MX6SWT-A1-0000-000F53 Equivalent & Substitute Parts

Part Overview

The MX6SWT-A1-0000-000F53 is a CreeLED XLamp® MX-6S cool white LED (6000K) in a 2-SMD Gull Wing surface mount package. This component operates at 20V forward voltage with a 60mA test current, delivering 126 lumens at 25°C and 105 lm/W efficiency. The product is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity.

Substiute Parts

MX6SWT-A1-0000-000F53

CreeLED, Inc.In Stock: 958MX6SWT-A1-0000-000F53 Datasheet

Current PartRFQ

MX6AWT-A1-0000-000E53

CreeLED, Inc.In Stock: 1185MX6AWT-A1-0000-000E53 Datasheet

SimilarRFQ

MX6SWT-A1-R250-000FE3

CreeLED, Inc.In Stock: 882MX6SWT-A1-R250-000FE3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MX6SWT-A1-0000-000F53 is determined by the following critical parameters:

Electrical Compatibility Requirements:

• Color and CCT (Correlated Color Temperature): Must be White, Cool 6000K or 5000K
• Voltage - Forward (Vf): Must operate at 20V typical
• Current - Test: Must be 60mA
• Current - Maximum: Must support 175mA
• Lumens/Watt efficiency: Must be 105 lm/W or greater
• CRI: Must be 75 or higher

Mechanical & Thermal Compatibility Requirements:

• Mounting Type: Surface Mount only
• Package / Case: 2-SMD, Gull Wing configuration
• Size / Dimension: 5.00mm x 5.00mm
• Height - Seated (Max): 1.48mm
• Thermal Resistance: 5°C/W

Environmental & Compliance Requirements:

• Moisture Sensitivity Level (MSL): 2A (4 Weeks)
• REACH Status: REACH Unaffected
• ECCN: EAR99

The following parts meet these criteria:

Parametric Equivalent: MX6SWT-A1-R250-000FE3 (same series, same electrical specifications, CCT variation 5000K)

Similar Substitute: MX6AWT-A1-0000-000E53 (different series with different electrical specifications; requires circuit redesign)

Parameter Comparison

Engineering Selection Recommendations

MX6SWT-A1-R250-000FE3 (Parametric Equivalent - Recommended for Direct Substitution)

This part is the primary equivalent for the MX6SWT-A1-0000-000F53. Both components share identical electrical specifications (20V Vf, 60mA test current, 175mA maximum current, 105 lm/W efficiency) and mechanical form factor (5.00mm x 5.00mm, 1.48mm height, 2-SMD Gull Wing). The only difference is the CCT specification: 5000K versus 6000K. Both are classified as obsolete products. Packaging differs (Cut Tape & Digi-Reel® versus standard packaging), but this does not affect electrical or thermal performance. This part is suitable for direct circuit substitution without design modification.

MX6AWT-A1-0000-000E53 (Similar Substitute - Requires Circuit Redesign)

This part belongs to the XLamp® MX-6 series and differs significantly in electrical specifications. The forward voltage is 3.3V (versus 20V), the test current is 300mA (versus 60mA), and the maximum current is 1A (versus 175mA). While the flux output is comparable (118lm versus 126lm), the efficiency is higher (119 lm/W versus 105 lm/W). The package configuration includes an exposed pad, which may require PCB layout modifications. This part is active and RoHS compliant. Substitution requires complete circuit redesign and is not recommended for direct replacement without engineering review.

Frequently Asked Questions (FAQ)

Q: Can MX6SWT-A1-R250-000FE3 be used as a direct replacement for MX6SWT-A1-0000-000F53?

A: Yes. Both parts operate at identical electrical specifications (20V Vf, 60mA test current, 175mA maximum current) and share the same mechanical form factor (5.00mm x 5.00mm, 1.48mm height, 2-SMD Gull Wing). The CCT difference (5000K versus 6000K) represents a minor color temperature shift within the cool white spectrum. No circuit modification is required.

Q: What is the difference between the 2-SMD Gull Wing and 2-SMD Gull Wing Exposed Pad packages?

A: The exposed pad variant (MX6AWT-A1-0000-000E53) includes an additional thermal pad on the bottom of the component for improved heat dissipation. This requires different PCB footprint design and solder reflow procedures. The standard Gull Wing package (MX6SWT-A1-0000-000F53 and MX6SWT-A1-R250-000FE3) does not include this feature.

Q: Why is MX6AWT-A1-0000-000E53 not recommended as a direct substitute?

A: The MX6AWT-A1-0000-000E53 operates at fundamentally different electrical specifications: 3.3V forward voltage and 300mA test current, compared to 20V and 60mA for the MX6SWT-A1-0000-000F53. These differences require complete circuit redesign, including power supply modifications, current limiting resistor changes, and PCB layout adjustments. Direct substitution without circuit modification will result in component failure.

Q: Are there any compliance or environmental differences between these parts?

A: All three parts share identical MSL ratings (2A, 4 Weeks), REACH status (REACH Unaffected), and ECCN classification (EAR99). The MX6AWT-A1-0000-000E53 is RoHS compliant, while RoHS status is not specified for the MX6SWT variants. This does not affect substitution eligibility for the MX6SWT-A1-R250-000FE3 equivalent.

Q: What is the significance of the product status (Obsolete vs. Active)?

A: Both the main part (MX6SWT-A1-0000-000F53) and its parametric equivalent (MX6SWT-A1-R250-000FE3) are classified as obsolete. The MX6AWT-A1-0000-000E53 is active. Obsolete status indicates that the manufacturer no longer produces these components, making current inventory the primary source. Active status indicates ongoing production and availability.