MVH63VC22RMH10TP Equivalent & Substitute Parts

Part Overview

The MVH63VC22RMH10TP is a 22 µF, 63 V aluminum electrolytic capacitor in surface mount radial can package manufactured by Chemi-Con. This component is classified as obsolete, indicating it is no longer in active production. The part operates across a temperature range of -40°C to 125°C with a rated lifetime of 2000 hours at 125°C. Due to its obsolete status, equivalent and substitute parts from active manufacturers are necessary for ongoing design support and procurement continuity.

Substiute Parts

MVH63VC22RMH10TP

Chemi-ConIn Stock: 1080MVH63VC22RMH10TP Datasheet

Current PartRFQ

EEE-TG1K220UP

Panasonic Electronic ComponentsIn Stock: 1747EEE-TG1K220UP Datasheet

UpgradeRFQ

EEE-TG2A220UP

Panasonic Electronic ComponentsIn Stock: 5128EEE-TG2A220UP Datasheet

UpgradeRFQ

UCZ1J220MCL1GS

NichiconIn Stock: 2501UCZ1J220MCL1GS Datasheet

UpgradeRFQ

EEE-TG1J220P

Panasonic Electronic ComponentsIn Stock: 12492EEE-TG1J220P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MVH63VC22RMH10TP is determined by the following critical parameters:

Primary Substitution Criteria:

• Capacitance value: 22 µF (exact match required)
• Tolerance: ±20% (exact match required)
• Voltage rating: 63 V minimum (equal or higher voltage ratings are acceptable)
• Polarization: Polar (exact match required)
• Package type: Radial, Can - SMD (exact match required)
• Physical dimensions: 0.315" diameter (8.00 mm) with compatible height and land size
• Mounting type: Surface Mount (exact match required)
• Operating temperature range: -40°C ~ 125°C (exact match required)

Substitution Categories:

Direct Equivalents (Same Voltage Rating): Parts with identical 63 V voltage rating, 22 µF capacitance, and compatible physical/electrical specifications from active manufacturers.

Upgrade Substitutes (Higher Voltage Rating): Parts with 80 V or 100 V voltage ratings that maintain all other critical parameters. Higher voltage ratings provide enhanced reliability margin while maintaining backward compatibility in circuits designed for 63 V operation.

Compatible Alternatives (Same Voltage, Different Characteristics): Parts with 63 V rating and 22 µF capacitance but different ESR or lifetime specifications that remain functionally compatible within the application envelope.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Same Electrical Performance):

EEE-TG1J220P from Panasonic Electronic Components is the primary direct equivalent. This part maintains the 63 V voltage rating, 22 µF capacitance, and ±20% tolerance of the original MVH63VC22RMH10TP. The EEE-TG1J220P is in active production status with ROHS3 compliance and AEC-Q200 automotive rating. Physical dimensions are compatible with the original design, with a maximum seated height of 0.402" (10.20 mm) compared to the original 0.394" (10.00 mm). This minimal height difference remains within typical PCB layout tolerances for surface mount applications.

For Enhanced Reliability (Higher Voltage Rating):

EEE-TG1K220UP (80 V) and EEE-TG2A220UP (100 V) from Panasonic Electronic Components provide voltage margin upgrades while maintaining all other critical specifications. Both parts are active products with ROHS3 compliance and AEC-Q200 ratings. The 80 V and 100 V ratings are backward compatible in circuits designed for 63 V operation, providing enhanced reliability margin. These parts feature identical land sizes and compatible physical dimensions. The EEE-TG2A220UP with 100 V rating offers the highest reliability margin and has the largest inventory availability (5096 pcs).

For Alternative Sourcing (Same Voltage, Different Manufacturer):

UCZ1J220MCL1GS from Nichicon maintains the 63 V rating and 22 µF capacitance with improved ESR performance (700 mOhm versus 1 Ohm) and extended lifetime (3000 hours versus 2000 hours at 125°C). However, this part is classified as "Not For New Designs," limiting its suitability for new product development. The maximum seated height of 0.413" (10.50 mm) is slightly higher than the original specification and requires PCB layout verification.

Compliance Considerations:

The original MVH63VC22RMH10TP is RoHS non-compliant. All recommended substitute parts (EEE-TG1J220P, EEE-TG1K220UP, EEE-TG2A220UP) are ROHS3 compliant, meeting current environmental and regulatory requirements. For applications requiring automotive qualification, Panasonic parts carry AEC-Q200 certification.

Frequently Asked Questions (FAQ)

Q: Can EEE-TG1K220UP (80 V) or EEE-TG2A220UP (100 V) be used as direct replacements for the 63 V MVH63VC22RMH10TP?

A: Yes. Higher voltage-rated capacitors are functionally compatible in circuits designed for lower voltage operation. The 80 V and 100 V parts maintain identical capacitance (22 µF), tolerance (±20%), physical dimensions, and land sizes. The higher voltage rating provides additional reliability margin without affecting circuit performance.

Q: What is the significance of the height difference between the original part (0.394") and substitute parts (0.402" to 0.413")?

A: The height differences of 0.008" to 0.019" (0.20 mm to 0.48 mm) are within typical PCB design tolerances for surface mount components. These variations do not affect electrical performance or standard PCB assembly processes. Verify clearance in your specific PCB layout if height-constrained applications are present.

Q: Why is the UCZ1J220MCL1GS marked "Not For New Designs"?

A: This designation indicates the part is in mature production phase with limited design support from the manufacturer. While the part remains available and functional, Panasonic alternatives (EEE-TG series) are preferred for new product development due to active status and ongoing technical support.

Q: Are there differences in ESR (Equivalent Series Resistance) between the substitute parts?

A: Yes. The original MVH63VC22RMH10TP specifies 1 Ohm @ 120 Hz. Substitute parts vary: EEE-TG1J220P is 1 Ohm @ 100 kHz, EEE-TG1K220UP and EEE-TG2A220UP are 1.3 Ohm @ 100 kHz, and UCZ1J220MCL1GS is 700 mOhm. These differences reflect measurement frequency variations and manufacturing differences. All values remain within acceptable ranges for general purpose and automotive applications.

Q: What is the difference between Tape & Reel (TR) packaging and the original packaging?

A: All substitute parts are supplied in Tape & Reel format, which is standard for high-volume surface mount assembly. This packaging format is compatible with automated pick-and-place equipment used in modern PCB manufacturing. The original part's packaging format is not specified in the available data.

Q: Which substitute part offers the best long-term availability?

A: EEE-TG2A220UP (100 V) from Panasonic has the highest inventory availability (5096 pcs) and active product status, indicating strong manufacturer commitment to continued production. EEE-TG1J220P (63 V) also has substantial inventory (12453 pcs) and active status, making it the second choice for long-term availability.

Q: Are all substitute parts RoHS compliant?

A: All recommended substitute parts (EEE-TG1J220P, EEE-TG1K220UP, EEE-TG2A220UP) are ROHS3 compliant. The original MVH63VC22RMH10TP is RoHS non-compliant. If RoHS compliance is required for your application, substitute parts must be selected from the Panasonic EEE-TG series.

Q: Can the substitute parts be used in automotive applications?

A: EEE-TG1J220P, EEE-TG1K220UP, and EEE-TG2A220UP all carry AEC-Q200 automotive qualification. UCZ1J220MCL1GS does not list automotive ratings. For automotive applications, Panasonic parts are the appropriate choice.