MX6SWT-H1-0000-000DA7. Selection of this alternative requires circuit redesign due to fundamental electrical parameter differences:

• Voltage Requirement: The substitute operates at 3.3V versus the original 20V, necessitating complete power supply and current limiting circuit modification.
• Current Handling: Test current increases from 60 mA to 300 mA, requiring updated thermal management and power dissipation analysis.
• Product Status: The substitute is active and currently manufactured, ensuring long-term availability and supply chain continuity.
• Regulatory Compliance: Both parts maintain REACH Unaffected status. The substitute carries RoHS Compliant certification, providing enhanced environmental compliance.
• Packaging Format: The substitute is supplied in Tape & Reel format, suitable for automated assembly processes.
• Photometric Performance: The substitute delivers comparable luminous flux (104 lm versus 111 lm) with improved efficiency (105 lm/W versus 93 lm/W).

Frequently Asked Questions (FAQ)

Q: Can the MX6AWT-01-0000-000CA7 be used as a direct drop-in replacement for the MX6SWT-H1-0000-000DA7?

A: No. While both components share identical physical dimensions, footprint, and thermal characteristics, the electrical parameters differ significantly. The substitute requires 3.3V forward voltage and 300 mA test current compared to the original 20V and 60 mA. Circuit redesign is mandatory.

Q: What are the key mechanical compatibility factors?

A: Both parts feature identical 5.00 mm × 5.00 mm footprints, 1.48 mm maximum seated height, and 2-SMD Gull Wing package configuration. PCB layout and reflow profile compatibility is maintained. The substitute includes an exposed pad variant, which may require updated thermal via design.

Q: How do the photometric characteristics compare?

A: Both components deliver warm white light at 3250K with 120° viewing angle. The original provides 111 lm at 60 mA; the substitute provides 104 lm at 300 mA. The substitute achieves higher efficiency at 105 lm/W versus 93 lm/W. CRI data is specified for the original (80) but not provided for the substitute.

Q: What is the impact of the different series designation (MX-6S versus MX-6)?

A: The MX-6S and MX-6 represent different product generations from the XLamp® family. The MX-6 (substitute) is the current active product line, while the MX-6S (original) is obsolete. This reflects generational advancement in LED technology and manufacturing processes.

Q: Are there packaging or supply chain differences?

A: The original is supplied in bulk packaging; the substitute is supplied in Tape & Reel format. This difference supports automated assembly workflows and is standard for active production components.

Q: What regulatory certifications apply?

A: Both components maintain REACH Unaffected status. The substitute carries RoHS Compliant certification, providing enhanced environmental compliance for regulated markets.