Equivalent & Substitute Parts for MVY25VC331MH10TP

Part Overview

The MVY25VC331MH10TP is a 330 µF, 25 V aluminum electrolytic capacitor manufactured by Chemi-Con in the MVY series. This surface mount component is rated for 2000 hours at 105°C and is classified as obsolete. The part operates across a temperature range of -55°C to 105°C with ±20% capacitance tolerance and is designed for general-purpose applications.

Due to its obsolete product status, equivalent and substitute parts from active manufacturers are necessary to maintain design continuity and ensure long-term component availability for production and field replacement applications.

Key Parameters

Parameter	Value	Unit
Capacitance	330	µF
Voltage Rating	25	V
Tolerance	±20	%
Lifetime @ 105°C	2000	Hrs
Operating Temperature Range	-55 to 105	°C
Polarization	Polar	—
Mounting Type	Surface Mount	—
Package Type	Radial, Can - SMD	—
Case Diameter	0.315 (8.00)	in (mm)
Height Maximum	0.394 (10.00)	in (mm)
Land Size	0.327 x 0.327 (8.30 x 8.30)	in x in (mm x mm)
Ripple Current @ 100 kHz	450	mA
Impedance	300	mOhms
RoHS Status	Non-compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the MVY25VC331MH10TP is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Capacitance: 330 µF (exact match required)
Voltage Rating: 25 V (exact match required)
Tolerance: ±20% (exact match required)
Polarization: Polar (exact match required)
Mounting Type: Surface Mount (exact match required)
Package Type: Radial, Can - SMD (exact match required)
Case Diameter: 0.315 in (8.00 mm) (exact match required)
Land Size: 0.327 x 0.327 in (8.30 x 8.30 mm) (exact match required)

Secondary Compatibility Parameters:

Operating Temperature Range: -55°C to 105°C (minimum requirement)
Lifetime @ 105°C: 2000 hours (minimum requirement)
Ripple Current @ 100 kHz: 450 mA (minimum requirement)
MSL Rating: 1 (Unlimited) (exact match required)

Height Tolerance: Maximum seated height may extend to 0.413 in (10.50 mm) for upgraded substitutes, provided PCB layout accommodates the additional 0.019 in (0.50 mm) clearance.

Substitutes are classified into two categories:

Parametric Equivalents: Parts matching all primary criteria with identical or superior secondary parameters, maintaining the same series designation or direct lineage.
Upgrade Substitutes: Parts exceeding minimum specifications in ripple current capacity, ESR performance, or thermal lifetime, with AEC-Q200 automotive qualification and RoHS3 compliance.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Series	Capacitance (µF)	Voltage (V)	Tolerance (%)	Lifetime @ 105°C (Hrs)	Height Max (in / mm)	Ripple Current @ 100 kHz (mA)	Impedance (mOhms)	Product Status	RoHS Status	AEC-Q200
MVY25VC331MH10TP	Chemi-Con	MVY	330	25	±20	2000	0.394 / 10.00	450	300	Obsolete	Non-compliant	—
EMVY250ARA331MHA0G	Chemi-Con	Alchip™- MVY	330	25	±20	2000	0.394 / 10.00	450	300	Active	RoHS3 Compliant	—
EMZA250ARA331MHA0G	Chemi-Con	Alchip™- MZA	330	25	±20	2000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
EMZJ250ARA331MHA0G	Chemi-Con	Alchip™- MZJ	330	25	±20	2000	0.406 / 10.30	850	80	Active	RoHS3 Compliant	Yes
25JZV330M8X10.5	Rubycon	JZV	330	25	±20	2000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
25TKV330M8X10.5	Rubycon	TKV	330	25	±20	2000	0.413 / 10.50	850	80	Active	RoHS3 Compliant	Yes
25TLV330M8X10.5	Rubycon	TLV	330	25	±20	5000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
25TZV330M8X10.5	Rubycon	TZV	330	25	±20	2000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
AFK337M25F24T-F	Cornell Dubilier Electronics (CDE)	AFK	330	25	±20	2000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
EEE-FK1E331P	Panasonic Electronic Components	FK	330	25	±20	2000	0.413 / 10.50	600	160	Active	RoHS3 Compliant	Yes
EEE-FT1V331GP	Panasonic Electronic Components	FT	330	35	±20	5000	0.413 / 10.50	850	80	Active	RoHS3 Compliant	Yes

Engineering Selection Recommendations

Parametric Equivalent (Direct Replacement):

EMVY250ARA331MHA0G is the primary parametric equivalent. This part maintains identical electrical and mechanical specifications to the MVY25VC331MH10TP while offering active product status and RoHS3 compliance. The Alchip™- MVY series designation indicates direct lineage from the original MVY series. This part is suitable for applications where general-purpose performance and existing design parameters must be preserved without modification.

Upgrade Substitutes for Enhanced Performance:

For applications requiring improved ripple current handling or reduced ESR, the following upgrade substitutes are available:

EMZJ250ARA331MHA0G (Chemi-Con Alchip™- MZJ series) provides 850 mA ripple current capacity at 100 kHz and 80 mOhm ESR, with AEC-Q200 automotive qualification. Height increases to 0.406 in (10.30 mm).

25TKV330M8X10.5 (Rubycon TKV series) delivers 850 mA ripple current and 80 mOhm ESR with AEC-Q200 rating. Height extends to 0.413 in (10.50 mm).

EMZA250ARA331MHA0G (Chemi-Con Alchip™- MZA series) offers 600 mA ripple current and 160 mOhm ESR with AEC-Q200 qualification. Height is 0.413 in (10.50 mm).

25TLV330M8X10.5 (Rubycon TLV series) extends thermal lifetime to 5000 hours at 105°C while maintaining 600 mA ripple current and 160 mOhm ESR. AEC-Q200 rated. Height is 0.413 in (10.50 mm).

Higher Voltage Alternative:

EEE-FT1V331GP (Panasonic FT series) provides 35 V rating with 330 µF capacitance, 5000-hour lifetime at 105°C, 850 mA ripple current, and 80 mOhm ESR. This part is suitable for designs requiring voltage margin above 25 V. AEC-Q200 qualified and RoHS3 compliant. Height is 0.413 in (10.50 mm).

Compliance Considerations:

All recommended substitutes carry RoHS3 compliance and AEC-Q200 automotive qualification, ensuring regulatory alignment and quality assurance for automotive and industrial applications. The original MVY25VC331MH10TP is RoHS non-compliant; substitution with any active-status part addresses this compliance gap.

Frequently Asked Questions (FAQ)

Q: Can EMVY250ARA331MHA0G be used as a direct drop-in replacement for MVY25VC331MH10TP?

A: Yes. EMVY250ARA331MHA0G is a parametric equivalent with identical capacitance (330 µF), voltage rating (25 V), tolerance (±20%), lifetime (2000 Hrs @ 105°C), case diameter (0.315 in / 8.00 mm), height (0.394 in / 10.00 mm), and land size (0.327 x 0.327 in / 8.30 x 8.30 mm). No PCB layout modification is required. The part is active and RoHS3 compliant.

Q: What is the difference between parametric equivalents and upgrade substitutes?

A: Parametric equivalents match all electrical and mechanical specifications of the original part. Upgrade substitutes exceed minimum performance criteria in ripple current capacity, ESR, or thermal lifetime while maintaining the same capacitance, voltage, and physical footprint. Upgrade substitutes may have slightly increased height (up to 0.413 in / 10.50 mm) and require PCB clearance verification.

Q: Can parts with 0.413 in (10.50 mm) height be used in designs specified for 0.394 in (10.00 mm) height?

A: Only if PCB layout provides minimum 0.019 in (0.50 mm) additional clearance above the component. Verify clearance against adjacent components, solder mask, and conformal coating thickness. If clearance is insufficient, use EMVY250ARA331MHA0G or EMZJ250ARA331MHA0G (0.406 in / 10.30 mm height).

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is the automotive electronics council qualification standard for aluminum electrolytic capacitors. It certifies that the component meets automotive industry reliability, performance, and environmental stress testing requirements. All upgrade substitutes carry this certification; the original MVY25VC331MH10TP does not.

Q: Why is ESR (Equivalent Series Resistance) important in capacitor selection?

A: ESR affects ripple current handling, thermal performance, and circuit stability. Lower ESR (80 mOhm) provides better high-frequency performance and reduced heat generation compared to higher ESR (300 mOhm). For applications with high ripple current or stringent thermal requirements, select substitutes with 80 mOhm ESR.

Q: Is EEE-FT1V331GP compatible with a 25 V design?

A: Yes. EEE-FT1V331GP is rated for 35 V, which exceeds the 25 V requirement. The higher voltage rating provides design margin and does not affect circuit operation at 25 V. However, verify that the 5000-hour lifetime at 105°C and 80 mOhm ESR are acceptable for the application. Height is 0.413 in (10.50 mm); confirm PCB clearance.

Q: What is the MSL (Moisture Sensitivity Level) rating, and why is it 1?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed substitutes carry MSL 1 rating, matching the original part's moisture tolerance.

Q: Can I use multiple lower-capacitance parts in parallel to replace the 330 µF capacitor?

A: Parallel configurations are outside the scope of this equivalent parts reference. Consult circuit design documentation and thermal analysis before implementing parallel topologies.

Q: What is the difference between Chemi-Con, Rubycon, Panasonic, and Cornell Dubilier substitutes?

A: All manufacturers listed produce aluminum electrolytic capacitors meeting the specified electrical and mechanical parameters. Selection among manufacturers depends on supply chain availability, cost, lead time, and established design qualification history. All recommended substitutes are active products with RoHS3 compliance and AEC-Q200 certification.

Q: Is packaging (Tape & Reel vs. bulk) a substitution factor?

A: Packaging format does not affect electrical or mechanical compatibility. The original MVY25VC331MH10TP is listed with "-" packaging; all substitutes are available in Tape & Reel (TR) format for automated assembly. Confirm packaging availability with your component supplier.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message