MX6SWT-H1-0000-000CF7 Equivalent & Substitute Parts

Part Overview

The MX6SWT-H1-0000-000CF7 is an XLamp® MX-6S warm white LED (3200K) designed for surface mount applications requiring warm color temperature lighting. This part operates at 20V forward voltage with 60mA test current, delivering 104lm at 25°C with 87 lm/W efficiency and an 80 CRI rating.

The MX6SWT-H1-0000-000CF7 is classified as Obsolete. Locating equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications. The XLamp® MX-6 series provides compatible alternatives with maintained color temperature and viewing angle specifications.

Substiute Parts

MX6SWT-H1-0000-000CF7

CreeLED, Inc.In Stock: 969MX6SWT-H1-0000-000CF7 Datasheet

Current PartRFQ

MX6AWT-H1-0000-000BF7

CreeLED, Inc.In Stock: 1210MX6AWT-H1-0000-000BF7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The MX6AWT-H1-0000-000BF7 qualifies as a substitute based on the following matching parameters:

• Color and CCT: Both parts deliver White, Warm 3200K output
• Viewing Angle: Both maintain 120° viewing angle
• Package Footprint: Both use 2-SMD, Gull Wing surface mount configuration
• Physical Dimensions: Both measure 5.00mm x 5.00mm with 1.48mm maximum seated height
• Thermal Resistance: Both specify 5°C/W package thermal resistance
• Moisture Sensitivity: Both rated MSL 2A (4 Weeks)
• Compliance: Both REACH Unaffected and EAR99 classified

The MX6AWT-H1-0000-000BF7 operates at different electrical parameters (3.3V forward voltage, 300mA test current) and represents an active product status, making it suitable for applications where the electrical characteristics can be accommodated in the circuit design.

Parameter Comparison

Engineering Selection Recommendations

The MX6AWT-H1-0000-000BF7 is the designated substitute for the obsolete MX6SWT-H1-0000-000CF7. Selection of this substitute requires circuit-level evaluation due to significant electrical parameter differences:

• The substitute operates at 3.3V forward voltage versus 20V on the original part, requiring redesign of the LED drive circuit and current limiting resistor values
• Test current increases from 60mA to 300mA, necessitating verification of PCB trace current capacity and thermal management
• Luminous flux output decreases from 104lm to 97lm, a 7% reduction that may impact application brightness requirements
• The substitute features an exposed pad variant of the 2-SMD Gull Wing package, which may require PCB layout modifications for thermal management
• The substitute carries Active product status and RoHS Compliant certification, providing long-term availability and regulatory compliance advantages over the Obsolete original part

Both parts maintain identical color temperature (3200K), CRI (80), viewing angle (120°), physical footprint (5.00mm x 5.00mm), and thermal resistance (5°C/W), supporting mechanical and optical compatibility.

Frequently Asked Questions (FAQ)

Q: Can the MX6AWT-H1-0000-000BF7 be used as a direct drop-in replacement for the MX6SWT-H1-0000-000CF7?

A: No. While both parts share identical physical dimensions, footprint, color temperature, and viewing angle, the electrical parameters differ significantly. The substitute requires 3.3V forward voltage and 300mA test current compared to 20V and 60mA on the original part. Circuit redesign is necessary to accommodate these differences.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: color and CCT (3200K), viewing angle (120°), package type (2-SMD Gull Wing), physical dimensions (5.00mm x 5.00mm), seated height (1.48mm), thermal resistance (5°C/W), and moisture sensitivity level (2A, 4 Weeks). Electrical parameters (forward voltage and test current) are application-dependent and do not prevent substitution if the circuit can be redesigned.

Q: What is the difference between the 2-SMD Gull Wing and 2-SMD Gull Wing Exposed Pad packages?

A: The substitute part features an exposed pad variant, which provides enhanced thermal dissipation through direct contact with the PCB. This may require PCB layout modifications to include a thermal pad beneath the component. The original part uses standard Gull Wing configuration without an exposed pad.

Q: Why is the substitute part listed as Active while the original is Obsolete?

A: The MX6AWT-H1-0000-000BF7 represents a current-generation XLamp® MX-6 product with ongoing manufacturing and availability. The MX6SWT-H1-0000-000CF7 has been discontinued and is no longer produced. Using the Active substitute ensures long-term component availability and access to current manufacturing quality standards.

Q: Are there compliance or regulatory differences between these parts?

A: The substitute carries RoHS Compliant certification, while the original part does not specify RoHS status. Both parts are REACH Unaffected and EAR99 classified. For applications requiring RoHS compliance, the substitute provides explicit regulatory certification.