MVY35VC101MH10TP Equivalent & Substitute Parts

Part Overview

The MVY35VC101MH10TP is a 100 µF, 35 V aluminum electrolytic capacitor manufactured by Chemi-Con in surface mount radial can package. This component is classified as obsolete, with a rated lifetime of 2000 hours at 105°C and general-purpose applications. Due to its obsolete status and limited availability in new production, equivalent and substitute parts from active manufacturers are necessary for ongoing design support and production continuity.

Key Parameters

Parameter	Value
Capacitance	100 µF
Tolerance	±20%
Voltage Rating	35 V
Lifetime @ 105°C	2000 Hrs
Operating Temperature Range	-55°C to 105°C
Polarization	Polar
Package Type	Radial, Can - SMD
Size / Dimension	0.315" Dia (8.00mm)
Height - Seated (Max)	0.394" (10.00mm)
Surface Mount Land Size	0.327" L x 0.327" W (8.30mm x 8.30mm)
Mounting Type	Surface Mount
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MVY35VC101MH10TP is determined by the following critical parameters:

Primary Substitution Criteria:

Capacitance: 100 µF (exact match required)
Tolerance: ±20% (exact match required)
Voltage Rating: 35 V minimum (equal or higher voltage acceptable)
Operating Temperature Range: -55°C to 105°C (must encompass or match)
Polarization: Polar (exact match required)
Package Type: Radial, Can - SMD (exact match required)
Physical Dimensions: 0.315" Dia (8.00mm), compatible height, 0.327" L x 0.327" W land size (exact match required)
Mounting Type: Surface Mount (exact match required)

Secondary Considerations:

Lifetime @ 105°C: 2000 hours minimum acceptable; higher ratings provide extended service life
Ripple Current Capability: Must support application requirements
Impedance: Lower impedance indicates improved high-frequency performance
RoHS Compliance: Active production parts are ROHS3 compliant; legacy part is non-compliant
Product Status: Active status ensures ongoing availability

Substitutes are grouped into three categories: parametric equivalents (identical electrical and mechanical specifications), upgrades (enhanced performance or compliance), and direct alternatives (different manufacturers, equivalent specifications).

Parameter Comparison

Part Number	Manufacturer	Capacitance	Voltage	Tolerance	Lifetime @ 105°C	Size (Dia)	Height (Max)	Ripple Current @ 100 kHz	Impedance	Product Status	RoHS Status
MVY35VC101MH10TP	Chemi-Con	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.394" (10.00mm)	450 mA	300 mOhms	Obsolete	Non-compliant
EMVY350ARA101MHA0G	Chemi-Con	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.394" (10.00mm)	450 mA	300 mOhms	Active	ROHS3 Compliant
EMZA350ARA101MHA0G	Chemi-Con	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	600 mA	160 mOhms	Active	ROHS3 Compliant
UUX1V101MNL6GS	Nichicon	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	367.9 mA @ 10 kHz	—	Active	ROHS3 Compliant
35JGV100M8X10.5	Rubycon	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	216 mA @ 10 kHz	—	Active	ROHS3 Compliant
35JZV100M8X10.5	Rubycon	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	600 mA	160 mOhms	Active	ROHS3 Compliant
35TKV100M8X10.5	Rubycon	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	850 mA	80 mOhms	Active	ROHS3 Compliant
35TLV100M8X10.5	Rubycon	100 µF	35 V	±20%	5000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	600 mA	160 mOhms	Active	ROHS3 Compliant
35TZV100M8X10.5	Rubycon	100 µF	35 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	600 mA	160 mOhms	Active	ROHS3 Compliant
EMVY500ARA101MHA0G	Chemi-Con	100 µF	50 V	±20%	2000 Hrs	0.315" (8.00mm)	0.394" (10.00mm)	300 mA	600 mOhms	Active	ROHS3 Compliant
50JGV100M8X10.5	Rubycon	100 µF	50 V	±20%	2000 Hrs	0.315" (8.00mm)	0.413" (10.50mm)	276 mA @ 10 kHz	—	Active	ROHS3 Compliant

Engineering Selection Recommendations

Parametric Equivalent (Direct Replacement):

EMVY350ARA101MHA0G is the direct parametric equivalent from Chemi-Con. This part maintains identical electrical specifications (100 µF, 35 V, ±20%, 2000 Hrs @ 105°C) and physical dimensions (0.315" Dia, 0.394" height) as the obsolete MVY35VC101MH10TP. The primary advantage is ROHS3 compliance and active production status, ensuring long-term availability. This part is suitable for direct substitution in applications where the original specifications are required without modification.

Upgraded Alternatives (Same Voltage, Enhanced Performance):

EMZA350ARA101MHA0G, 35JZV100M8X10.5, 35TKV100M8X10.5, 35TLV100M8X10.5, and 35TZV100M8X10.5 provide enhanced performance within the 35 V rating. These parts feature improved ripple current capability (600 mA @ 100 kHz or higher) and lower impedance (80–160 mOhms), supporting higher-frequency applications. EMZA350ARA101MHA0G and the Rubycon TKV/TLV/TZV series carry AEC-Q200 automotive qualification. The 35TLV100M8X10.5 offers extended lifetime (5000 Hrs @ 105°C), suitable for long-life applications. Height differences (0.413" vs. 0.394") must be verified against PCB layout constraints.

Voltage-Upgraded Alternative (Higher Voltage Rating):

EMVY500ARA101MHA0G and 50JGV100M8X10.5 provide 50 V rating with identical 100 µF capacitance. These parts are suitable for applications where higher voltage margin is required or where 50 V circuits are being standardized. Both maintain surface mount compatibility and ROHS3 compliance. The 50 V rating provides additional safety margin in circuits subject to voltage transients.

Direct Manufacturer Alternatives:

UUX1V101MNL6GS (Nichicon) provides equivalent specifications at 35 V with active production status and ROHS3 compliance. This part is suitable for applications where Nichicon qualification is required or preferred.

Selection Criteria:

For direct replacement with no design changes: EMVY350ARA101MHA0G
For automotive or high-reliability applications: EMZA350ARA101MHA0G, 35TKV100M8X10.5, 35TLV100M8X10.5, 35TZV100M8X10.5
For extended lifetime requirements: 35TLV100M8X10.5 (5000 Hrs @ 105°C)
For higher ripple current or lower impedance: 35TKV100M8X10.5 (850 mA @ 100 kHz, 80 mOhms)
For voltage margin: EMVY500ARA101MHA0G or 50JGV100M8X10.5 (50 V rating)

All recommended substitutes are ROHS3 compliant and in active production, ensuring supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can EMVY350ARA101MHA0G be used as a direct replacement for MVY35VC101MH10TP?

A: Yes. EMVY350ARA101MHA0G is a parametric equivalent with identical capacitance (100 µF), voltage rating (35 V), tolerance (±20%), lifetime (2000 Hrs @ 105°C), and physical dimensions (0.315" Dia, 0.394" height). The primary difference is ROHS3 compliance and active production status. No circuit modifications are required.

Q: What is the difference between the 35 V and 50 V rated substitutes?

A: The 50 V rated parts (EMVY500ARA101MHA0G, 50JGV100M8X10.5) provide higher voltage margin and are suitable for circuits operating at or near 35 V where transient protection is required. The 35 V rated parts are suitable for circuits with stable 35 V or lower operating voltage. Both maintain identical 100 µF capacitance and ±20% tolerance.

Q: Why do some substitutes have different heights (0.394" vs. 0.413")?

A: Height variation reflects different internal construction and performance characteristics. EMVY350ARA101MHA0G maintains the original 0.394" height. Upgraded alternatives (EMZA350ARA101MHA0G, Rubycon TKV/TLV/TZV/JZV series) use 0.413" height to accommodate enhanced ripple current and lower impedance designs. PCB layout must accommodate the taller component, or the 0.394" height part must be selected.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive industry standard for aluminum electrolytic capacitors. Parts carrying this rating (EMZA350ARA101MHA0G, 35JGV100M8X10.5, 35JZV100M8X10.5, 35TKV100M8X10.5, 35TLV100M8X10.5, 35TZV100M8X10.5) meet stringent reliability and performance requirements for automotive applications, including thermal cycling, vibration, and humidity testing.

Q: Is the original MVY35VC101MH10TP still available?

A: The MVY35VC101MH10TP is classified as obsolete. While limited inventory may exist in distribution channels, it is no longer in active production. EMVY350ARA101MHA0G or other active alternatives are recommended for new designs and ongoing production.

Q: What is the difference between ripple current ratings at different frequencies?

A: Ripple current capacity varies with frequency. Higher frequencies (100 kHz) typically show higher ripple current ratings than lower frequencies (10 kHz or 120 Hz). The original part specifies 450 mA @ 100 kHz. Substitutes must support the ripple current requirements of the specific application frequency.

Q: Can I use a substitute with lower ripple current rating?

A: No. The substitute must support or exceed the ripple current requirements of the application. Using a part with insufficient ripple current rating results in excessive heating and reduced component lifetime.

Q: What does impedance (mOhms) indicate?

A: Impedance represents the effective series resistance at a specific frequency. Lower impedance indicates better high-frequency performance and lower voltage drop under ripple current conditions. The original part specifies 300 mOhms. Upgraded alternatives offer 80–160 mOhms, providing superior performance in high-frequency applications.

Q: Are all substitutes RoHS compliant?

A: All recommended active substitutes are ROHS3 compliant. The original MVY35VC101MH10TP is RoHS non-compliant. ROHS3 compliance is required for new designs and many regulated markets.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. Both the original part and all substitutes carry MSL 1 rating, requiring no special moisture control during storage or handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message