Equivalent & Substitute Parts for MVY10VC332MM17TP

Part Overview

The MVY10VC332MM17TP is a 3300 µF, 10 V aluminum electrolytic capacitor manufactured by Chemi-Con in the MVY series. This surface mount radial can capacitor is designed for general purpose applications with a rated lifetime of 5000 hours at 105°C. The part is currently obsolete, necessitating identification of equivalent and substitute components that maintain functional compatibility or provide enhanced performance characteristics for ongoing production and field replacement requirements.

Key Parameters

Parameter	Value
Capacitance	3300 µF
Voltage Rating	10 V
Tolerance	±20%
Lifetime @ Temperature	5000 Hrs @ 105°C
Operating Temperature Range	-55°C ~ 105°C
Polarization	Polar
Package Type	Radial, Can - SMD
Mounting Type	Surface Mount
Physical Dimensions	0.709" Dia (18.00mm) × 0.650" Height (16.50mm)
Surface Mount Land Size	0.748" L × 0.748" W (19.00mm × 19.00mm)
Impedance	54 mOhms
Ripple Current @ 100 kHz	1.35 A
RoHS Status	Non-compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MVY10VC332MM17TP is determined by the following critical parameters:

Mandatory Compatibility Parameters:

Capacitance: 3300 µF (exact match required)
Tolerance: ±20% (exact match required)
Voltage Rating: 10 V minimum (equal or higher voltage ratings are acceptable)
Package Type: Radial, Can - SMD (physical form factor)
Mounting Type: Surface Mount
Operating Temperature Range: -55°C ~ 105°C minimum
Lifetime: 5000 Hrs @ 105°C minimum
Polarization: Polar

Acceptable Variation Parameters:

Voltage Rating: Substitutes rated at 16 V or 25 V are acceptable upgrades
Physical Height: Variations within 0.019" (0.50mm) are acceptable
Surface Mount Land Size: Minor variations acceptable if within PCB layout constraints
Impedance: Lower impedance values indicate improved performance
Ripple Current: Higher values indicate enhanced capability
RoHS Compliance: Active status parts with RoHS3 compliance are preferred over obsolete non-compliant parts

Substitute parts are grouped into two categories:

Category 1 - Parametric Equivalent (Same Voltage Rating): EMVY100GRA332MMH0S maintains identical electrical specifications (3300 µF, 10 V, ±20%) while offering active product status and RoHS3 compliance.

Category 2 - Voltage Upgrade Substitutes (Higher Voltage Rating): EMVY160GRA332MMH0S, 16TLV3300M18X16.5, and AFK338M25R44T-F provide higher voltage ratings (16 V or 25 V) with identical capacitance and tolerance, enabling direct substitution with improved voltage margin and reliability.

Parameter Comparison

Parameter	MVY10VC332MM17TP	EMVY100GRA332MMH0S	EMVY160GRA332MMH0S	16TLV3300M18X16.5	AFK338M25R44T-F
Manufacturer	Chemi-Con	Chemi-Con	Chemi-Con	Rubycon	Cornell Dubilier Electronics
Capacitance	3300 µF	3300 µF	3300 µF	3300 µF	3300 µF
Voltage Rating	10 V	10 V	16 V	16 V	25 V
Tolerance	±20%	±20%	±20%	±20%	±20%
Lifetime @ 105°C	5000 Hrs	5000 Hrs	5000 Hrs	5000 Hrs	5000 Hrs
Operating Temperature	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C	-55°C ~ 105°C
Polarization	Polar	Polar	Polar	Polar	Polar
Package Type	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD	Radial, Can - SMD
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Diameter	0.709" (18.00mm)	0.709" (18.00mm)	0.709" (18.00mm)	0.709" (18.00mm)	0.709" (18.00mm)
Height (Max)	0.650" (16.50mm)	0.650" (16.50mm)	0.650" (16.50mm)	0.669" (17.00mm)	0.669" (17.00mm)
Land Size	0.748" L × 0.748" W (19.00mm × 19.00mm)	0.748" L × 0.748" W (19.00mm × 19.00mm)	0.748" L × 0.748" W (19.00mm × 19.00mm)	0.748" L × 0.748" W (19.00mm × 19.00mm)	0.748" L × 0.827" W (19.00mm × 21.00mm)
Impedance	54 mOhms	54 mOhms	54 mOhms	44 mOhms	33 mOhms
Ripple Current @ 100 kHz	1.35 A	1.35 A	1.35 A	2.06 A	2.06 A
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Certifications	None listed	None listed	None listed	AEC-Q200	AEC-Q200
Applications	General Purpose	General Purpose	General Purpose	Automotive	Automotive, Bypass, Decoupling

Engineering Selection Recommendations

Primary Recommendation - Parametric Equivalent:

EMVY100GRA332MMH0S is the direct parametric equivalent for MVY10VC332MM17TP. This Chemi-Con part maintains identical electrical specifications (3300 µF, 10 V, ±20% tolerance) and physical dimensions while offering active product status and ROHS3 compliance. Selection of this part eliminates obsolescence risk and satisfies modern regulatory requirements without circuit redesign.

Secondary Recommendation - Voltage Upgrade (16 V Rating):

EMVY160GRA332MMH0S and 16TLV3300M18X16.5 are suitable upgrades for applications where circuit voltage margins permit. Both parts maintain 3300 µF capacitance and ±20% tolerance while providing 16 V voltage rating. The Rubycon 16TLV3300M18X16.5 offers AEC-Q200 automotive qualification and improved ripple current handling (2.06 A @ 100 kHz versus 1.35 A). Height variation of 0.019" (0.50mm) requires PCB layout verification.

Tertiary Recommendation - Voltage Upgrade (25 V Rating):

AFK338M25R44T-F from Cornell Dubilier Electronics provides maximum voltage margin at 25 V rating with identical 3300 µF capacitance. This part delivers superior performance characteristics including lowest impedance (33 mOhms), highest ripple current capability (2.06 A @ 100 kHz), and AEC-Q200 automotive certification. Surface mount land size variation (0.827" W versus 0.748" W) requires PCB layout compatibility verification. Height increase of 0.019" (0.50mm) must be confirmed against mechanical constraints.

Compliance Consideration:

All recommended substitutes are ROHS3 compliant and REACH unaffected, addressing regulatory requirements not met by the obsolete MVY10VC332MM17TP.

Frequently Asked Questions (FAQ)

Q: Can EMVY100GRA332MMH0S be used as a direct replacement for MVY10VC332MM17TP?

A: Yes. EMVY100GRA332MMH0S is a parametric equivalent with identical capacitance (3300 µF), voltage rating (10 V), tolerance (±20%), and physical dimensions. No circuit modifications are required. The primary advantage is active product status and ROHS3 compliance.

Q: What is the difference between a parametric equivalent and a voltage upgrade substitute?

A: A parametric equivalent maintains all electrical specifications including voltage rating. Voltage upgrade substitutes provide higher voltage ratings (16 V or 25 V) while maintaining capacitance and tolerance. Voltage upgrades are suitable only when circuit design permits higher voltage components and when mechanical constraints (height, land size) are satisfied.

Q: Are the 16 V and 25 V rated parts backward compatible with the original 10 V design?

A: Electrical compatibility is confirmed. Higher voltage rated capacitors operate safely in lower voltage circuits. However, physical compatibility must be verified: 16TLV3300M18X16.5 and AFK338M25R44T-F have increased height (0.669" versus 0.650") and AFK338M25R44T-F has increased land width (0.827" versus 0.748"). PCB layout must accommodate these variations.

Q: What does AEC-Q200 certification indicate?

A: AEC-Q200 is an automotive qualification standard. Parts bearing this certification (16TLV3300M18X16.5 and AFK338M25R44T-F) have undergone rigorous testing for automotive applications. This certification is not required for general purpose applications but indicates enhanced reliability and quality assurance.

Q: Why does AFK338M25R44T-F have lower impedance than other substitutes?

A: Impedance is determined by internal construction and materials. AFK338M25R44T-F specifies 33 mOhms at 100 kHz compared to 54 mOhms for MVY10VC332MM17TP. Lower impedance indicates reduced internal resistance and improved high-frequency performance, beneficial for ripple current handling and thermal management.

Q: Can I use AFK338M25R44T-F if my PCB layout is designed for 0.748" × 0.748" land size?

A: AFK338M25R44T-F requires 0.748" L × 0.827" W land size. The width increase of 0.079" (2.00mm) exceeds the original specification. PCB layout modification is necessary. Verify available space before selection.

Q: What is the significance of ripple current ratings?

A: Ripple current rating indicates the maximum AC current the capacitor can handle at specified frequency without exceeding temperature limits. Higher ripple current capability (2.06 A @ 100 kHz for 16TLV3300M18X16.5 and AFK338M25R44T-F versus 1.35 A for MVY10VC332MM17TP) provides design margin and improved thermal performance in high-frequency applications.

Q: Are all substitute parts available in the same packaging format?

A: EMVY100GRA332MMH0S and EMVY160GRA332MMH0S are supplied in standard packaging. 16TLV3300M18X16.5 is specified as Tape & Reel (TR). AFK338M25R44T-F is specified as Tape & Reel (TR). Verify packaging requirements for your procurement and assembly processes.

Q: What is MSL 1 rating?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture baking requirements. All listed parts carry MSL 1 rating, confirming compatibility with standard storage and handling procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message