MX6SWT-A1-0000-000F50 Equivalent & Substitute Parts

Part Overview

The MX6SWT-A1-0000-000F50 is a CreeLED XLamp® MX-6S cool white LED (6000K) in a 2-SMD Gull Wing surface mount package. This component operates at 20V forward voltage with a 60mA test current, delivering 126 lumens at 25°C and 105 lm/W efficiency. The part is classified as obsolete, making identification of equivalent and substitute components essential for ongoing design support and production continuity.

Substiute Parts

MX6SWT-A1-0000-000F50

CreeLED, Inc.In Stock: 913MX6SWT-A1-0000-000F50 Datasheet

Current PartRFQ

MX6AWT-A1-0000-000E50

CreeLED, Inc.In Stock: 804MX6AWT-A1-0000-000E50 Datasheet

SimilarRFQ

MX6SWT-A1-R250-000FE3

CreeLED, Inc.In Stock: 882MX6SWT-A1-R250-000FE3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MX6SWT-A1-0000-000F50 is determined by the following critical parameters:

Mechanical Compatibility:

• Package type: 2-SMD, Gull Wing
• Physical dimensions: 5.00mm x 5.00mm footprint
• Height: 1.48mm maximum seated height
• Mounting type: Surface Mount

Electrical Compatibility:

• Forward voltage (Vf): 20V nominal operation
• Test current: 60mA
• Maximum current rating: 175mA
• Viewing angle: 120°

Optical Compatibility:

• Color: White, Cool
• CCT: 6000K
• CRI: 75 (Typ)
• Flux output: 126lm nominal at test conditions

Environmental & Compliance:

• Moisture Sensitivity Level: 2A (4 Weeks)
• REACH Status: REACH Unaffected
• ECCN: EAR99

Substitute parts must maintain compatibility across all mechanical, electrical, and optical parameters. Deviations in forward voltage, current ratings, or package dimensions render a part unsuitable for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

MX6AWT-A1-0000-000E50 (XLamp® MX-6 Series): This part is not a direct substitute for the MX6SWT-A1-0000-000F50. The MX6AWT operates at 3.3V forward voltage with a 300mA test current, fundamentally different from the 20V/60mA specification of the main part. The package includes an exposed pad variant, and the series designation (MX-6 vs. MX-6S) indicates a different LED architecture. While both maintain 120° viewing angle, 6000K color temperature, and 75 CRI, the electrical incompatibility precludes direct substitution. This part is currently active in production status.

MX6SWT-A1-R250-000FE3 (XLamp® MX-6S Series, 5000K): This part is a parametric equivalent with the same series (MX-6S), identical electrical specifications (20V/60mA), and matching mechanical package (2-SMD Gull Wing, 5.00mm x 5.00mm, 1.48mm height). The primary difference is the correlated color temperature: 5000K versus 6000K. Both parts deliver 126lm at test conditions with 105 lm/W efficiency and 75 CRI. The packaging format differs (Cut Tape & Digi-Reel® versus standard), and both are classified as obsolete. Selection between these parts depends on color temperature requirements for the application.

Frequently Asked Questions (FAQ)

Q: Can MX6AWT-A1-0000-000E50 replace MX6SWT-A1-0000-000F50 in existing designs?

A: No. The MX6AWT operates at 3.3V forward voltage with 300mA test current, while the MX6SWT-A1-0000-000F50 requires 20V at 60mA. Direct substitution would result in circuit malfunction or component damage. These parts require different power supply architectures and cannot be interchanged without complete circuit redesign.

Q: What is the difference between MX6SWT-A1-0000-000F50 and MX6SWT-A1-R250-000FE3?

A: Both parts share identical electrical specifications (20V forward voltage, 60mA test current, 175mA maximum), mechanical package (2-SMD Gull Wing, 5.00mm x 5.00mm), and optical output (126lm, 105 lm/W, 75 CRI). The primary distinction is correlated color temperature: MX6SWT-A1-0000-000F50 operates at 6000K (cool white), while MX6SWT-A1-R250-000FE3 operates at 5000K (neutral white). Packaging format also differs: standard versus Cut Tape & Digi-Reel®. Selection depends on color temperature requirements.

Q: Are there mechanical compatibility concerns with substitute parts?

A: All listed parts maintain identical mechanical specifications: 5.00mm x 5.00mm footprint, 1.48mm maximum seated height, 2-SMD Gull Wing package, and 5°C/W thermal resistance. PCB layout and reflow profiles remain compatible. The MX6AWT-A1-0000-000E50 includes an exposed pad variant, which may require modified thermal management considerations but maintains footprint compatibility.

Q: What is the product status significance for these parts?

A: MX6SWT-A1-0000-000F50 and MX6SWT-A1-R250-000FE3 are both classified as obsolete, indicating discontinued production. MX6AWT-A1-0000-000E50 is active in production. For long-term design support, the active status of MX6AWT-A1-0000-000E50 provides supply continuity, though electrical incompatibility prevents direct substitution. Designs requiring 20V operation must rely on obsolete MX-6S variants or pursue alternative LED architectures.

Q: Are moisture sensitivity and compliance ratings identical across all parts?

A: Yes. All three parts maintain MSL 2A (4 Weeks), REACH Unaffected status, and EAR99 ECCN classification. Storage and handling requirements are equivalent across all parts.