MX6SWT-A1-0000-000BZ6 Equivalent & Substitute Parts

Part Overview

The MX6SWT-A1-0000-000BZ6 is an XLamp® MX-6S warm white LED (3500K) designed for surface mount applications requiring 20V forward voltage at 60mA test current. This part is classified as obsolete, making identification of suitable substitutes essential for ongoing production and maintenance applications. The XLamp® MX-6S series delivers 97lm at 25°C with a color rendering index of 80, suitable for general illumination requiring warm white color temperature.

Substiute Parts

MX6SWT-A1-0000-000BZ6

CreeLED, Inc.In Stock: 768MX6SWT-A1-0000-000BZ6 Datasheet

Current PartRFQ

MX6AWT-A1-0000-000BZ6

CreeLED, Inc.In Stock: 769MX6AWT-A1-0000-000BZ6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MX6SWT-A1-0000-000BZ6 is determined by the following critical parameters:

Electrical Compatibility Parameters:

• Color temperature (CCT): 3500K warm white
• Color Rendering Index (CRI): 80 (Typ)
• Viewing angle: 120°
• Thermal resistance: 5°C/W
• Mounting type: Surface mount
• Physical dimensions: 5.00mm x 5.00mm footprint
• Package type: 2-SMD, Gull Wing configuration

Substitution Constraint: The MX6AWT-A1-0000-000BZ6 shares identical color temperature, CRI, viewing angle, thermal resistance, physical dimensions, and mounting characteristics. However, this substitute operates at significantly different electrical parameters (3.3V forward voltage vs. 20V, and 300mA test current vs. 60mA). Substitution is valid only when the application circuit can accommodate the different voltage and current requirements.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The MX6SWT-A1-0000-000BZ6 is obsolete, while the MX6AWT-A1-0000-000BZ6 is active. For new designs or ongoing production requiring warm white 3500K LEDs with 120° viewing angle and 5°C/W thermal resistance, the active MX6AWT-A1-0000-000BZ6 is the appropriate selection.

Compliance Advantage: The MX6AWT-A1-0000-000BZ6 carries RoHS Compliant certification, whereas RoHS status is not specified for the obsolete MX6SWT-A1-0000-000BZ6. Both parts maintain REACH Unaffected status.

Electrical Circuit Requirements: Selection between these parts depends entirely on circuit design. The MX6SWT-A1-0000-000BZ6 requires 20V forward voltage with 60mA test current, while the MX6AWT-A1-0000-000BZ6 requires 3.3V forward voltage with 300mA test current. Existing designs must be evaluated for voltage and current compatibility before substitution.

Frequently Asked Questions (FAQ)

Q: Can the MX6AWT-A1-0000-000BZ6 directly replace the MX6SWT-A1-0000-000BZ6 in existing designs?

A: Direct replacement is not possible without circuit modification. The MX6AWT-A1-0000-000BZ6 operates at 3.3V forward voltage compared to the MX6SWT-A1-0000-000BZ6's 20V. The test current differs from 60mA to 300mA. Circuit redesign is required to accommodate these electrical differences.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts share identical footprint dimensions (5.00mm x 5.00mm) and maximum seated height (1.48mm). However, the MX6AWT-A1-0000-000BZ6 features an exposed pad in its 2-SMD Gull Wing package, while the MX6SWT-A1-0000-000BZ6 does not. PCB layout may require adjustment for thermal management via the exposed pad.

Q: Do both parts produce the same light output?

A: Both parts deliver 97lm at 25°C under their respective test currents. The MX6AWT-A1-0000-000BZ6 achieves higher efficiency at 98 lm/W compared to 81 lm/W for the MX6SWT-A1-0000-000BZ6.

Q: What is the significance of the MX6AWT-A1-0000-000BZ6 being RoHS Compliant?

A: RoHS Compliance indicates the MX6AWT-A1-0000-000BZ6 meets Restriction of Hazardous Substances regulations, making it suitable for applications with environmental compliance requirements. The MX6SWT-A1-0000-000BZ6 RoHS status is not specified.

Q: Are moisture sensitivity levels the same?

A: Yes. Both parts carry MSL 2A (4 Weeks) rating, requiring identical moisture control and storage protocols.